MCP6404T-H/SL
- Mfr.Part #
- MCP6404T-H/SL
- Manufacturer
- Microchip Technology
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SOIC
- Stock
- 251
- In Stock :
- 251
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Operating Supply Current :
- 45 uA
- Micropower :
- yes
- Supply Current-Max :
- 0.28 mA
- Mounting Type :
- Surface Mount
- Product :
- Operational Amplifiers
- Supply Type :
- Single
- Output Type :
- Rail-to-Rail
- Low-Bias :
- yes
- Number of Elements :
- 4
- Factory Lead Time :
- 19 Weeks
- Input Offset Voltage (Vos) :
- 4.5mV
- Common Mode Rejection Ratio :
- 56 dB
- Number of Channels per Chip :
- 4
- Mount :
- Surface Mount
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Qualification Status :
- Not Qualified
- Terminal Form :
- Gull wing
- Radiation Hardening :
- No
- Output Current :
- 15mA
- Input Offset Voltage-Max :
- 4500 µV
- Package :
- Tape and Reel (TR)
- RoHS :
- Compliant
- Current - Supply :
- 45µA
- Peak Reflow Temperature (Cel) :
- 260
- Series :
- --
- Output Current per Channel :
- 15 mA
- Voltage - Input Offset :
- 800μV
- Supply Voltage Limit-Max :
- 7V
- Min Supply Voltage :
- 1.8 V
- Number of Circuits :
- 4
- Screening Level :
- Extended
- Voltage Gain-Min :
- 17780
- JESD-30 Code :
- R-PDSO-G14
- Seated Height-Max :
- 1.75 mm
- Qualification :
- AEC-Q100
- Operating Temperature :
- -40°C~150°C
- Bias Current-Max (IIB) @25C :
- 0.0001μA
- Unity Gain BW-Nom :
- 1000 kHz
- Maximum Operating Supply Voltage :
- 6 V
- Power Supplies :
- 2/5V
- Number of Terminals :
- 14
- Published :
- 2011
- Number of Functions :
- 4
- Number of Pins :
- 14
- HTS Code :
- 8542.39.00.01
- Type :
- General Purpose Amplifier
- Product Type :
- Op Amps - Operational Amplifiers
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Mounting Style :
- SMD/SMT
- Gain Bandwidth Product :
- 1MHz
- Package Shape :
- RECTANGULAR
- RoHS Status :
- ROHS3 Compliant
- Max Supply Voltage :
- 6 V
- Supply Voltage :
- 1.8V
- Product Status :
- Active
- Power Supply Rejection Ratio (PSRR) :
- 63dB
- Packing Method :
- Tape and Reel
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Input Bias Current :
- 100 pA
- Minimum Operating Temperature :
- - 40 C
- JESD-609 Code :
- e3
- Maximum Operating Temperature :
- + 125 C
- Terminal Pitch :
- 1.27mm
- Product Category :
- Operational Amplifiers - Op Amps
- Brand :
- Microchip Technology
- Min Operating Temperature :
- -40 °C
- Surface Mount :
- yes
- Number of Terminations :
- 14
- Height Seated (Max) :
- 1.75mm
- Max Operating Temperature :
- 150 °C
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Frequency Compensation :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Temperature Grade :
- Automotive
- Base Product Number :
- MCP6404
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Current - Input Bias :
- 1pA
- Supplier Package :
- SOIC N
- Number of Channels :
- 4
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Pin Count :
- 14
- Terminal Position :
- Dual
- Operating Supply Voltage :
- 3, 20 V
- Slew Rate :
- 0.5V/μs
- Supplier Device Package :
- 14-SOIC
- Architecture :
- VOLTAGE-FEEDBACK
- Low-Offset :
- No
- Width :
- 3.9 mm
- Current - Output / Channel :
- 15 mA
- Reach Compliance Code :
- Compliant
- Packaging :
- Tape and Reel (TR)
- Shutdown :
- No Shutdown
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Nominal Supply Current :
- 45µA
- ECCN Code :
- EAR99
- Mounting :
- Surface Mount
- Manufacturer :
- Microchip
- Voltage Gain :
- 110dB
- Length :
- 8.65mm
- Base Part Number :
- MCP6404
- Datasheets
- MCP6404T-H/SL

4 Channels 15 mA per Channel 1pA 56 dB Instrumentational OP Amps 0.0001μA 3, 20 V 1.8V~6V MCP6404 14 Pins 14-SOIC (0.154, 3.90mm Width)
MCP6404T-H/SL Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 4.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~150°C as far as operating temperature is concerned. Using a supply current of 45 uA , this buffer op amp will be able to operate. Keeping the voltage gain at 110dB is the best course of action. The buffer amp consists of 4 circuits in total. 4 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 150 °C degrees. A total of 4 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3, 20 V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. A supply of 45µA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 6 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 1.8 V, it is recommended to keep it higher. The -- stands for the buffer op amp's serial number. There are a maximum of 17780 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. The buffer op amp has 14 terminals that can be used for connecting wires to the amplifier.
MCP6404T-H/SL Features
14 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
14Terminations
MCP6404T-H/SL Applications
There are a lot of Microchip Technology
MCP6404T-H/SL Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















