MCP6471T-E/OT
- Mfr.Part #
- MCP6471T-E/OT
- Manufacturer
- Microchip Technology
- Package / Case
- SC-74A, SOT-753
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT SOT23-5
- Stock
- 2,579
- In Stock :
- 2,579
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage Gain :
- 115dB
- Low-Offset :
- No
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Factory Lead Time :
- 10 Weeks
- Voltage - Supply, Single/Dual (±) :
- 2V~5.5V ±1V~2.75V
- Supply Voltage :
- 3V
- Number of Amplifiers :
- 1
- Number of Channels per Chip :
- 1
- Base Product Number :
- MCP6471
- Single Supply Voltage (Max) :
- 5.5(V)
- Supply Voltage Limit-Max :
- 6.5 V
- Width :
- 1.8mm
- JESD-609 Code :
- e3
- Power Supplies :
- 2.5/5 V
- Single Supply Voltage (Min) :
- 2(V)
- Gain Bandwidth Product :
- 2MHz
- JESD-30 Code :
- R-PDSO-G5
- Maximum Operating Temperature :
- + 125 C
- Package / Case :
- SC-74A, SOT-753
- Unity Gain BW-Nom :
- 2000 kHz
- Operating Temp Range :
- -40C to 125C
- Type :
- GENERAL PURPOSE
- Reach Compliance Code :
- Compliant
- Current - Input Bias :
- 1pA
- Maximum Input Offset Current :
- 0.0000001(TYP)@5.5V
- Number of Terminals :
- 5
- Unity Gain Bandwidth Product :
- 2
- Voltage Gain-Min :
- 56200
- Peak Reflow Temperature (Cel) :
- 260
- Number of Pins :
- 5
- Voltage Gain dB :
- 115 dB
- Mounting Style :
- SMD/SMT
- Terminal Pitch :
- 0.95 mm
- Nominal Supply Current :
- 100μA
- Packaging :
- Tape and Reel (TR)
- Product Type :
- Op Amps - Operational Amplifiers
- Architecture :
- VOLTAGE-FEEDBACK
- Power Supply Rejection Ratio (PSRR) :
- 75dB
- Operating Supply Voltage :
- 7.6, 20 V
- HTS Code :
- 8542.33.00.01
- Shutdown :
- No Shutdown
- Published :
- 2007
- Min Operating Temperature :
- -40 °C
- Packing Method :
- Tape and Reel
- Supplier Device Package :
- SOT-23-5
- Product Category :
- Operational Amplifiers - Op Amps
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Supplier Package :
- SOT-23
- Operating Temperature Classification :
- Automotive
- Max Frequency :
- 10kHz
- RoHS :
- Details
- Mounting :
- Surface Mount
- Voltage - Input Offset :
- 1.5mV
- Amplifier Type :
- GENERAL PURPOSE
- Lead Free :
- Lead Free
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Input Offset Voltage :
- (mV)
- Number of Channels :
- 1
- Minimum Operating Temperature :
- - 40 C
- Product Status :
- Active
- Power Supply Rejection Ratio :
- 75(dB)
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Operating Supply Current :
- 100@2V to 5.5V uA
- Mounting Type :
- Surface Mount
- Max Supply Voltage :
- 5.5 V
- Supply Current-Max :
- 0.2 mA
- Number of Circuits :
- 1
- Power Supply Requirement :
- Single
- ECCN Code :
- EAR99
- Programmable Power :
- No
- Slew Rate :
- 1.1V/μs
- Qualification Status :
- Not Qualified
- Package Shape :
- RECTANGULAR
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Package Type :
- SOT-23
- Supply Type :
- Single
- Wideband :
- No
- Terminal Position :
- Dual
- Bandwidth :
- 2MHz
- Common Mode Rejection Ratio :
- 65 dB
- Voltage Gain in dB :
- 115(dB)
- Frequency Compensation :
- yes
- Length :
- 3.1mm
- Micropower :
- yes
- Rad Hardened :
- No
- Number of Terminations :
- 5
- Input Offset Voltage (Vos) :
- -1.5mV
- Input Offset Voltage-Max :
- 1500 µV
- Dual Supply Voltage (Max) :
- Not Required(V)
- REACH SVHC :
- No SVHC
- Input Bias Current :
- 350 pA
- Base Part Number :
- MCP6471
- Height :
- 1.3mm
- Operating Temperature :
- -40°C~125°C
- RoHS Status :
- ROHS3 Compliant
- Screening Level :
- Extended Industrial
- Temperature Grade :
- Automotive
- Surface Mount :
- yes
- Single Supply Voltage (Typ) :
- 3/5(V)
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Max Operating Temperature :
- 125 °C
- Power Supply Type :
- Single
- Terminal Form :
- Gull wing
- Min Supply Voltage :
- 2 V
- Power :
- No
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Number of Elements :
- 1
- Common-mode Reject Ratio-Min :
- 65 dB
- Number of Functions :
- 1
- Seated Height-Max :
- 1.45 mm
- Qualification :
- AEC-Q100
- Series :
- --
- Output Current per Channel :
- 10 mA
- Product :
- Operational Amplifiers
- Input Voltage Noise Density :
- 27nV/sqrt Hz
- MSL :
- MSL 1 - Unlimited
- Output Type :
- Rail-to-Rail
- Manufacturer :
- Microchip
- Brand :
- Microchip Technology / Atmel
- Current - Supply :
- 100μA
- Shut Down Feature :
- No
- Pin Count :
- 5
- Dual Supply Voltage (Min) :
- Not Required(V)
- Low-Bias :
- yes
- Datasheets
- MCP6471T-E/OT

1 Channels 10 mA per Channel 1pA 65 dB Instrumentational OP Amps 7.6, 20 V 2V~5.5V ±1V~2.75V MCP6471 5 Pins SC-74A, SOT-753
MCP6471T-E/OT Overview
There is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 5h termination of the year. In total, there are 5 pins on this op amp ic. This linear amplifier should be powered by an 3V battery. 5 pins are located on the operational amplifiers. The input offset voltage is -1.5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 100@2V to 5.5V uA . It is recommended to keep the voltage gain at 115dB at all times. This op amp contains 1 circuits. On the buffer amps, there are 1 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For this linear amplifier to work, the temperature should not be below -40 °C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125 °C. The total number of elements in this buffer amplifier is 1. The operating supply voltage of the buffer op amp is rated at 7.6, 20 V. This linear amplifier pack is based on the TAPE AND REEL axis. It is recommended that you use an 100µA power supply with this electrical part in order for it to operate correctly. Under 5.5 V is the minimum supply voltage for this electric component. Over 2 V is a recommended supply voltage for buffer ampsInstrumentation amplifiers are numbered by their -- series. This op amp ic is capable of conducting at least 56200 voltage gains. On the linear amplifier, there are 1 amplifiers. There are 5 terminals for wires on this op amp ic.
MCP6471T-E/OT Features
5 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
5Terminations
MCP6471T-E/OT Applications
There are a lot of Microchip Technology
MCP6471T-E/OT Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















