MCP6402T-H/SN
- Mfr.Part #
- MCP6402T-H/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 3,312
- In Stock :
- 3,312
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Brand :
- Microchip Technology / Atmel
- Input Offset Voltage (Vos) :
- 4.5mV
- Supply Type :
- Single
- Qualification Status :
- Not Qualified
- Current - Input Bias :
- 1pA
- Low-Bias :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Number of Terminals :
- 8
- Supply Voltage Limit-Max :
- 7V
- Number of Channels :
- 2
- Series :
- --
- Bias Current-Max (IIB) @25C :
- 0.0001μA
- Micropower :
- yes
- Terminal Pitch :
- 1.27 mm
- Number of Pins :
- 8
- Height Seated (Max) :
- 1.75mm
- Pin Count :
- 8
- Package Shape :
- RECTANGULAR
- Surface Mount :
- yes
- Output Current :
- 15mA
- Operating Supply Voltage :
- 8, 35 V
- Common Mode Rejection Ratio :
- 56 dB
- Manufacturer :
- Microchip
- Frequency Compensation :
- yes
- Number of Channels per Chip :
- 2
- Reach Compliance Code :
- Compliant
- Peak Reflow Temperature (Cel) :
- 260
- Architecture :
- VOLTAGE-FEEDBACK
- Minimum Operating Temperature :
- - 40 C
- Power Supplies :
- 2/5 V
- Base Part Number :
- MCP6402
- Input Bias Current :
- 100 pA
- Terminal Form :
- Gull wing
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Min Operating Temperature :
- -40 °C
- RoHS Status :
- ROHS3 Compliant
- Mounting Type :
- Surface Mount
- JESD-609 Code :
- e3
- Width :
- 3.9 mm
- Number of Functions :
- 2
- Screening Level :
- Extended
- Product Type :
- Op Amps - Operational Amplifiers
- Gain Bandwidth Product :
- 1MHz
- Factory Lead Time :
- 2 Weeks
- Voltage Gain :
- 110dB
- Packaging :
- Tape and Reel (TR)
- HTS Code :
- 8542.39.00.01
- Maximum Operating Supply Voltage :
- 6 V
- Number of Terminations :
- 8
- ECCN Code :
- EAR99
- Terminal Position :
- Dual
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Nominal Supply Current :
- 45µA
- Supply Current-Max :
- 0.18 mA
- Voltage - Input Offset :
- 800μV
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Maximum Operating Temperature :
- + 125 C
- Shutdown :
- No Shutdown
- Radiation Hardening :
- No
- Supplier Package :
- SOIC N
- JESD-30 Code :
- R-PDSO-G8
- Seated Height-Max :
- 1.75 mm
- Mounting Style :
- SMD/SMT
- Product :
- Operational Amplifiers
- Operating Supply Current :
- 45 uA
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Number of Elements :
- 2
- Base Product Number :
- MCP6402
- Type :
- General Purpose Amplifier
- Packing Method :
- Tape and Reel
- Supplier Device Package :
- 8-SOIC
- Qualification :
- AEC-Q100
- Low-Offset :
- No
- Max Operating Temperature :
- 150 °C
- Published :
- 2011
- Current - Output / Channel :
- 15 mA
- RoHS :
- Compliant
- Unity Gain BW-Nom :
- 1000 kHz
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Supply Voltage :
- 1.8V
- Mount :
- Surface Mount
- Temperature Grade :
- Automotive
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Input Offset Voltage-Max :
- 4500 µV
- Min Supply Voltage :
- 1.8 V
- Product Category :
- Operational Amplifiers - Op Amps
- Output Current per Channel :
- 15 mA
- Voltage Gain-Min :
- 17780
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Number of Circuits :
- 2
- Max Supply Voltage :
- 6 V
- Operating Temperature :
- -40°C~150°C
- Power Supply Rejection Ratio (PSRR) :
- 63dB
- Length :
- 4.9mm
- Current - Supply :
- 45µA
- Product Status :
- Active
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Slew Rate :
- 0.5V/μs
- Output Type :
- Rail-to-Rail
- Mounting :
- Surface Mount
- Datasheets
- MCP6402T-H/SN

2 Channels 15 mA per Channel 1pA 56 dB Instrumentational OP Amps 0.0001μA 8, 35 V 1.8V~6V MCP6402 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6402T-H/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 1.8V battery. The op amp ic has an array of 8 pins on it. Op amp rates 4.5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~150°C , which is a good operating temperature. Using an 45 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 150 °C should not be used for the operation of buffer amplifier. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8, 35 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 45µA current rating. This electric component can work from a voltage of under 6 V as far as supply voltage is concerned. A voltage of 1.8 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 17780. 8 wire terminals are provided on this op amp.
MCP6402T-H/SN Features
8 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6402T-H/SN Applications
There are a lot of Microchip Technology
MCP6402T-H/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















