MCP6241T-E/MS
- Mfr.Part #
- MCP6241T-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8MSOP
- Stock
- 48,798
- In Stock :
- 48,798
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Terminal Finish :
- Matte Tin (Sn)
- Product :
- Operational Amplifiers
- RoHS Status :
- ROHS3 Compliant
- Reach Compliance Code :
- Compliant
- JESD-609 Code :
- e3
- Wideband :
- No
- Number of Channels :
- 1 Channel
- Nominal Supply Current :
- 50μA
- Qualification Status :
- Not Qualified
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Common-mode Reject Ratio-Min :
- 60 dB
- Power :
- No
- Gain Bandwidth Product :
- 550kHz
- Brand :
- Microchip Technology
- Voltage Gain-Min :
- 31620
- Operating Supply Voltage :
- 5.5 V
- Architecture :
- VOLTAGE-FEEDBACK
- Frequency Compensation :
- yes
- Number of Terminations :
- 8
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Length :
- 3mm
- Terminal Form :
- Gull wing
- Maximum Operating Supply Voltage :
- 5.5 V
- Number of Terminals :
- 8
- Input Offset Voltage (Vos) :
- 5mV
- Height :
- 0.85 mm
- Unity Gain BW-Nom :
- 550 kHz
- Surface Mount :
- yes
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Number of Pins :
- 8
- Seated Height-Max :
- 1.1 mm
- Number of Functions :
- 1
- Maximum Operating Temperature :
- + 125 C
- Supplier Package :
- MSOP
- Output Current per Channel :
- 23 mA
- Slew Rate :
- 0.3V/µs
- Max Operating Temperature :
- 125 °C
- Supplier Device Package :
- 8-MSOP
- Product Category :
- Operational Amplifiers - Op Amps
- Mounting Style :
- SMD/SMT
- Current - Output / Channel :
- 23mA
- Terminal Position :
- Dual
- Product Status :
- Active
- Supply Voltage :
- 5V
- Factory Lead Time :
- 12 Weeks
- Amplifier Type :
- GENERAL PURPOSE
- Mounting :
- Surface Mount
- Min Supply Voltage :
- 1.8 V
- Supply Current-Max :
- 0.07 mA
- Base Product Number :
- MCP6241
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Packaging :
- Tape and Reel (TR)
- ECCN Code :
- EAR99
- Package Shape :
- Square
- Published :
- 2008
- Operating Temperature :
- -40°C~125°C
- Product Type :
- Op Amps - Operational Amplifiers
- Lead Free :
- Lead Free
- Current - Supply :
- 50μA
- Mount :
- Surface Mount
- Packing Method :
- Tape and Reel
- Package :
- Tape and Reel (TR)
- Manufacturer :
- Microchip
- Series :
- --
- Pin Count :
- 8
- Qualification :
- AEC-Q100
- Terminal Pitch :
- 0.65mm
- Output Type :
- Rail-to-Rail
- Output Current :
- 23mA
- Micropower :
- yes
- Low-Offset :
- No
- RoHS :
- Details
- Base Part Number :
- MCP6241
- Number of Elements :
- 1
- Peak Reflow Temperature (Cel) :
- 260
- Voltage Gain dB :
- 110 dB
- Voltage - Input Offset :
- 5mV
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Input Offset Voltage-Max :
- 7000 µV
- Width :
- 3 mm
- Programmable Power :
- No
- Common Mode Rejection Ratio :
- 60 dB
- Pbfree Code :
- yes
- Temperature Grade :
- Automotive
- Mounting Type :
- Surface Mount
- Current - Input Bias :
- 1pA
- Power Supplies :
- 2/5V
- Max Supply Voltage :
- 5.5 V
- Minimum Operating Temperature :
- - 40 C
- Low-Bias :
- yes
- Voltage Gain :
- 110dB
- JESD-30 Code :
- S-PDSO-G8
- Supply Voltage Limit-Max :
- 7V
- Radiation Hardening :
- No
- Min Operating Temperature :
- -40 °C
- HTS Code :
- 8542.33.00.01
- Supply Type :
- Single
- Type :
- General Purpose Amplifier
- Number of Circuits :
- 1
- Input Bias Current :
- 1 pA
- Number of Channels per Chip :
- 1
- Screening Level :
- Extended
- Shutdown :
- No Shutdown
- Operating Supply Current :
- 50 uA
- Datasheets
- MCP6241T-E/MS

1 Channel Channels 23 mA per Channel 1pA 60 dB Instrumentational OP Amps 5.5 V 1.8V~5.5V MCP6241 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6241T-E/MS Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 50 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 1 Channel channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 50μA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 1.8 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 31620. 8 wire terminals are provided on this op amp.
MCP6241T-E/MS Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6241T-E/MS Applications
There are a lot of Microchip Technology
MCP6241T-E/MS Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















