MCP631-E/SN
- Mfr.Part #
- MCP631-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 745
- In Stock :
- 745
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Terminal Form :
- Gull wing
- Average Bias Current-Max (IIB) :
- 0.005μA
- Rad Hardened :
- No
- Rail/Rail I/O Type :
- Rail to Rail Output
- Mounting Type :
- Surface Mount
- Voltage Gain :
- 124dB
- Mounting :
- Surface Mount
- Number of Pins :
- 8
- Operating Temp Range :
- -40C to 125C
- Brand :
- Microchip Technology
- Pin Count :
- 8
- Single Supply Voltage (Max) :
- 5.5(V)
- Product Category :
- Operational Amplifiers - Op Amps
- Factory Lead Time :
- 9 Weeks
- ECCN Code :
- EAR99
- Voltage - Input Offset :
- 1.8mV
- Number of Channels :
- 1
- Maximum Operating Temperature :
- + 125 C
- Current - Supply :
- 2.5mA
- REACH SVHC :
- No SVHC
- Operating Supply Current :
- 2.5 mA
- Product Status :
- Active
- Length :
- 4.8768mm
- Voltage Gain in dB :
- 124(dB)
- Unity Gain Bandwidth Product :
- 24
- Unity Gain BW-Nom :
- 24000 kHz
- Nominal Supply Current :
- 2.5mA
- Gain :
- 124 dB
- Radiation Hardening :
- No
- Slew Rate :
- 10V/μs
- Operating Temperature Classification :
- Automotive
- Package Type :
- SOIC N
- Number of Circuits :
- 1
- Number of Channels per Chip :
- 1
- Number of Functions :
- 1
- Operating Temperature :
- -40°C~125°C
- Single Supply Voltage (Typ) :
- 3/5(V)
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Architecture :
- VOLTAGE-FEEDBACK
- Micropower :
- No
- Frequency Compensation :
- yes
- Width :
- 3.9116mm
- Pbfree Code :
- yes
- Power Supply Rejection Ratio :
- 61(dB)
- Single Supply Voltage (Min) :
- 2.5(V)
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Package :
- Tube
- Supply Voltage :
- 2.5V
- Input Offset Voltage (Vos) :
- 8mV
- Programmable Power :
- No
- RoHS :
- Details
- Dual Supply Voltage (Max) :
- Not Required(V)
- Shut Down Feature :
- No
- Mount :
- Surface Mount
- Series :
- --
- Current - Input Bias :
- 4pA
- Type :
- General Purpose Amplifier
- RoHS Status :
- ROHS3 Compliant
- Supply Voltage Limit-Max :
- 6.5V
- Input Bias Current :
- 0.004(nA)
- JESD-609 Code :
- e3
- Number of Elements :
- 1
- Shutdown :
- No Shutdown
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Voltage Gain dB :
- 124 dB
- Number of Terminations :
- 8
- Low-Offset :
- No
- Dual Supply Voltage (Min) :
- Not Required(V)
- Bandwidth :
- 24MHz
- Product Type :
- Op Amps - Operational Amplifiers
- Power Supply Requirement :
- Single
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Qualification :
- AEC-Q100
- Height :
- 1.2446mm
- Packaging :
- Tube
- Mounting Style :
- SMD/SMT
- Peak Reflow Temperature (Cel) :
- 260
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Supplier Package :
- SOIC N
- Supply Type :
- Single
- Product :
- Operational Amplifiers
- Base Product Number :
- MCP631
- Common Mode Rejection Ratio :
- 63 dB
- Supplier Device Package :
- 8-SOIC
- Terminal Position :
- Dual
- Lead Free :
- Lead Free
- Low-Bias :
- yes
- Output Type :
- Rail-to-Rail
- Input Offset Voltage :
- (mV)
- Base Part Number :
- MCP631
- Gain Bandwidth Product :
- 24MHz
- Published :
- 2000
- Screening Level :
- Extended
- Output Current per Channel :
- 70 mA
- Output Current :
- 70mA
- Manufacturer :
- Microchip
- Power Supplies :
- 3/5V
- Operating Supply Voltage :
- 5.5 V
- Minimum Operating Temperature :
- - 40 C
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Amplifier Type :
- GENERAL PURPOSE
- Datasheets
- MCP631-E/SN

1 Channels 70 mA per Channel 4pA 63 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V MCP631 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP631-E/SN Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 8mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 2.5 mA, this op amp ic can operate. 124dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 5.5 V. As a result, it is recommended that a power supply of 2.5mA be used with this electronic part. As the name implies, -- refers to the series of the buffer op amp.
MCP631-E/SN Features
8 Pins
supply voltage of 2.5V
124dB voltage gain
Output Type: Rail-to-Rail
MCP631-E/SN Applications
There are a lot of Microchip Technology
MCP631-E/SN Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















