MCP6281-E/P
- Mfr.Part #
- MCP6281-E/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8DIP
- Stock
- 8,449
- In Stock :
- 8,449
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Temperature Grade :
- Automotive
- Pin Count :
- 8
- Terminal Pitch :
- 2.54mm
- REACH SVHC :
- No SVHC
- Base Product Number :
- MCP6281
- Supply Type :
- Single
- Product Status :
- Active
- Current - Supply :
- 450μA
- Bandwidth :
- 5MHz
- Nominal Supply Current :
- 450μA
- Number of Circuits :
- 1
- RoHS :
- Details
- Operating Temperature Classification :
- Automotive
- Low-Bias :
- yes
- Length :
- 10.16mm
- Dual Supply Voltage (Max) :
- Not Required(V)
- Voltage Gain :
- 110dB
- Brand :
- Microchip Technology / Atmel
- Input Offset Voltage :
- 3(mV)
- Number of Terminations :
- 8
- Wideband :
- No
- Terminal Form :
- THROUGH-HOLE
- Power Supplies :
- 2.5/5V
- JESD-609 Code :
- e3
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- HTS Code :
- 8542.33.00.01
- Common-mode Reject Ratio-Min :
- 65 dB
- Max Supply Voltage :
- 5.5 V
- Qualification Status :
- Not Qualified
- Output Current per Channel :
- 25 mA
- JESD-30 Code :
- R-PDIP-T8
- Power Supply Rejection Ratio :
- 70(dB)
- Packaging :
- Tube
- Unity Gain BW-Nom :
- 5000 kHz
- Screening Level :
- Extended Industrial
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Product Type :
- Op Amps - Operational Amplifiers
- Programmable Power :
- No
- Published :
- 2004
- Dual Supply Voltage (Min) :
- Not Required(V)
- Current - Output / Channel :
- 25 mA
- Minimum Operating Temperature :
- -40 °C
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Output Type :
- Rail-to-Rail
- Low-Offset :
- No
- Current - Input Bias :
- 1pA
- Voltage - Supply, Single/Dual (±) :
- 2.2V~6V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Terminals :
- 8
- Max Input Voltage :
- 6V
- Height :
- 4.953mm
- Number of Channels :
- 1
- Type :
- General Purpose Amplifier
- Input Offset Voltage-Max :
- 5000 µV
- Maximum Operating Supply Voltage :
- 5.5 V
- Voltage - Input Offset :
- 3 mV
- Operating Temperature :
- -40°C~125°C
- Factory Lead Time :
- 13 Weeks
- Voltage Gain in dB :
- 110(dB)
- Qualification :
- AEC-Q100
- Power Supply Type :
- Single
- Output Current :
- 25mA
- Mounting :
- Through Hole
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Seated Height-Max :
- 5.334 mm
- Unity Gain Bandwidth Product :
- 5
- Mounting Style :
- Through Hole
- RoHS Status :
- ROHS3 Compliant
- Supplier Device Package :
- 8-PDIP
- Single Supply Voltage (Max) :
- 6(V)
- Product Category :
- Operational Amplifiers - Op Amps
- Shutdown :
- No Shutdown
- Sensing Method :
- Resistive
- Supply Current-Max :
- 0.57 mA
- Peak Reflow Temperature (Cel) :
- Not Applicable
- Supply Voltage Limit-Max :
- 7V
- Number of Pins :
- 8
- Amplifier Type :
- GENERAL PURPOSE
- Series :
- -
- Min Operating Temperature :
- -40 °C
- Schedule B :
- 8542330000
- Terminal Finish :
- Matte Tin (Sn)
- Common Mode Rejection Ratio :
- 70 dB
- Terminal Position :
- Dual
- Number of Elements :
- 1
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Input Bias Current :
- 0.001(nA)
- Power Supply Requirement :
- Single
- Reach Compliance Code :
- Compliant
- Pbfree Code :
- yes
- Radiation Hardening :
- No
- Operating Supply Voltage :
- 5.5, 4.5 V
- Mount :
- Through Hole
- Width :
- 7.112mm
- ECCN Code :
- EAR99
- Architecture :
- VOLTAGE-FEEDBACK
- Number of Functions :
- 1
- Voltage Gain-Min :
- 31620
- Power :
- No
- Shut Down Feature :
- No
- Min Input Voltage :
- 2.2V
- Number of Amplifiers :
- 1
- Supply Voltage :
- 5V
- Micropower :
- yes
- Supplier Package :
- PDIP
- Voltage Gain dB :
- 110 dB
- Lead Free :
- Lead Free
- Slew Rate :
- 2.5V/µs
- Manufacturer :
- Microchip
- Dimensions :
- 9.27 x 6.35 x 3.3mm
- Mounting Type :
- Through Hole
- Shut Down Support :
- No
- Input Offset Voltage (Vos) :
- 3mV
- Package :
- Tube
- MSL :
- -
- Product :
- Operational Amplifiers
- Rad Hardened :
- No
- Min Supply Voltage :
- 2.2 V
- Surface Mount :
- No
- Single Supply Voltage (Typ) :
- 3/5(V)
- Maximum Input Voltage :
- 6 V
- Package Type :
- PDIP
- Operating Temp Range :
- -40C to 125C
- Operating Supply Current :
- 450 uA
- Rail to Rail :
- Rail to Rail Input/Output
- Package Shape :
- RECTANGULAR
- Input Voltage Range :
- 2.2 → 6 V
- Maximum Operating Temperature :
- +125 °C
- Frequency Compensation :
- yes
- Max Frequency :
- 1kHz
- Single Supply Voltage (Min) :
- 2.2(V)
- Average Bias Current-Max (IIB) :
- 0.005μA
- Base Part Number :
- MCP6281
- Number of Channels per Chip :
- 1
- Gain Bandwidth Product :
- 5 MHz
- Max Operating Temperature :
- 125 °C
- Datasheets
- MCP6281-E/P

1 Channels 25 mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5, 4.5 V 2.2V~6V MCP6281 8 Pins 8-DIP (0.300, 7.62mm)
MCP6281-E/P Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 3mV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 450 uA can be used to operate this linear amplifier. There should be no change in the voltage gain at 110dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125 °C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5, 4.5 V. For optimal performance, this electrical part should be connected to a supply with a current of 450µA. It is important to keep in mind that the power supply voltage of this electric component is below 5.5 V, which is suitable. Keeping the linear amplifier's supply voltage above 2.2 V is recommended. Buffer op amp series numbers are indicated by the -. This op amp ic can conduct a minimum voltage gain of 31620. The linear amplifier has 1 amplifiers. There are 8 wire terminals on this op amp ic.
MCP6281-E/P Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6281-E/P Applications
There are a lot of Microchip Technology
MCP6281-E/P Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















