MCP6292-E/MS
- Mfr.Part #
- MCP6292-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 1,995
- In Stock :
- 1,995
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Programmable Power :
- No
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Operating Temp Range :
- -40C to 125C
- Maximum Operating Temperature :
- +125 °C
- Reach Compliance Code :
- Compliant
- Output Current per Channel :
- 25mA
- Product Status :
- Active
- Radiation Hardening :
- No
- ECCN Code :
- EAR99
- Base Product Number :
- MCP6292
- Power Supply Type :
- Single
- Package Shape :
- Square
- Single Supply Voltage (Min) :
- 2.4(V)
- Slew Rate :
- 7V/µs
- Shut Down Feature :
- No
- Terminal Position :
- Dual
- Terminal Finish :
- Matte Tin (Sn)
- Low-Bias :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Number of Terminations :
- 8
- Maximum Operating Supply Voltage :
- 5.5 V
- Single Supply Voltage (Typ) :
- 3/5(V)
- Architecture :
- VOLTAGE-FEEDBACK
- Qualification :
- AEC-Q100
- Bandwidth :
- 10MHz
- Gain Bandwidth Product :
- 10MHz
- Product Category :
- Operational Amplifiers - Op Amps
- REACH SVHC :
- No SVHC
- RoHS Status :
- ROHS3 Compliant
- Power Supply Rejection Ratio :
- 70(dB)
- Surface Mount :
- yes
- Qualification Status :
- Not Qualified
- Voltage Gain :
- 110dB
- Peak Reflow Temperature (Cel) :
- 260
- Unity Gain BW-Nom :
- 10000 kHz
- Number of Terminals :
- 8
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Min Operating Temperature :
- -40 °C
- Number of Circuits :
- 2
- Supply Type :
- Single
- Dimensions :
- 3 x 3 x 0.85mm
- MSL :
- MSL 1 - Unlimited
- Number of Pins :
- 8
- Factory Lead Time :
- 2 Weeks
- Mounting Type :
- Surface Mount
- Power :
- No
- Voltage Gain-Min :
- 31620
- Operating Supply Current :
- 1mA
- Power Supplies :
- 2.5/5 V
- Base Part Number :
- MCP6292
- Lead Free :
- Lead Free
- Packaging :
- Tube
- Temperature Grade :
- Automotive
- Operating Temperature :
- -40°C~125°C
- Mount :
- Surface Mount
- Operating Temperature Classification :
- Automotive
- Low-Offset :
- No
- Width :
- 3mm
- Input Offset Voltage-Max :
- 5000 µV
- Supply Voltage Limit-Max :
- 7V
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Wideband :
- No
- Length :
- 3mm
- Operating Supply Voltage :
- 3.3, 6 V
- Max Supply Voltage :
- 5.5 V
- RoHS :
- Compliant
- Micropower :
- No
- Package :
- Tube
- Current - Output / Channel :
- 25mA
- Number of Channels :
- 2
- Screening Level :
- Extended Industrial
- Pin Count :
- 8
- Mounting Style :
- SMD/SMT
- Single Supply Voltage (Max) :
- 6(V)
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Manufacturer :
- Microchip
- Current - Input Bias :
- 1pA
- Voltage Gain in dB :
- 110(dB)
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Shut Down Support :
- No
- Voltage - Supply, Single/Dual (±) :
- 2.4V~6V
- Dual Supply Voltage (Min) :
- Not Required(V)
- Published :
- 2000
- Input Bias Current :
- 0.001(nA)
- Supplier Device Package :
- 8-MSOP
- Supplier Package :
- MSOP
- Common Mode Rejection Ratio :
- 70 dB
- Rail to Rail :
- Rail to Rail Input/Output
- Output Type :
- Rail-to-Rail
- Shutdown :
- No Shutdown
- Number of Amplifiers :
- 2
- Number of Channels per Chip :
- 2
- Pbfree Code :
- yes
- Frequency Compensation :
- yes
- Max Operating Temperature :
- 125 °C
- Number of Elements :
- 2
- Dual Supply Voltage (Max) :
- Not Required(V)
- Product Type :
- Op Amps - Operational Amplifiers
- Input Offset Voltage :
- 3(mV)
- Input Offset Voltage (Vos) :
- 3mV
- Current - Supply :
- 1mA
- Supply Current-Max :
- 2.6 mA
- Voltage - Input Offset :
- 3mV
- Unity Gain Bandwidth Product :
- 10
- Product :
- Operational Amplifiers
- Package Type :
- MSOP
- Nominal Supply Current :
- 1mA
- Supply Voltage :
- 5V
- Number of Functions :
- 2
- Rad Hardened :
- No
- Power Supply Requirement :
- Single
- Voltage Gain dB :
- 110 dB
- Min Supply Voltage :
- 2.4 V
- Type :
- General Purpose Amplifier
- Height :
- 850μm
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Series :
- --
- Terminal Pitch :
- 0.65mm
- Average Bias Current-Max (IIB) :
- 0.005μA
- HTS Code :
- 8542.33.00.01
- Minimum Operating Temperature :
- -40 °C
- Mounting :
- Surface Mount
- JESD-30 Code :
- S-PDSO-G8
- JESD-609 Code :
- e3
- Brand :
- Microchip Technology / Atmel
- Output Current :
- 25mA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Terminal Form :
- Gull wing
- Seated Height-Max :
- 1.1 mm
- Datasheets
- MCP6292-E/MS

2 Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 3.3, 6 V 2.4V~6V MCP6292 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6292-E/MS Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 1mA , this buffer op amp will be able to operate. Keeping the voltage gain at 110dB is the best course of action. The buffer amp consists of 2 circuits in total. 2 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 125 °C degrees. A total of 2 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3.3, 6 V. A supply of 1mA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.5 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.4 V, it is recommended to keep it higher. The -- stands for the buffer op amp's serial number. There are a maximum of 31620 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. As you can see, the linear amplifier has 2 amplifiers. The buffer op amp has 8 terminals that can be used for connecting wires to the amplifier.
MCP6292-E/MS Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6292-E/MS Applications
There are a lot of Microchip Technology
MCP6292-E/MS Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















