MCP6474-E/ST
- Mfr.Part #
- MCP6474-E/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 14-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 14TSSOP
- Stock
- 8,044
- In Stock :
- 8,044
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Radiation Hardening :
- No
- Nominal Supply Current :
- 100μA
- Unity Gain BW-Nom :
- 2000 kHz
- Gain Bandwidth Product :
- 2MHz
- Peak Reflow Temperature (Cel) :
- 260
- Terminal Position :
- Dual
- Package / Case :
- 14-TSSOP (0.173, 4.40mm Width)
- Amplifier Type :
- GENERAL PURPOSE
- Dimensions :
- 5.1 x 4.5 x 1.05mm
- Bandwidth :
- 2MHz
- Number of Channels per Chip :
- 4
- Input Offset Voltage-Max :
- 1500 µV
- JESD-609 Code :
- e3
- Shutdown :
- No Shutdown
- Package Shape :
- RECTANGULAR
- Product :
- Operational Amplifiers
- Pin Count :
- 14
- Supplier Device Package :
- 14-TSSOP
- Output Current :
- 10mA
- Output Current per Channel :
- 10mA
- Max Frequency :
- 10kHz
- Terminal Pitch :
- 0.65mm
- Base Product Number :
- MCP6474
- Qualification :
- AEC-Q100
- Number of Terminals :
- 14
- Mounting Type :
- Surface Mount
- Surface Mount :
- yes
- Number of Functions :
- 4
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Current - Input Bias :
- 1pA
- Voltage - Input Offset :
- 1.5mV
- Rail to Rail :
- Rail to Rail Input/Output
- Type :
- General Purpose Amplifier
- JESD-30 Code :
- R-PDSO-G14
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Voltage Gain :
- 115dB
- Height :
- 1.05mm
- Mounting :
- Surface Mount
- Seated Height-Max :
- 1.2 mm
- Power Supply Rejection Ratio (PSRR) :
- 91dB
- Input Offset Voltage (Vos) :
- 1.5mV
- Supply Voltage :
- 3V
- Published :
- 2013
- HTS Code :
- 8542.33.00.01
- Manufacturer :
- Microchip
- Length :
- 5.1mm
- Number of Circuits :
- 4
- Mount :
- Surface Mount
- Mounting Style :
- SMD/SMT
- Factory Lead Time :
- 2 Weeks
- MSL :
- -
- Product Category :
- Operational Amplifiers - Op Amps
- Supplier Package :
- TSSOP
- Package Type :
- TSSOP
- Current - Output / Channel :
- 32 mA
- REACH SVHC :
- No SVHC
- Minimum Operating Temperature :
- -40 °C
- Slew Rate :
- 1.1V/μs
- Number of Pins :
- 14
- ECCN Code :
- EAR99
- Number of Terminations :
- 14
- Operating Temperature :
- -40°C~125°C
- Product Type :
- Op Amps - Operational Amplifiers
- Reach Compliance Code :
- Compliant
- Current - Supply :
- 100μA
- RoHS Status :
- ROHS3 Compliant
- Power Supply Type :
- Single
- Temperature Grade :
- Automotive
- Shut Down Support :
- No
- Maximum Operating Temperature :
- +125 °C
- Screening Level :
- Extended Industrial
- Brand :
- Microchip Technology / Atmel
- Base Part Number :
- MCP6474
- Number of Channels :
- 4
- Output Type :
- Rail-to-Rail
- Series :
- --
- RoHS :
- Details
- Terminal Form :
- Gull wing
- Supply Voltage Limit-Max :
- 6.5V
- Voltage - Supply, Single/Dual (±) :
- 2V~5.5V ±1V~2.75V
- Packaging :
- Tube
- Product Status :
- Active
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Package :
- Tube
- Operating Supply Voltage :
- 5.5 V
- Common Mode Rejection Ratio :
- 65 dB
- Width :
- 4.5mm
- Maximum Operating Supply Voltage :
- 5.5 V
- Operating Supply Current :
- 100 uA
- Datasheets
- MCP6474-E/ST

4 Channels 10mA per Channel 1pA 65 dB Instrumentational OP Amps 5.5 V 2V~5.5V ±1V~2.75V MCP6474 14 Pins 14-TSSOP (0.173, 4.40mm Width)
MCP6474-E/ST Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 100 uA and 10 . 115dB should remain the voltage gain. In total, there are 4 circuits on this buffer amplifier. Buffer op amp is equipped with 4 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5.5 V. This electronic part is recommended to be used with an 100µA supply for best performance. -- is the number that corresponds to the series of the buffer op amp. As part of this op amp ic, there are 14 terminals on which wires can be connected.
MCP6474-E/ST Features
14 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
14Terminations
MCP6474-E/ST Applications
There are a lot of Microchip Technology
MCP6474-E/ST Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















