MCP6293-E/P
- Mfr.Part #
- MCP6293-E/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8DIP
- Stock
- 418
- In Stock :
- 418
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage - Supply, Single/Dual (±) :
- 2.4V~6V
- Packaging :
- Tube
- Base Product Number :
- MCP6293
- Product :
- Operational Amplifiers
- Brand :
- Microchip Technology
- Micropower :
- No
- Number of Channels :
- 1 Channel
- Output Current :
- 25mA
- Unity Gain BW-Nom :
- 10000 kHz
- Max Supply Voltage :
- 5.5 V
- JESD-30 Code :
- R-PDIP-T8
- Product Category :
- Operational Amplifiers - Op Amps
- Supply Voltage Limit-Max :
- 7V
- Slew Rate :
- 7V/µs
- Radiation Hardening :
- No
- Low-Bias :
- yes
- Power Supply Type :
- Single
- Temperature Grade :
- Automotive
- Number of Circuits :
- 1
- Series :
- --
- Supplier Package :
- PDIP
- Architecture :
- VOLTAGE-FEEDBACK
- Mounting Style :
- Through Hole
- Current - Input Bias :
- 1pA
- Terminal Finish :
- Matte Tin (Sn)
- Max Operating Temperature :
- 125 °C
- Output Type :
- Rail-to-Rail
- Moisture Sensitivity Level (MSL) :
- Not Applicable
- Surface Mount :
- No
- Operating Supply Current :
- 1 mA
- Gain Bandwidth Product :
- 10MHz
- Terminal Pitch :
- 2.54mm
- ECCN Code :
- EAR99
- Mount :
- Through Hole
- Low-Offset :
- No
- Mounting Type :
- Through Hole
- HTS Code :
- 8542.33.00.01
- Current - Supply :
- 1mA
- Operating Supply Voltage :
- 5.5 V
- Voltage Gain-Min :
- 31620
- Package :
- Tube
- Input Offset Voltage-Max :
- 5000 µV
- Voltage Gain dB :
- 110 dB
- Nominal Supply Current :
- 1mA
- Peak Reflow Temperature (Cel) :
- Not Applicable
- Wideband :
- No
- Number of Elements :
- 1
- Package Shape :
- RECTANGULAR
- Width :
- 6.35mm
- Min Supply Voltage :
- 2.4 V
- Minimum Operating Temperature :
- - 40 C
- Number of Functions :
- 1
- Product Status :
- Active
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Voltage Gain :
- 110dB
- Reach Compliance Code :
- Compliant
- Common Mode Rejection Ratio :
- 70 dB
- Length :
- 9.27mm
- Type :
- General Purpose Amplifier
- Seated Height-Max :
- 4.32 mm
- RoHS :
- Details
- Pin Count :
- 8
- Terminal Position :
- Dual
- Supplier Device Package :
- 8-PDIP
- Average Bias Current-Max (IIB) :
- 0.005μA
- Min Operating Temperature :
- -40 °C
- Voltage - Input Offset :
- 3mV
- Current - Output / Channel :
- 25mA
- Power :
- No
- Published :
- 2007
- Maximum Operating Supply Voltage :
- 5.5 V
- Maximum Operating Temperature :
- + 125 C
- Height :
- 3.3mm
- Product Type :
- Op Amps - Operational Amplifiers
- Qualification Status :
- Not Qualified
- Pbfree Code :
- yes
- Factory Lead Time :
- 10 Weeks
- Lead Free :
- Contains Lead
- Power Supplies :
- 2.5/5V
- Qualification :
- AEC-Q100
- JESD-609 Code :
- e3
- Operating Temperature :
- -40°C~125°C
- Mounting :
- Through Hole
- Frequency Compensation :
- yes
- Screening Level :
- Extended Industrial
- Base Part Number :
- MCP6293
- Manufacturer :
- Microchip
- RoHS Status :
- ROHS3 Compliant
- Input Bias Current :
- 1 pA
- Supply Current-Max :
- 1.3 mA
- Terminal Form :
- THROUGH-HOLE
- Input Offset Voltage (Vos) :
- 3mV
- Supply Voltage :
- 5V
- Shut Down Support :
- No
- Output Current per Channel :
- 25 mA
- Supply Type :
- Single
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Amplifier Type :
- GENERAL PURPOSE
- Programmable Power :
- No
- Number of Terminals :
- 8
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Number of Terminations :
- 8
- Number of Pins :
- 8
- Number of Channels per Chip :
- 1
- Shutdown :
- No Shutdown
- Datasheets
- MCP6293-E/P

1 Channel Channels 25 mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.4V~6V MCP6293 8 Pins 8-DIP (0.300, 7.62mm)
MCP6293-E/P Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 3mV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 1 mA . It is recommended to keep the voltage gain at 110dB at all times. This op amp contains 1 circuits. On the buffer amps, there are 1 Channel channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For this linear amplifier to work, the temperature should not be below -40 °C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125 °C. The total number of elements in this buffer amplifier is 1. The operating supply voltage of the buffer op amp is rated at 5.5 V. It is recommended that you use an 1mA power supply with this electrical part in order for it to operate correctly. Under 5.5 V is the minimum supply voltage for this electric component. Over 2.4 V is a recommended supply voltage for buffer ampsInstrumentation amplifiers are numbered by their -- series. This op amp ic is capable of conducting at least 31620 voltage gains. There are 8 terminals for wires on this op amp ic.
MCP6293-E/P Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6293-E/P Applications
There are a lot of Microchip Technology
MCP6293-E/P Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















