MCP6241RT-E/OT
- Mfr.Part #
- MCP6241RT-E/OT
- Manufacturer
- Microchip Technology
- Package / Case
- SC-74A, SOT-753
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT SOT23-5
- Stock
- 36,205
- In Stock :
- 36,205
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Low-Bias :
- yes
- Low-Offset :
- No
- Input Offset Voltage (Vos) :
- 5mV
- Product :
- Operational Amplifiers
- Nominal Supply Current :
- 50μA
- Product Status :
- Active
- Package Type :
- SOT-23
- Reach Compliance Code :
- Compliant
- Current - Supply :
- 50μA
- Amplifier Type :
- GENERAL PURPOSE
- Number of Terminations :
- 5
- Pin Count :
- 5
- Seated Height-Max :
- 1.45 mm
- Mounting :
- Surface Mount
- Base Part Number :
- MCP6241
- Shutdown :
- No Shutdown
- Product Category :
- Operational Amplifiers - Op Amps
- Micropower :
- yes
- Number of Pins :
- 5
- Voltage - Input Offset :
- 5mV
- Type :
- General Purpose Amplifier
- Common Mode Rejection Ratio :
- 60 dB
- Output Current per Channel :
- 23 mA
- Series :
- --
- RoHS :
- Details
- Peak Reflow Temperature (Cel) :
- 260
- Frequency Compensation :
- yes
- Length :
- 3.1mm
- Power :
- No
- Power Supply Type :
- Single
- Operating Temperature :
- -40°C~125°C
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Voltage Limit-Max :
- 7V
- Supplier Package :
- SOT-23
- Packing Method :
- Tape and Reel
- Terminal Pitch :
- 0.95 mm
- Supply Voltage :
- 5V
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Unity Gain BW-Nom :
- 550 kHz
- Qualification Status :
- Not Qualified
- Packaging :
- Tape and Reel (TR)
- Lead Free :
- Lead Free
- Rail to Rail :
- Rail to Rail Input/Output
- Screening Level :
- Extended
- Brand :
- Microchip Technology / Atmel
- Qualification :
- AEC-Q100
- Mounting Style :
- SMD/SMT
- Voltage Gain :
- 110dB
- Published :
- 2005
- Input Offset Voltage-Max :
- 7000 µV
- Package Shape :
- RECTANGULAR
- Wideband :
- No
- Number of Circuits :
- 1
- Pbfree Code :
- yes
- JESD-609 Code :
- e3
- Terminal Form :
- Gull wing
- Maximum Operating Temperature :
- +125 °C
- Current - Output / Channel :
- 23mA
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Surface Mount :
- yes
- Shut Down Support :
- No
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Min Operating Temperature :
- -40 °C
- Width :
- 1.8mm
- Base Product Number :
- MCP6241
- Gain Bandwidth Product :
- 550kHz
- Input Bias Current :
- 1 pA
- Number of Channels per Chip :
- 1
- Dimensions :
- 3.1 x 1.8 x 1.3mm
- Minimum Operating Temperature :
- -40 °C
- Number of Terminals :
- 5
- Number of Amplifiers :
- 1
- Temperature Grade :
- Automotive
- Max Supply Voltage :
- 5.5 V
- Factory Lead Time :
- 14 Weeks
- Product Type :
- Op Amps - Operational Amplifiers
- Supply Current-Max :
- 0.07 mA
- Min Supply Voltage :
- 1.8 V
- RoHS Status :
- ROHS3 Compliant
- Power Supplies :
- 2/5 V
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Slew Rate :
- 0.3V/µs
- Bandwidth :
- 550 kHz
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- REACH SVHC :
- No SVHC
- JESD-30 Code :
- R-PDSO-G5
- Operating Supply Current :
- 50 uA
- Mount :
- Surface Mount
- Number of Functions :
- 1
- Operating Supply Voltage :
- 5.5 V
- Output Current :
- 23mA
- HTS Code :
- 8542.33.00.01
- Terminal Position :
- Dual
- Max Operating Temperature :
- 125 °C
- Height :
- 1.3mm
- Mounting Type :
- Surface Mount
- Current - Input Bias :
- 1pA
- Programmable Power :
- No
- Supply Type :
- Single
- Output Type :
- Rail-to-Rail
- ECCN Code :
- EAR99
- Maximum Operating Supply Voltage :
- 5.5 V
- Voltage Gain-Min :
- 31620
- Number of Elements :
- 1
- Architecture :
- VOLTAGE-FEEDBACK
- Radiation Hardening :
- No
- Voltage Gain dB :
- 110 dB
- Package / Case :
- SC-74A, SOT-753
- Terminal Finish :
- Matte Tin (Sn)
- Number of Channels :
- 1
- Supplier Device Package :
- SOT-23-5
- Manufacturer :
- Microchip
- Datasheets
- MCP6241RT-E/OT

1 Channels 23 mA per Channel 1pA 60 dB Instrumentational OP Amps 5.5 V 1.8V~5.5V MCP6241 5 Pins SC-74A, SOT-753
MCP6241RT-E/OT Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 5 terminations. A total of 5 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 5 pins on it. Op amp rates 5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 50 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 1 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 50μA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 1.8 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 31620. The buffer amplifier consists of 1 amplifiers. 5 wire terminals are provided on this op amp.
MCP6241RT-E/OT Features
5 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
5Terminations
MCP6241RT-E/OT Applications
There are a lot of Microchip Technology
MCP6241RT-E/OT Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















