MCP6422-E/MS
- Mfr.Part #
- MCP6422-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 4
- In Stock :
- 4
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Mounting :
- Surface Mount
- Package :
- Tube
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Current - Supply :
- 4.4μA
- Minimum Operating Temperature :
- -40 °C
- Supply Voltage :
- 3V
- Seated Height-Max :
- 1.1 mm
- Product Category :
- Operational Amplifiers - Op Amps
- Manufacturer :
- Microchip
- Maximum Operating Temperature :
- +125 °C
- RoHS Status :
- ROHS3 Compliant
- Width :
- 3mm
- Single Supply Voltage (Max) :
- 5.5(V)
- Published :
- 2004
- Number of Channels :
- 2
- Operating Temperature :
- -40°C~125°C
- Mounting Style :
- SMD/SMT
- Rad Hardened :
- No
- Length :
- 3mm
- Terminal Pitch :
- 0.65mm
- Reach Compliance Code :
- Compliant
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- HTS Code :
- 8542.33.00.01
- Gain Bandwidth Product :
- 90kHz
- Input Offset Voltage (Vos) :
- 1mV
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Shut Down Feature :
- No
- Base Product Number :
- MCP6422
- ECCN Code :
- EAR99
- Number of Terminals :
- 8
- Average Bias Current-Max (IIB) :
- 0.00005μA
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Bandwidth :
- 90kHz
- Voltage - Input Offset :
- 1mV
- Package Shape :
- Square
- Unity Gain Bandwidth Product :
- 0.09
- Supply Voltage Limit-Max :
- 6.5V
- Amplifier Type :
- GENERAL PURPOSE
- Surface Mount :
- yes
- Number of Functions :
- 2
- Current - Input Bias :
- 1pA
- Operating Supply Voltage :
- 1.8 V to 5.5 V
- Mount :
- Surface Mount
- Product Type :
- Op Amps - Operational Amplifiers
- Base Part Number :
- MCP6422
- Dual Supply Voltage (Max) :
- Not Required(V)
- Slew Rate :
- 0.05V/µs
- Single Supply Voltage (Min) :
- 1.8(V)
- Operating Temp Range :
- -40C to 125C
- Rail to Rail :
- Rail to Rail Input/Output
- JESD-609 Code :
- e3
- Common Mode Rejection Ratio :
- 75 dB
- Package Type :
- MSOP
- Input Offset Voltage :
- 1(mV)
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Number of Channels per Chip :
- 2
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Series :
- --
- Brand :
- Microchip Technology / Atmel
- Operating Temperature Classification :
- Automotive
- Power Supply Type :
- Single
- Input Offset Voltage-Max :
- 1000 µV
- Temperature Grade :
- Automotive
- Number of Elements :
- 2
- Operating Supply Current :
- 4.4μA
- Voltage Gain :
- 115dB
- Height :
- 950μm
- Peak Reflow Temperature (Cel) :
- 260
- Pin Count :
- 8
- Product Status :
- Active
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Single Supply Voltage (Typ) :
- 3/5(V)
- Factory Lead Time :
- 7 Weeks
- Shutdown :
- No Shutdown
- Packaging :
- Tube
- Dual Supply Voltage (Min) :
- Not Required(V)
- JESD-30 Code :
- S-PDSO-G8
- Number of Pins :
- 8
- Terminal Position :
- Dual
- Terminal Form :
- Gull wing
- Number of Terminations :
- 8
- Current - Output / Channel :
- 22 mA
- RoHS :
- Details
- Output Type :
- Rail-to-Rail
- Number of Circuits :
- 2
- Screening Level :
- TS 16949
- Output Current per Channel :
- 22mA
- Dimensions :
- 3 x 3 x 0.95mm
- Unity Gain BW-Nom :
- 90 kHz
- Qualification :
- AEC-Q100
- Power Supply Rejection Ratio :
- 75(dB)
- MSL :
- MSL 1 - Unlimited
- Product :
- Operational Amplifiers
- Power Supply Requirement :
- Single
- Mounting Type :
- Surface Mount
- Supplier Device Package :
- 8-MSOP
- Radiation Hardening :
- No
- Voltage Gain in dB :
- 115(dB)
- Nominal Supply Current :
- 4.4mA
- REACH SVHC :
- No SVHC
- Datasheets
- MCP6422-E/MS

2 Channels 22mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00005μA 1.8 V to 5.5 V 1.8V~5.5V MCP6422 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6422-E/MS Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 1mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 4.4μA, this op amp ic can operate. 115dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 2 circuits. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 1.8 V to 5.5 V. As a result, it is recommended that a power supply of 4.4µA be used with this electronic part. As the name implies, -- refers to the series of the buffer op amp. The buffer op amp is equipped with 8 terminals for attaching wires to it.
MCP6422-E/MS Features
8 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6422-E/MS Applications
There are a lot of Microchip Technology
MCP6422-E/MS Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















