MCP6293T-E/CH
- Mfr.Part #
- MCP6293T-E/CH
- Manufacturer
- Microchip Technology
- Package / Case
- SOT-23-6
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT SOT23-6
- Stock
- 5,074
- In Stock :
- 5,074
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Channels :
- 1
- Number of Functions :
- 1
- Lead Free :
- Lead Free
- JESD-30 Code :
- R-PDSO-G6
- Supplier Package :
- SOT-23A
- Low-Offset :
- No
- Reach Compliance Code :
- Compliant
- Input Offset Voltage-Max :
- 5000 µV
- Supplier Device Package :
- SOT-23-6
- Qualification :
- AEC-Q100
- Type :
- General Purpose Amplifier
- Seated Height-Max :
- 1.45 mm
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Product :
- Operational Amplifiers
- ECCN Code :
- EAR99
- Supply Voltage Limit-Max :
- 7V
- Power :
- No
- Number of Terminals :
- 6
- Terminal Pitch :
- 0.95mm
- Operating Supply Voltage :
- 5.5 V
- Mounting :
- Surface Mount
- Maximum Operating Supply Voltage :
- 5.5 V
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Average Bias Current-Max (IIB) :
- 0.005μA
- Input Bias Current :
- 1 pA
- Factory Lead Time :
- 13 Weeks
- Output Type :
- Rail-to-Rail
- Amplifier Type :
- GENERAL PURPOSE
- Height :
- 1.3mm
- Min Operating Temperature :
- -40 °C
- Min Supply Voltage :
- 2.4 V
- Input Offset Voltage (Vos) :
- 3mV
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Terminations :
- 6
- Supply Type :
- Single
- Output Current :
- 25mA
- Max Supply Voltage :
- 5.5 V
- Low-Bias :
- yes
- Pin Count :
- 6
- Programmable Power :
- No
- Number of Amplifiers :
- 1
- Voltage Gain dB :
- 110 dB
- Number of Pins :
- 6
- RoHS Status :
- ROHS3 Compliant
- Voltage - Supply, Single/Dual (±) :
- 2.4V~6V
- Nominal Supply Current :
- 1mA
- Pbfree Code :
- yes
- Max Operating Temperature :
- 125 °C
- Temperature Grade :
- Automotive
- Base Part Number :
- MCP6293
- Output Current per Channel :
- 25mA
- Published :
- 2007
- Common Mode Rejection Ratio :
- 70 dB
- Package / Case :
- SOT-23-6
- Power Supplies :
- 2.5/5V
- Screening Level :
- Extended Industrial
- Slew Rate :
- 7V/µs
- Wideband :
- No
- Surface Mount :
- yes
- Supply Current-Max :
- 1.3 mA
- Series :
- --
- Product Status :
- Active
- Voltage Gain-Min :
- 31620
- Voltage - Input Offset :
- 3mV
- Architecture :
- VOLTAGE-FEEDBACK
- Minimum Operating Temperature :
- - 40 C
- Packing Method :
- Tape and Reel
- Unity Gain BW-Nom :
- 10000 kHz
- Mounting Type :
- Surface Mount
- Current - Output / Channel :
- 25mA
- HTS Code :
- 8542.33.00.01
- Current - Input Bias :
- 1pA
- Peak Reflow Temperature (Cel) :
- 260
- Frequency Compensation :
- yes
- Voltage Gain :
- 110dB
- JESD-609 Code :
- e3
- Package Shape :
- RECTANGULAR
- Brand :
- Microchip Technology / Atmel
- RoHS :
- Details
- Terminal Position :
- Dual
- Terminal Form :
- Gull wing
- Number of Channels per Chip :
- 1
- REACH SVHC :
- No SVHC
- Mount :
- Surface Mount
- Terminal Finish :
- Matte Tin (Sn)
- Manufacturer :
- Microchip
- Operating Temperature :
- -40°C~125°C
- Shutdown :
- No Shutdown
- Product Category :
- Operational Amplifiers - Op Amps
- Schedule B :
- 8542330000, 8542330000/8542330000/8542330000/8542330000/8542330000
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Width :
- 1.8mm
- Current - Supply :
- 1mA
- Product Type :
- Op Amps - Operational Amplifiers
- Bandwidth :
- 10 MHz
- Operating Supply Current :
- 1mA
- Supply Voltage :
- 5V
- Radiation Hardening :
- No
- Length :
- 3.1mm
- Number of Elements :
- 1
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Base Product Number :
- MCP6293
- Maximum Operating Temperature :
- + 125 C
- Packaging :
- Cut Tape (CT)
- Mounting Style :
- SMD/SMT
- Qualification Status :
- Not Qualified
- Micropower :
- No
- Input Type :
- Rail-to-Rail
- Gain Bandwidth Product :
- 10MHz
- Number of Circuits :
- 1
- Datasheets
- MCP6293T-E/CH

1 Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.4V~6V MCP6293 6 Pins SOT-23-6
MCP6293T-E/CH Overview
It is packaged in an SOT-23-6-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. It is estimated that there will be at least 6 terminations this year. A total of 6 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 6 pins. Op amp ic rates 3mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 1mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 110dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125 °C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. For optimal performance, this electrical part should be connected to a supply with a current of 1mA. It is important to keep in mind that the power supply voltage of this electric component is below 5.5 V, which is suitable. Keeping the linear amplifier's supply voltage above 2.4 V is recommended. Buffer op amp series numbers are indicated by the --. This op amp ic can conduct a minimum voltage gain of 31620. The linear amplifier has 1 amplifiers. There are 6 wire terminals on this op amp ic.
MCP6293T-E/CH Features
6 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
6Terminations
MCP6293T-E/CH Applications
There are a lot of Microchip Technology
MCP6293T-E/CH Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















