MCP6295-E/P
- Mfr.Part #
- MCP6295-E/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8DIP
- Stock
- 45,906
- In Stock :
- 45,906
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Series :
- --
- Supply Voltage :
- 5V
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Low-Offset :
- No
- Number of Pins :
- 8
- JESD-609 Code :
- e3
- Shutdown :
- No Shutdown
- Width :
- 6.35mm
- Product :
- Operational Amplifiers
- Terminal Pitch :
- 2.54 mm
- Product Type :
- Op Amps - Operational Amplifiers
- Power :
- No
- Bandwidth :
- 10 MHz
- Max Operating Temperature :
- 125 °C
- Height :
- 3.3mm
- Manufacturer :
- Microchip
- Input Bias Current :
- 1 pA
- Current - Supply :
- 1mA
- Supplier Package :
- PDIP
- Mount :
- Through Hole
- Number of Elements :
- 2
- HTS Code :
- 8542.33.00.01
- Amplifier Type :
- GENERAL PURPOSE
- Power Supplies :
- 2.5/5 V
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Voltage Gain-Min :
- 31620
- Factory Lead Time :
- 7 Weeks
- Output Type :
- Rail-to-Rail
- Product Status :
- Active
- Output Current per Channel :
- 25mA
- Mounting :
- Through Hole
- Operating Supply Current :
- 1mA
- Surface Mount :
- No
- Operating Temperature :
- -40°C~125°C
- Pbfree Code :
- yes
- ECCN Code :
- EAR99
- Length :
- 9.27mm
- Terminal Form :
- THROUGH-HOLE
- Min Supply Voltage :
- 2.4 V
- Slew Rate :
- 7V/µs
- Peak Reflow Temperature (Cel) :
- Not Applicable
- Shut Down Support :
- No
- Operating Supply Voltage :
- 5.5 V
- Qualification :
- AEC-Q100
- Min Operating Temperature :
- -40 °C
- RoHS :
- Details
- Terminal Finish :
- Matte Tin (Sn)
- Micropower :
- No
- Supply Type :
- Single
- Quiescent Current :
- 1mA
- Voltage - Input Offset :
- 3mV
- Voltage - Supply, Single/Dual (±) :
- 2.4V~6V
- Reach Compliance Code :
- Compliant
- Number of Channels :
- 2 Channel
- RoHS Status :
- ROHS3 Compliant
- Qualification Status :
- Not Qualified
- Base Product Number :
- MCP6295
- Pin Count :
- 8
- Published :
- 2005
- Type :
- General Purpose Amplifier
- Number of Functions :
- 2
- Radiation Hardening :
- No
- Mounting Style :
- Through Hole
- Input Offset Voltage-Max :
- 5000 µV
- Power Supply Type :
- Single
- Mounting Type :
- Through Hole
- Programmable Power :
- No
- Screening Level :
- Extended Industrial
- Output Current :
- 25mA
- Average Bias Current-Max (IIB) :
- 0.005μA
- Maximum Operating Temperature :
- + 125 C
- JESD-30 Code :
- R-PDIP-T8
- Unity Gain BW-Nom :
- 10000 kHz
- Voltage Gain :
- 110dB
- Gain Bandwidth Product :
- 10MHz
- Base Part Number :
- MCP6295
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Packaging :
- Tube
- Package :
- Tube
- Moisture Sensitivity Level (MSL) :
- Not Applicable
- Temperature Grade :
- Automotive
- Frequency Compensation :
- yes
- Product Category :
- Operational Amplifiers - Op Amps
- Supply Current-Max :
- 2.6 mA
- Package Shape :
- RECTANGULAR
- Lead Free :
- Lead Free
- Supplier Device Package :
- 8-PDIP
- Minimum Operating Temperature :
- - 40 C
- Max Supply Voltage :
- 5.5 V
- Low-Bias :
- yes
- Current - Input Bias :
- 1pA
- Nominal Supply Current :
- 1mA
- Wideband :
- No
- Architecture :
- VOLTAGE-FEEDBACK
- Terminal Position :
- Dual
- Common Mode Rejection Ratio :
- 70 dB
- Seated Height-Max :
- 4.32 mm
- Number of Channels per Chip :
- 2
- Voltage Gain dB :
- 110 dB
- Number of Terminations :
- 8
- Supply Voltage Limit-Max :
- 7V
- Input Offset Voltage (Vos) :
- 3mV
- Current - Output / Channel :
- 25mA
- Brand :
- Microchip Technology
- Number of Circuits :
- 2
- Number of Terminals :
- 8
- Datasheets
- MCP6295-E/P

2 Channel Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.4V~6V MCP6295 8 Pins 8-DIP (0.300, 7.62mm)
MCP6295-E/P Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. For this electronic part, it is recommended that you mount it with type Through Hole. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 1mA . 110dB should be the voltage gain. A linear amplifier like this has 2 circuits on it. Op amp ic has 2 Channel channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. In order for this buffer op amp to function, it should have a temperature of at least -40 °C degrees Celsius. At temperatures greater than 125 °C, Instrumentation amplifier should not be used. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. We recommend that you use this electronic part with an 1mA supply in order to get the best performance from it. The electrical part is capable of being powered by a voltage of under 5.5 V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.4 V. The -- represents the op amp's series number. There is an 1mA quiescent current running through op amp ic. This operational amplifier can conduct a voltage gain of up to 31620 at a minimum. A total of 8 terminals are available on this buffer op amp for the connection of wires.
MCP6295-E/P Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6295-E/P Applications
There are a lot of Microchip Technology
MCP6295-E/P Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















