MCP6401T-E/OT
- Mfr.Part #
- MCP6401T-E/OT
- Manufacturer
- Microchip Technology
- Package / Case
- SC-74A, SOT-753
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT SOT23-5
- Stock
- 8,006
- In Stock :
- 8,006
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Average Bias Current-Max (IIB) :
- 0.0001 µA
- Common Mode Rejection Ratio :
- 56 dB
- Product Status :
- Active
- JESD-609 Code :
- e3
- Brand :
- Microchip Technology / Atmel
- Length :
- 3.0988mm
- Wideband :
- No
- Reach Compliance Code :
- Compliant
- Voltage Gain :
- 110dB
- Screening Level :
- Extended
- Voltage Gain-Min :
- 31620
- Supplier Device Package :
- SOT-23-5
- Voltage Gain in dB :
- 110(dB)
- Number of Pins :
- 5
- Operating Supply Current :
- 45 uA
- MSL :
- MSL 1 - Unlimited
- Current - Supply :
- 45µA
- Power Supplies :
- 2/5 V
- Ambient Temperature Range High :
- 125 °C
- Supply Voltage :
- 1.8V
- Peak Reflow Temperature (Cel) :
- 260
- Height :
- 1.2954mm
- Input Offset Voltage (Vos) :
- 4.5mV
- Qualification :
- AEC-Q100
- Single Supply Voltage (Max) :
- 6(V)
- Package / Case :
- SC-74A, SOT-753
- Power Supply Type :
- Single
- HTS Code :
- 8542.33.00.01
- Max Junction Temperature (Tj) :
- 155 °C
- Nominal Supply Current :
- 45µA
- Unity Gain BW-Nom :
- 1000 kHz
- Terminal Position :
- Dual
- Product Type :
- Op Amps - Operational Amplifiers
- Qualification Status :
- Not Qualified
- REACH SVHC :
- No SVHC
- Operating Temperature Classification :
- Automotive
- Input Offset Voltage :
- 4.5@6V(mV)
- ECCN Code :
- EAR99
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Micropower :
- yes
- Package Type :
- SOT-23
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Pbfree Code :
- yes
- Slew Rate :
- 0.5V/μs
- Rail to Rail :
- Rail to Rail Input/Output
- Power Supply Requirement :
- Single
- Dual Supply Voltage (Min) :
- Not Required(V)
- Mount :
- Surface Mount
- Base Part Number :
- MCP6401
- Type :
- General Purpose Amplifier
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Pin Count :
- 5
- Number of Functions :
- 1
- Current - Input Bias :
- 1pA
- Packaging :
- Tape and Reel (TR)
- RoHS :
- Compliant
- Voltage - Input Offset :
- 4.5mV
- Surface Mount :
- yes
- Product Category :
- Operational Amplifiers - Op Amps
- Max Supply Voltage :
- 6 V
- RoHS Status :
- ROHS3 Compliant
- Output Type :
- Rail-to-Rail
- Product :
- Operational Amplifiers
- Input Offset Voltage-Max :
- 4500 µV
- Architecture :
- VOLTAGE-FEEDBACK
- Max Operating Temperature :
- 125 °C
- Low-Bias :
- yes
- Input Bias Current :
- 0.1(nA)
- Min Operating Temperature :
- -40 °C
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Amplifier Type :
- GENERAL PURPOSE
- Lead Free :
- Lead Free
- Contact Plating :
- Tin
- Seated Height-Max :
- 1.45 mm
- Base Product Number :
- MCP6401
- Mounting :
- Surface Mount
- Number of Amplifiers :
- 1
- Supply Type :
- Single
- Temperature Grade :
- Automotive
- Dual Supply Voltage (Max) :
- Not Required(V)
- Width :
- 1.8034mm
- Operating Temp Range :
- -40C to 125C
- Output Current per Channel :
- 15 mA
- Operating Temperature :
- -40°C~125°C
- Minimum Operating Temperature :
- -40 °C
- Common-mode Reject Ratio-Min :
- 56 dB
- Gain Bandwidth Product :
- 1MHz
- Bandwidth :
- 1 MHz
- Number of Elements :
- 1
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Min Supply Voltage :
- 1.8 V
- Shut Down Feature :
- No
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Supplier Package :
- SOT-23
- Terminal Form :
- Gull wing
- Operating Supply Voltage :
- 5.25, 2.7 V
- Published :
- 2010
- Power Supply Rejection Ratio :
- 63(dB)
- Low-Offset :
- No
- Frequency Compensation :
- yes
- Mounting Type :
- Surface Mount
- Series :
- --
- Manufacturer :
- Microchip
- Number of Channels :
- 1
- Unity Gain Bandwidth Product :
- 1
- Radiation Hardening :
- No
- Package Shape :
- RECTANGULAR
- Supply Voltage Limit-Max :
- 7V
- Mounting Style :
- SMD/SMT
- Factory Lead Time :
- 2 Weeks
- Maximum Operating Supply Voltage :
- 6 V
- Terminal Pitch :
- 0.95 mm
- JESD-30 Code :
- R-PDSO-G5
- Power :
- No
- Number of Terminations :
- 5
- Number of Channels per Chip :
- 1
- Number of Circuits :
- 1
- Packing Method :
- Tape and Reel
- Output Current :
- 15mA
- Programmable Power :
- No
- Single Supply Voltage (Min) :
- 1.8(V)
- Single Supply Voltage (Typ) :
- 3/5(V)
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Bias Current-Max (IIB) @25C :
- 0.0001 µA
- Power Supply Rejection Ratio (PSRR) :
- 63dB
- Dimensions :
- 3.1 x 1.8 x 1.3mm
- Maximum Input Offset Current :
- 0.000001(TYP)@6V
- Rad Hardened :
- No
- Maximum Operating Temperature :
- +125 °C
- Shutdown :
- No Shutdown
- Supply Current-Max :
- 0.07 mA
- Voltage Gain dB :
- 110 dB
- Schedule B :
- 8542330000, 8542330000/8542330000/8542330000/8542330000/8542330000
- Number of Terminals :
- 5
- Datasheets
- MCP6401T-E/OT

1 Channels 15 mA per Channel 1pA 56 dB Instrumentational OP Amps 0.0001 µA 5.25, 2.7 V 1.8V~6V MCP6401 5 Pins SC-74A, SOT-753
MCP6401T-E/OT Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 5 terminations have been reported in the past few weeks. Buffer amplifier has a total of 5 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. An 5-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 4.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 45 uA , this buffer op amp will be able to operate. Keeping the voltage gain at 110dB is the best course of action. The buffer amp consists of 1 circuits in total. 1 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 125 °C degrees. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.25, 2.7 V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. A supply of 45μA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 6 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 1.8 V, it is recommended to keep it higher. The -- stands for the buffer op amp's serial number. There are a maximum of 31620 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. As you can see, the linear amplifier has 1 amplifiers. The buffer op amp has 5 terminals that can be used for connecting wires to the amplifier.
MCP6401T-E/OT Features
5 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
5Terminations
MCP6401T-E/OT Applications
There are a lot of Microchip Technology
MCP6401T-E/OT Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















