MCP6293-E/SN

Share

Or copy the link below:

Mfr.Part #
MCP6293-E/SN
Manufacturer
Microchip Technology
Package / Case
8-SOIC (0.154, 3.90mm Width)
Datasheet
Download
Description
IC OPAMP GP 1 CIRCUIT 8SOIC
Stock
6,992
In Stock :
6,992

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Microchip Technology
Product Category :
Instrumentation, OP Amps, Buffer Amps
Operating Supply Voltage :
5.5 V
Frequency Compensation :
yes
Wideband :
No
Min Supply Voltage :
2.4 V
Pbfree Code :
yes
Power Supply Rejection Ratio (PSRR) :
70dB
ECCN Code :
EAR99
Voltage Gain dB :
110 dB
Input Offset Voltage (Vos) :
3mV
Max Operating Temperature :
125 °C
Reach Compliance Code :
Compliant
Power Supply Type :
Single
Terminal Pitch :
1.27 mm
Product Status :
Active
Number of Channels :
1
Operating Temperature :
-40°C~125°C
Number of Channels per Chip :
1
Average Bias Current-Max (IIB) :
0.005μA
Nominal Supply Current :
1mA
Radiation Hardening :
No
Gain Bandwidth Product :
10MHz
Dimensions :
4.9 x 3.9 x 1.25mm
Min Operating Temperature :
-40 °C
Voltage Gain :
110dB
Number of Functions :
1
Supplier Package :
SOIC N
Pin Count :
8
Package Shape :
RECTANGULAR
Number of Elements :
1
Package :
Tube
Current - Supply :
1mA
Current - Output / Channel :
25mA
Qualification Status :
Not Qualified
Lead Free :
Lead Free
Manufacturer :
Microchip
Number of Amplifiers :
1
Shut Down Support :
No
Supply Voltage :
5V
Shutdown :
No Shutdown
Micropower :
No
Peak Reflow Temperature (Cel) :
260
Number of Terminations :
8
Surface Mount :
yes
Base Product Number :
MCP6293
Supply Voltage Limit-Max :
7V
Unity Gain BW-Nom :
10000 kHz
Programmable Power :
No
REACH SVHC :
No SVHC
RoHS Status :
ROHS3 Compliant
JESD-609 Code :
e3
Seated Height-Max :
1.75 mm
Number of Circuits :
1
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Power :
No
Type :
General Purpose Amplifier
Lifecycle Status :
Production (Last Updated: 2 years ago)
Voltage - Supply, Single/Dual (±) :
2.4V~6V
Product Type :
Op Amps - Operational Amplifiers
Architecture :
VOLTAGE-FEEDBACK
Height :
1.25mm
Max Supply Voltage :
5.5 V
Mounting Style :
SMD/SMT
Maximum Operating Supply Voltage :
5.5 V
Low-Bias :
yes
Terminal Form :
Gull wing
Supply Type :
Single
Product Category :
Operational Amplifiers - Op Amps
Base Part Number :
MCP6293
Output Current :
25mA
Bandwidth :
10 MHz
Packaging :
Tube
JESD-30 Code :
R-PDSO-G8
Number of Pins :
8
Package / Case :
8-SOIC (0.154, 3.90mm Width)
Supply Current-Max :
1.3 mA
Output Current per Channel :
25mA
Screening Level :
Extended Industrial
Input Bias Current :
1 pA
Amplifier Type :
GENERAL PURPOSE
Mounting Type :
Surface Mount
Package Type :
SOIC
Qualification :
AEC-Q100
Time@Peak Reflow Temperature-Max (s) :
40
Voltage - Input Offset :
3mV
Width :
3.9mm
Terminal Finish :
Matte Tin (Sn)
Mount :
Surface Mount
Mounting :
Surface Mount
Supplier Device Package :
8-SOIC
Maximum Operating Temperature :
+125 °C
Product :
Operational Amplifiers
Voltage Gain-Min :
31620
RoHS :
Details
Series :
--
Terminal Position :
Dual
Power Supplies :
2.5/5V
Published :
2016
Low-Offset :
No
HTS Code :
8542.33.00.01
Number of Terminals :
8
Minimum Operating Temperature :
-40 °C
Current - Input Bias :
1pA
Slew Rate :
7V/µs
Temperature Grade :
Automotive
Brand :
Microchip Technology
Input Offset Voltage-Max :
5000 µV
Rail to Rail :
Rail to Rail Input/Output
Length :
4.9mm
Operating Supply Current :
1mA
Common Mode Rejection Ratio :
70 dB
Factory Lead Time :
10 Weeks
Output Type :
Rail-to-Rail
Datasheets
MCP6293-E/SN
Introducing Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP6293-E/SN from Chip IC,where excellence meets affordability. This product stands out with its Number of Channels:1, Operating Temperature:-40°C~125°C, Number of Terminations:8, Type:General Purpose Amplifier, Base Part Number:MCP6293, Bandwidth:10 MHz, Number of Pins:8, Package / Case:8-SOIC (0.154, 3.90mm Width), Mounting Type:Surface Mount, MCP6293-E/SN pinout, MCP6293-E/SN datasheet PDF, MCP6293-E/SN amp .Beyond Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP6293-E/SN ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

Microchip Technology MCP6293-E/SN


1 Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.4V~6V MCP6293 8 Pins 8-SOIC (0.154, 3.90mm Width)

MCP6293-E/SN Overview


A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 1mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125 °C. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. As a recommendation, this electronic component should be used with a power supply that can deliver 1mA. I would like to point out that this electrical component is capable of working from a voltage below 5.5 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.4 V at all times. The -- indicates the series number of the op amp. There is a minimum voltage gain of 31620 that this buffer op amp is capable of conducting. In total, there are 1 op amps on the device. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.

MCP6293-E/SN Features


8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations


MCP6293-E/SN Applications


There are a lot of Microchip Technology
MCP6293-E/SN Instrumentational OP Amps applications.


  • Addition operation circuits
  • Subtraction operation circuits
  • single/dual op amp sum and difference circuits
  • Integrator circuits
  • Differentiator circuits
  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM