MCP6285-E/MS
- Mfr.Part #
- MCP6285-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 9,683
- In Stock :
- 9,683
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Nominal Supply Current :
- 450μA
- Power :
- No
- Input Offset Voltage-Max :
- 5000 µV
- RoHS Status :
- ROHS3 Compliant
- Average Bias Current-Max (IIB) :
- 0.005μA
- JESD-30 Code :
- S-PDSO-G8
- Max Supply Voltage :
- 5.5 V
- Reach Compliance Code :
- Compliant
- Voltage Gain dB :
- 110 dB
- Programmable Power :
- No
- Number of Functions :
- 2
- JESD-609 Code :
- e3
- Current - Supply :
- 450μA
- Series :
- --
- ECCN Code :
- EAR99
- Mounting Style :
- SMD/SMT
- Length :
- 3mm
- Maximum Operating Temperature :
- + 125 C
- Voltage Gain :
- 110dB
- Terminal Form :
- Gull wing
- Low-Offset :
- No
- Shutdown :
- No Shutdown
- Maximum Operating Supply Voltage :
- 5.5 V
- Qualification :
- AEC-Q100
- Wideband :
- No
- Number of Elements :
- 2
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Supply Voltage Limit-Max :
- 7V
- Number of Terminations :
- 8
- Common Mode Rejection Ratio :
- 70 dB
- Number of Terminals :
- 8
- Slew Rate :
- 2.5V/µs
- Number of Channels :
- 2 Channel
- Terminal Finish :
- Matte Tin (Sn)
- Output Current per Channel :
- 25 mA
- Current - Input Bias :
- 1pA
- Screening Level :
- Extended Industrial
- Peak Reflow Temperature (Cel) :
- 260
- Supplier Package :
- MSOP
- Min Supply Voltage :
- 2.2 V
- Type :
- General Purpose Amplifier
- Seated Height-Max :
- 1.1 mm
- Product Category :
- Operational Amplifiers - Op Amps
- Temperature Grade :
- Automotive
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Supply Current-Max :
- 1.14 mA
- Product Status :
- Active
- Published :
- 2008
- Surface Mount :
- yes
- Input Bias Current :
- 1 pA
- Input Offset Voltage (Vos) :
- 3mV
- Voltage - Input Offset :
- 3mV
- Architecture :
- VOLTAGE-FEEDBACK
- Terminal Position :
- Dual
- Max Operating Temperature :
- 125 °C
- Operating Supply Current :
- 450 uA
- Number of Channels per Chip :
- 2
- Terminal Pitch :
- 0.65mm
- Output Current :
- 25mA
- Product :
- Operational Amplifiers
- Pin Count :
- 8
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Package :
- Tube
- Operating Temperature :
- -40°C~125°C
- Output Type :
- Rail-to-Rail
- Supply Voltage :
- 5V
- Qualification Status :
- Not Qualified
- Number of Pins :
- 8
- Product Type :
- Op Amps - Operational Amplifiers
- Mounting :
- Surface Mount
- Package Shape :
- Square
- Low-Bias :
- yes
- Pbfree Code :
- yes
- Brand :
- Microchip Technology
- Base Part Number :
- MCP6285
- Height :
- 0.85 mm
- HTS Code :
- 8542.33.00.01
- Operating Supply Voltage :
- 5.5 V
- Min Operating Temperature :
- -40 °C
- Base Product Number :
- MCP6285
- Manufacturer :
- Microchip
- Current - Output / Channel :
- 25mA
- Gain Bandwidth Product :
- 5MHz
- Factory Lead Time :
- 20 Weeks
- Number of Circuits :
- 2
- Voltage Gain-Min :
- 31620
- Unity Gain BW-Nom :
- 5000 kHz
- Power Supplies :
- 2.5/5 V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Packaging :
- Tube
- Frequency Compensation :
- yes
- Mounting Type :
- Surface Mount
- Mount :
- Surface Mount
- Supplier Device Package :
- 8-MSOP
- Voltage - Supply, Single/Dual (±) :
- 2.2V~6V
- Height Seated (Max) :
- 1.1mm
- Amplifier Type :
- GENERAL PURPOSE
- Minimum Operating Temperature :
- - 40 C
- Supply Type :
- Single
- Width :
- 3 mm
- Radiation Hardening :
- No
- RoHS :
- Details
- Micropower :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Datasheets
- MCP6285-E/MS

2 Channel Channels 25 mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.2V~6V MCP6285 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6285-E/MS Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 3mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 450 uA . It is recommended to keep the voltage gain at 110dB at all times. This op amp contains 2 circuits. On the buffer amps, there are 2 Channel channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For this linear amplifier to work, the temperature should not be below -40 °C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125 °C. The total number of elements in this buffer amplifier is 2. The operating supply voltage of the buffer op amp is rated at 5.5 V. It is recommended that you use an 450μA power supply with this electrical part in order for it to operate correctly. Under 5.5 V is the minimum supply voltage for this electric component. Over 2.2 V is a recommended supply voltage for buffer ampsInstrumentation amplifiers are numbered by their -- series. This op amp ic is capable of conducting at least 31620 voltage gains. There are 8 terminals for wires on this op amp ic.
MCP6285-E/MS Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6285-E/MS Applications
There are a lot of Microchip Technology
MCP6285-E/MS Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















