MCP6284-E/P
- Mfr.Part #
- MCP6284-E/P
- Manufacturer
- Microchip Technology
- Package / Case
- 14-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14DIP
- Stock
- 6,979
- In Stock :
- 6,979
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Supply Voltage :
- 5V
- Supplier Package :
- PDIP
- Operating Temperature :
- -40°C~125°C
- Supply Voltage Limit-Max :
- 7V
- Rad Hardened :
- No
- ECCN Code :
- EAR99
- Packaging :
- Tube
- MSL :
- -
- Voltage Gain :
- 110dB
- Factory Lead Time :
- 10 Weeks
- Min Operating Temperature :
- -40 °C
- Product Category :
- Operational Amplifiers - Op Amps
- Unity Gain Bandwidth Product :
- 5
- Surface Mount :
- No
- Gain Bandwidth Product :
- 5MHz
- Low-Bias :
- yes
- Current - Input Bias :
- 1pA
- Base Part Number :
- MCP6284
- Terminal Pitch :
- 2.54 mm
- Rail to Rail :
- Rail to Rail Input/Output
- Low-Offset :
- No
- Peak Reflow Temperature (Cel) :
- Not Applicable
- Output Current per Channel :
- 25mA
- Terminal Finish :
- Matte Tin (Sn)
- Maximum Input Voltage :
- 6 V
- Voltage Gain dB :
- 110 dB
- Number of Channels :
- 4
- Qualification Status :
- Not Qualified
- Number of Elements :
- 4
- Mounting :
- Through Hole
- Current - Supply :
- 450μA
- Amplifier Type :
- GENERAL PURPOSE
- RoHS Status :
- ROHS3 Compliant
- Dual Supply Voltage (Min) :
- Not Required(V)
- Shut Down Feature :
- No
- Supplier Device Package :
- 14-PDIP
- JESD-609 Code :
- e3
- Number of Channels per Chip :
- 4
- Power Supplies :
- 2.5/5V
- Manufacturer :
- Microchip
- Maximum Operating Temperature :
- +125 °C
- Terminal Form :
- THROUGH-HOLE
- Operating Temperature Classification :
- Automotive
- Product Status :
- Active
- Pbfree Code :
- yes
- Pin Count :
- 14
- Input Offset Voltage (Vos) :
- 3mV
- Seated Height-Max :
- 5.334 mm
- Single Supply Voltage (Min) :
- 2.2(V)
- Input Offset Voltage :
- 3(mV)
- Terminal Position :
- Dual
- Current - Output / Channel :
- 25mA
- Package Shape :
- RECTANGULAR
- Published :
- 2004
- Voltage Gain-Min :
- 31620
- Mounting Type :
- Through Hole
- Power Supply Rejection Ratio :
- 70(dB)
- Number of Functions :
- 4
- Frequency Compensation :
- yes
- Max Operating Temperature :
- 125 °C
- Schedule B :
- 8542330000, 8542330000/8542330000/8542330000/8542330000/8542330000
- Number of Circuits :
- 4
- Voltage Gain in dB :
- 110(dB)
- Mount :
- Through Hole
- Micropower :
- yes
- Dimensions :
- 19.05 x 6.35 x 3.3mm
- Common Mode Rejection Ratio :
- 70 dB
- Reach Compliance Code :
- Compliant
- Series :
- --
- Minimum Operating Temperature :
- -40 °C
- Output Type :
- Rail-to-Rail
- Max Supply Voltage :
- 5.5 V
- Number of Terminations :
- 14
- RoHS :
- Details
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Package :
- Tube
- Max Input Voltage :
- 6V
- Temperature Grade :
- Automotive
- HTS Code :
- 8542.33.00.01
- Operating Temp Range :
- -40C to 125C
- Voltage - Supply, Single/Dual (±) :
- 2.2V~6V
- Width :
- 7.112mm
- Supply Current-Max :
- 2.28 mA
- Number of Amplifiers :
- 4
- Product Type :
- Op Amps - Operational Amplifiers
- Brand :
- Microchip Technology / Atmel
- Nominal Supply Current :
- 450μA
- Operating Supply Voltage :
- 5.5 V
- Base Product Number :
- MCP6284
- Single Supply Voltage (Max) :
- 6(V)
- Supply Type :
- Single
- Package Type :
- PDIP
- Input Offset Voltage-Max :
- 5000 µV
- Dual Supply Voltage (Max) :
- Not Required(V)
- Number of Terminals :
- 14
- Single Supply Voltage (Typ) :
- 3/5(V)
- Length :
- 19.69mm
- Min Input Voltage :
- 2.2V
- Qualification :
- AEC-Q100
- Max Frequency :
- 1kHz
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Number of Pins :
- 14
- Radiation Hardening :
- No
- REACH SVHC :
- No SVHC
- Screening Level :
- Extended Industrial
- Voltage - Input Offset :
- 3mV
- Package / Case :
- 14-DIP (0.300, 7.62mm)
- Output Current :
- 25mA
- Type :
- General Purpose Amplifier
- Power Supply Type :
- Single
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Lead Free :
- Contains Lead
- Product :
- Operational Amplifiers
- Min Supply Voltage :
- 2.2 V
- Bandwidth :
- 5MHz
- Average Bias Current-Max (IIB) :
- 0.005μA
- Architecture :
- VOLTAGE-FEEDBACK
- JESD-30 Code :
- R-PDIP-T14
- Mounting Style :
- Through Hole
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Input Bias Current :
- 0.001(nA)
- Height :
- 4.953mm
- Operating Supply Current :
- 450μA
- Shutdown :
- No Shutdown
- Input Voltage Range :
- 2.2 → 6 V
- Slew Rate :
- 2.5V/µs
- Unity Gain BW-Nom :
- 5000 kHz
- Power Supply Requirement :
- Single
- Maximum Operating Supply Voltage :
- 5.5 V
- Datasheets
- MCP6284-E/P

4 Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.2V~6V MCP6284 14 Pins 14-DIP (0.300, 7.62mm)
MCP6284-E/P Overview
In order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 3mV. This electronic component is recommended to be mounted using the mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 450μA and 10 . Maintain 110dB as the voltage gain. In total, there are 4 circuits on this buffer amplifier. Buffer op amp is equipped with 4 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40 °C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125 °C degrees. As a whole, there are 4 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. This electronic part is recommended to be used with an 450µA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 5.5 V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.2 V when using it. -- is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 31620 is the minimum voltage gain that this instrumentation amplifier is capable of producing. A linear amplifier such as this has 4 amplifiers on it. As part of this op amp ic, there are 14 terminals on which wires can be connected.
MCP6284-E/P Features
14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
14Terminations
MCP6284-E/P Applications
There are a lot of Microchip Technology
MCP6284-E/P Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















