MCP624-E/SL

Share

Or copy the link below:

Mfr.Part #
MCP624-E/SL
Manufacturer
Microchip Technology
Package / Case
14-SOIC (0.154, 3.90mm Width)
Datasheet
Download
Description
IC OPAMP GP 4 CIRCUIT 14SOIC
Stock
12,058
In Stock :
12,058

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Microchip Technology
Product Category :
Instrumentation, OP Amps, Buffer Amps
Type :
General Purpose Amplifier
Supply Voltage Limit-Max :
6.5V
Height :
1.2446mm
Packaging :
Tube
Output Current :
70mA
Product Category :
Operational Amplifiers - Op Amps
Terminal Position :
Dual
Peak Reflow Temperature (Cel) :
260
Operating Temperature :
-40°C~125°C
Power Supply Rejection Ratio (PSRR) :
61dB
Product Status :
Active
Number of Terminations :
14
RoHS :
Compliant
JESD-609 Code :
e3
Factory Lead Time :
8 Weeks
Terminal Form :
Gull wing
Power Supply Type :
Single
Bandwidth :
20 MHz
Power Supplies :
3/5V
Output Type :
Rail-to-Rail
Architecture :
VOLTAGE-FEEDBACK
Number of Elements :
4
Qualification :
AEC-Q100
ECCN Code :
EAR99
Package :
Tube
Input Bias Current :
5 pA
Nominal Supply Current :
2.5mA
Current - Supply :
2.5mA
Screening Level :
Extended
Number of Circuits :
4
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Low-Bias :
yes
Average Bias Current-Max (IIB) :
0.005μA
Published :
2011
Product Type :
Op Amps - Operational Amplifiers
Minimum Operating Temperature :
- 40 C
Number of Amplifiers :
4
Max Supply Voltage :
5.5 V
Terminal Finish :
Matte Tin (Sn) - annealed
Base Part Number :
MCP624
Low-Offset :
yes
Max Operating Temperature :
125 °C
Time@Peak Reflow Temperature-Max (s) :
40
Amplifier Type :
GENERAL PURPOSE
Maximum Operating Temperature :
+ 125 C
Voltage - Input Offset :
200μV
RoHS Status :
ROHS3 Compliant
Mounting Style :
SMD/SMT
Supplier Device Package :
14-SOIC
Terminal Pitch :
1.27mm
Supply Type :
Single
Voltage - Supply, Single/Dual (±) :
2.5V~5.5V
Supplier Package :
SOIC N
Package / Case :
14-SOIC (0.154, 3.90mm Width)
Maximum Operating Supply Voltage :
5.5 V
Current - Input Bias :
5pA
Common Mode Rejection Ratio :
65 dB
Brand :
Microchip Technology
Input Offset Voltage (Vos) :
200μV
Product :
Operational Amplifiers
Operating Supply Voltage :
2.65, 5.5 V
Lifecycle Status :
Production (Last Updated: 2 years ago)
Shutdown :
No Shutdown
Frequency Compensation :
yes
Output Current per Channel :
70 mA
Voltage Gain :
126dB
Radiation Hardening :
No
Pin Count :
14
Current - Output / Channel :
70mA
Lead Free :
Lead Free
Gain Bandwidth Product :
20MHz
Number of Channels :
4
Series :
mCal Technology
Supply Voltage :
2.5V
Number of Pins :
14
REACH SVHC :
No SVHC
Mounting Type :
Surface Mount
Manufacturer :
Microchip
Length :
8.5598mm
Operating Supply Current :
2.5 mA
Mounting :
Surface Mount
Number of Channels per Chip :
4
Base Product Number :
MCP624
Width :
3.9116mm
Shut Down Support :
No
Mount :
Surface Mount
Slew Rate :
10V/μs
Min Operating Temperature :
-40 °C
Min Supply Voltage :
2.5 V
Unity Gain BW-Nom :
20000 kHz
Number of Functions :
4
Datasheets
MCP624-E/SL
Introducing Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP624-E/SL from Chip IC,where excellence meets affordability. This product stands out with its Type:General Purpose Amplifier, Operating Temperature:-40°C~125°C, Number of Terminations:14, Bandwidth:20 MHz, Base Part Number:MCP624, Package / Case:14-SOIC (0.154, 3.90mm Width), Number of Channels:4, Number of Pins:14, Mounting Type:Surface Mount, MCP624-E/SL pinout, MCP624-E/SL datasheet PDF, MCP624-E/SL amp .Beyond Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP624-E/SL ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

Microchip Technology MCP624-E/SL


4 Channels 70 mA per Channel 5pA 65 dB Instrumentational OP Amps 0.005μA 2.65, 5.5 V 2.5V~5.5V MCP624 14 Pins 14-SOIC (0.154, 3.90mm Width)

MCP624-E/SL Overview


In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 200μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.5 mA and 10 . Maintain 126dB as the voltage gain. In total, there are 4 circuits on this buffer amplifier. Buffer op amp is equipped with 4 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40 °C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125 °C degrees. As a whole, there are 4 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 2.65, 5.5 V. This electronic part is recommended to be used with an 2.5mA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 5.5 V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5 V when using it. mCal Technology is the number that corresponds to the series of the buffer op amp. A linear amplifier such as this has 4 amplifiers on it.

MCP624-E/SL Features


14 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail


MCP624-E/SL Applications


There are a lot of Microchip Technology
MCP624-E/SL Instrumentational OP Amps applications.


  • Differentiator circuits
  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection
  • Signal amplification
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM