MCP6285-E/P
- Mfr.Part #
- MCP6285-E/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8DIP
- Stock
- 33,341
- In Stock :
- 33,341
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Product Type :
- Op Amps - Operational Amplifiers
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Series :
- --
- Terminal Position :
- Dual
- Shutdown :
- No Shutdown
- Pin Count :
- 8
- Base Part Number :
- MCP6285
- Number of Terminals :
- 8
- Product :
- Operational Amplifiers
- Micropower :
- yes
- Packaging :
- Tube
- Max Supply Voltage :
- 5.5 V
- Package Shape :
- RECTANGULAR
- Voltage - Supply, Single/Dual (±) :
- 2.2V~6V
- Output Current :
- 25mA
- Unity Gain BW-Nom :
- 5000 kHz
- Brand :
- Microchip Technology
- Voltage Gain-Min :
- 31620
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Supplier Package :
- PDIP
- Voltage - Input Offset :
- 3mV
- Surface Mount :
- No
- Mounting :
- Through Hole
- Average Bias Current-Max (IIB) :
- 0.005μA
- Output Current per Channel :
- 25 mA
- Maximum Operating Supply Voltage :
- 5.5 V
- Published :
- 2008
- Mounting Style :
- Through Hole
- Radiation Hardening :
- No
- JESD-609 Code :
- e3
- Product Category :
- Operational Amplifiers - Op Amps
- Temperature Grade :
- Automotive
- Input Offset Voltage (Vos) :
- 3mV
- Power Supplies :
- 2.5/5 V
- Number of Terminations :
- 8
- Peak Reflow Temperature (Cel) :
- Not Applicable
- Mounting Type :
- Through Hole
- Height :
- 3.3 mm
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Base Product Number :
- MCP6285
- Supplier Device Package :
- 8-PDIP
- Number of Channels :
- 2 Channel
- Terminal Form :
- THROUGH-HOLE
- Amplifier Type :
- GENERAL PURPOSE
- Mount :
- Through Hole
- Maximum Operating Temperature :
- + 125 C
- Voltage Gain :
- 110dB
- Operating Supply Voltage :
- 5.5 V
- JESD-30 Code :
- R-PDIP-T8
- Pbfree Code :
- yes
- HTS Code :
- 8542.33.00.01
- Gain Bandwidth Product :
- 5MHz
- Nominal Supply Current :
- 450μA
- Programmable Power :
- No
- Current - Supply :
- 450μA
- Operating Supply Current :
- 450 uA
- Operating Temperature :
- -40°C~125°C
- Factory Lead Time :
- 7 Weeks
- Min Supply Voltage :
- 2.2 V
- Output Type :
- Rail-to-Rail
- Qualification :
- AEC-Q100
- Number of Functions :
- 2
- Supply Voltage :
- 5V
- Input Bias Current :
- 1 pA
- Low-Offset :
- No
- Width :
- 6.35 mm
- Number of Pins :
- 8
- Screening Level :
- Extended Industrial
- Height Seated (Max) :
- 5.334mm
- Number of Channels per Chip :
- 2
- Low-Bias :
- yes
- ECCN Code :
- EAR99
- Seated Height-Max :
- 5.334 mm
- Terminal Finish :
- Matte Tin (Sn)
- Power :
- No
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Input Offset Voltage-Max :
- 5000 µV
- RoHS Status :
- ROHS3 Compliant
- Supply Voltage Limit-Max :
- 7V
- Frequency Compensation :
- yes
- Type :
- General Purpose Amplifier
- Voltage Gain dB :
- 110 dB
- Common Mode Rejection Ratio :
- 70 dB
- Quiescent Current :
- 450μA
- RoHS :
- Details
- Supply Current-Max :
- 1.14 mA
- Max Operating Temperature :
- 125 °C
- Supply Type :
- Single
- Architecture :
- VOLTAGE-FEEDBACK
- Reach Compliance Code :
- Compliant
- Number of Circuits :
- 2
- Slew Rate :
- 2.5V/µs
- Wideband :
- No
- Length :
- 9.27 mm
- Package :
- Tube
- Minimum Operating Temperature :
- - 40 C
- Terminal Pitch :
- 2.54 mm
- Current - Input Bias :
- 1pA
- Product Status :
- Active
- Current - Output / Channel :
- 25mA
- Number of Elements :
- 2
- Manufacturer :
- Microchip
- Min Operating Temperature :
- -40 °C
- Qualification Status :
- Not Qualified
- Datasheets
- MCP6285-E/P

2 Channel Channels 25 mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.2V~6V MCP6285 8 Pins 8-DIP (0.300, 7.62mm)
MCP6285-E/P Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 450 uA , this buffer op amp will be able to operate. Keeping the voltage gain at 110dB is the best course of action. The buffer amp consists of 2 circuits in total. 2 Channel channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 125 °C degrees. A total of 2 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. A supply of 450µA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.5 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.2 V, it is recommended to keep it higher. The -- stands for the buffer op amp's serial number. As a result, linear amplifier's quiescent current is 450μA. There are a maximum of 31620 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. The buffer op amp has 8 terminals that can be used for connecting wires to the amplifier.
MCP6285-E/P Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6285-E/P Applications
There are a lot of Microchip Technology
MCP6285-E/P Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















