MCP6282T-E/MS
- Mfr.Part #
- MCP6282T-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 25,220
- In Stock :
- 25,220
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Common Mode Rejection Ratio :
- 70 dB
- Operating Supply Current :
- 450μA
- Amplifier Type :
- GENERAL PURPOSE
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Micropower :
- yes
- Height Seated (Max) :
- 1.1mm
- Packing Method :
- Tape and Reel
- Frequency Compensation :
- yes
- Min Operating Temperature :
- -40 °C
- HTS Code :
- 8542.33.00.01
- JESD-609 Code :
- e3
- Supply Voltage :
- 5V
- Nominal Supply Current :
- 450μA
- Peak Reflow Temperature (Cel) :
- 260
- Average Bias Current-Max (IIB) :
- 0.005μA
- Product Category :
- Operational Amplifiers - Op Amps
- Base Product Number :
- MCP6282
- Supply Type :
- Single
- Schedule B :
- 8542330000, 8542330000/8542330000/8542330000/8542330000/8542330000
- Input Offset Voltage :
- 3(mV)
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power Supply Rejection Ratio :
- 70(dB)
- Single Supply Voltage (Max) :
- 6(V)
- Manufacturer :
- Microchip
- Input Bias Current :
- 0.001(nA)
- Length :
- 3mm
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Type :
- General Purpose Amplifier
- Number of Elements :
- 2
- Radiation Hardening :
- No
- ECCN Code :
- EAR99
- Temperature Grade :
- Automotive
- Unity Gain BW-Nom :
- 5000 kHz
- Slew Rate :
- 2.5V/µs
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Number of Pins :
- 8
- Max Operating Temperature :
- 125 °C
- Current - Supply :
- 450μA
- Factory Lead Time :
- 12 Weeks
- RoHS Status :
- ROHS3 Compliant
- Current - Input Bias :
- 1pA
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Max Supply Voltage :
- 5.5 V
- Maximum Operating Temperature :
- + 125 C
- Power Supplies :
- 2.5/5 V
- Pbfree Code :
- yes
- Operating Temperature :
- -40°C~125°C
- Mounting Style :
- SMD/SMT
- Published :
- 2008
- JESD-30 Code :
- S-PDSO-G8
- Maximum Operating Supply Voltage :
- 5.5 V
- Voltage Gain dB :
- 110 dB
- Brand :
- Microchip Technology / Atmel
- Number of Terminations :
- 8
- Package Shape :
- Square
- Voltage - Input Offset :
- 3mV
- Width :
- 3 mm
- Minimum Operating Temperature :
- - 40 C
- Terminal Finish :
- Matte Tin (Sn)
- Screening Level :
- Extended Industrial
- Output Type :
- Rail-to-Rail
- Supplier Package :
- MSOP
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Terminal Form :
- Gull wing
- Input Offset Voltage-Max :
- 5000 µV
- Terminal Position :
- Dual
- Single Supply Voltage (Min) :
- 2.2(V)
- Terminal Pitch :
- 0.65mm
- Base Part Number :
- MCP6282
- Low-Offset :
- No
- Height :
- 0.85 mm
- Lead Free :
- Lead Free
- Input Offset Voltage (Vos) :
- 3mV
- Supply Voltage Limit-Max :
- 7V
- Voltage Gain in dB :
- 110(dB)
- Number of Terminals :
- 8
- Mounting Type :
- Surface Mount
- Product Type :
- Op Amps - Operational Amplifiers
- Voltage Gain-Min :
- 31620
- Rad Hardened :
- No
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Unity Gain Bandwidth Product :
- 5
- Pin Count :
- 8
- Product :
- Operational Amplifiers
- Operating Supply Voltage :
- 5.5 V
- Mounting :
- Surface Mount
- Bandwidth :
- 5MHz
- Number of Circuits :
- 2
- Operating Temperature Classification :
- Automotive
- Reach Compliance Code :
- Compliant
- Package Type :
- MSOP
- Seated Height-Max :
- 1.1 mm
- Power Supply Requirement :
- Single
- Voltage - Supply, Single/Dual (±) :
- 2.2V~6V
- Voltage Gain :
- 110dB
- Number of Channels per Chip :
- 2
- Surface Mount :
- yes
- MSL :
- MSL 2 - 1 year
- Operating Temp Range :
- -40C to 125C
- Packaging :
- Tape and Reel (TR)
- Dual Supply Voltage (Min) :
- Not Required(V)
- RoHS :
- Details
- Mount :
- Surface Mount
- Output Current per Channel :
- 25mA
- Qualification Status :
- Not Qualified
- Output Current :
- 25mA
- Number of Functions :
- 2
- Shutdown :
- No Shutdown
- Architecture :
- VOLTAGE-FEEDBACK
- Product Status :
- Active
- Shut Down Feature :
- No
- Number of Channels :
- 2 Channel
- Series :
- --
- Min Supply Voltage :
- 2.2 V
- Supply Current-Max :
- 1.14 mA
- Dual Supply Voltage (Max) :
- Not Required(V)
- Single Supply Voltage (Typ) :
- 3/5(V)
- Current - Output / Channel :
- 25mA
- Supplier Device Package :
- 8-MSOP
- Qualification :
- AEC-Q100
- Gain Bandwidth Product :
- 5MHz
- Low-Bias :
- yes
- Datasheets
- MCP6282T-E/MS

2 Channel Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.2V~6V MCP6282 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6282T-E/MS Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 3mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 450μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 Channel channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of buffer amplifier. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 450µA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 2.2 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 31620. 8 wire terminals are provided on this op amp.
MCP6282T-E/MS Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6282T-E/MS Applications
There are a lot of Microchip Technology
MCP6282T-E/MS Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















