MCP625-E/MF
- Mfr.Part #
- MCP625-E/MF
- Manufacturer
- Microchip Technology
- Package / Case
- 10-VFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 10DFN
- Stock
- 125
- In Stock :
- 125
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Package :
- Tube
- Width :
- 3mm
- Operating Supply Current :
- 2.5mA
- Voltage Gain-Min :
- 25100
- Package / Case :
- 10-VFDFN Exposed Pad
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Number of Circuits :
- 2
- Supply Voltage :
- 2.5V
- Gain Bandwidth Product :
- 20MHz
- Micropower :
- No
- Type :
- General Purpose Amplifier
- Voltage Gain :
- 126dB
- Surface Mount :
- yes
- Nominal Supply Current :
- 2.5mA
- RoHS Status :
- ROHS3 Compliant
- Product Status :
- Active
- Screening Level :
- Extended
- Qualification Status :
- Not Qualified
- Factory Lead Time :
- 8 Weeks
- Shutdown :
- No Shutdown
- Product Type :
- Op Amps - Operational Amplifiers
- Terminal Position :
- Dual
- Output Current per Channel :
- 70mA
- Average Bias Current-Max (IIB) :
- 0.005μA
- Mount :
- Surface Mount
- Terminal Form :
- NO LEAD
- Product Category :
- Operational Amplifiers - Op Amps
- Peak Reflow Temperature (Cel) :
- 260
- Qualification :
- AEC-Q100
- Common Mode Rejection Ratio :
- 65 dB
- Power Supplies :
- 3/5V
- Voltage Gain dB :
- 126 dB
- Bandwidth :
- 20MHz
- Power Supply Type :
- Single
- Unity Gain BW-Nom :
- 20000 kHz
- Series :
- mCal Technology
- Input Offset Voltage-Max :
- 200 µV
- Lead Free :
- Lead Free
- Mounting :
- Surface Mount
- Supply Current-Max :
- 7.2 mA
- Number of Channels per Chip :
- 2
- Low-Bias :
- yes
- Brand :
- Microchip Technology
- Amplifier Type :
- GENERAL PURPOSE
- Voltage - Input Offset :
- 200μV
- Architecture :
- VOLTAGE-FEEDBACK
- RoHS :
- Details
- Supply Voltage Limit-Max :
- 6.5V
- Number of Functions :
- 2
- Seated Height-Max :
- 1 mm
- Packaging :
- Tube
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Number of Pins :
- 10
- Output Current :
- 70mA
- Pin Count :
- 10
- Maximum Operating Supply Voltage :
- 5.5 V
- Number of Terminals :
- 10
- Wideband :
- No
- Programmable Power :
- No
- Slew Rate :
- 10V/μs
- Current - Input Bias :
- 5pA
- Terminal Pitch :
- 0.5mm
- Mounting Style :
- SMD/SMT
- Power :
- No
- Reach Compliance Code :
- Compliant
- Height :
- 950μm
- Max Frequency :
- 1MHz
- Base Product Number :
- MCP625
- Number of Terminations :
- 10
- JESD-609 Code :
- e3
- JESD-30 Code :
- S-PDSO-N10
- Published :
- 2009
- Number of Channels :
- 2
- Current - Output / Channel :
- 70mA
- Package Shape :
- Square
- Product :
- Operational Amplifiers
- HTS Code :
- 8542.33.00.01
- Radiation Hardening :
- No
- Mounting Type :
- Surface Mount
- Minimum Operating Temperature :
- - 40 C
- Pbfree Code :
- yes
- Supply Type :
- Single
- Shut Down Support :
- No
- Manufacturer :
- Microchip
- Temperature Grade :
- Automotive
- Terminal Finish :
- Matte Tin (Sn) - annealed
- ECCN Code :
- EAR99
- Frequency Compensation :
- yes
- Input Offset Voltage (Vos) :
- 200μV
- Output Type :
- Rail-to-Rail
- Base Part Number :
- MCP625
- Low-Offset :
- yes
- Operating Supply Voltage :
- 5.5 V
- Maximum Operating Temperature :
- + 125 C
- Operating Temperature :
- -40°C~125°C
- Length :
- 3mm
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Current - Supply :
- 2.5mA
- Supplier Package :
- DFN EP
- REACH SVHC :
- No SVHC
- Supplier Device Package :
- 10-DFN (3x3)
- Datasheets
- MCP625-E/MF

2 Channels 70mA per Channel 5pA 65 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V MCP625 10 Pins 10-VFDFN Exposed Pad
MCP625-E/MF Overview
In order to protect the op amps, a 10-VFDFN Exposed Pad case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 10. It consists of a total of 10 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. It has 10 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 200μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.5mA and 10 . Maintain 126dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5.5 V. This electronic part is recommended to be used with an 2.5mA supply for best performance. mCal Technology is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 25100 is the minimum voltage gain that this instrumentation amplifier is capable of producing. As part of this op amp ic, there are 10 terminals on which wires can be connected.
MCP625-E/MF Features
10 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
10Terminations
MCP625-E/MF Applications
There are a lot of Microchip Technology
MCP625-E/MF Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















