MCP619-I/P
- Mfr.Part #
- MCP619-I/P
- Manufacturer
- Microchip Technology
- Package / Case
- 14-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 14DIP
- Stock
- 7,992
- In Stock :
- 7,992
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Maximum Input Offset Current :
- 0.00015(TYP)@5.5V
- Temperature Grade :
- Industrial
- Seated Height-Max :
- 4.32 mm
- Power Supply Rejection Ratio (PSRR) :
- 86dB
- HTS Code :
- 8542.33.00.01
- Amplifier Type :
- GENERAL PURPOSE
- Height :
- 3.3mm
- Power Supply Rejection Ratio :
- 86(dB)
- Base Product Number :
- MCP619
- Unity Gain BW-Nom :
- 190 kHz
- Voltage Gain in dB :
- 120(dB)
- Product :
- Operational Amplifiers
- RoHS :
- Compliant
- Type :
- General Purpose Amplifier
- JESD-609 Code :
- e3
- Screening Level :
- Industrial
- Voltage Gain :
- 120dB
- Min Operating Temperature :
- -40 °C
- Product Category :
- Operational Amplifiers - Op Amps
- ECCN Code :
- EAR99
- Reach Compliance Code :
- Compliant
- Maximum Operating Temperature :
- + 85 C
- Architecture :
- VOLTAGE-FEEDBACK
- Single Supply Voltage (Max) :
- 5.5(V)
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Single Supply Voltage (Typ) :
- 3/5(V)
- Qualification Status :
- Not Qualified
- Mounting Type :
- Through Hole
- Voltage - Input Offset :
- 150μV
- Pbfree Code :
- yes
- Output Current per Channel :
- 17 mA
- Slew Rate :
- 0.08V/µs
- Product Type :
- Op Amps - Operational Amplifiers
- Package Shape :
- RECTANGULAR
- Input Offset Voltage :
- 0.15(mV)
- Product Status :
- Active
- Package :
- Tube
- Supplier Device Package :
- 14-PDIP
- Low-Offset :
- yes
- Package / Case :
- 14-DIP (0.300, 7.62mm)
- Terminal Pitch :
- 2.54 mm
- Output Current :
- 17mA
- Nominal Supply Current :
- 19μA
- Factory Lead Time :
- 10 Weeks
- Rad Hardened :
- No
- Frequency Compensation :
- yes
- Max Supply Voltage :
- 5.5 V
- Mounting :
- Through Hole
- Minimum Operating Temperature :
- - 40 C
- Number of Circuits :
- 4
- Unity Gain Bandwidth Product :
- 0.19
- Current - Input Bias :
- 15nA
- Number of Functions :
- 4
- Operating Temperature :
- -40°C~85°C
- Mounting Style :
- Through Hole
- Operating Temp Range :
- -40C to 85C
- Lead Free :
- Lead Free
- Schedule B :
- 8542330000, 8542330000/8542330000/8542330000/8542330000/8542330000
- Gain Bandwidth Product :
- 190kHz
- Peak Reflow Temperature (Cel) :
- Not Applicable
- Terminal Form :
- THROUGH-HOLE
- Surface Mount :
- No
- Min Supply Voltage :
- 2.3 V
- Packaging :
- Tube
- Input Bias Current :
- 5(nA)
- Single Supply Voltage (Min) :
- 2.3(V)
- Manufacturer :
- Microchip
- Terminal Position :
- Dual
- Bandwidth :
- 190 kHz
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Common Mode Rejection Ratio :
- 80 dB
- Number of Channels per Chip :
- 4
- Supply Type :
- Single
- Voltage Gain dB :
- 120 dB
- Published :
- 2008
- Number of Pins :
- 14
- Mount :
- Through Hole
- Power Supply Type :
- Single
- Dual Supply Voltage (Min) :
- Not Required(V)
- Radiation Hardening :
- No
- Shut Down Feature :
- No
- Number of Channels :
- 4
- Max Operating Temperature :
- 85 °C
- Series :
- --
- Operating Supply Current :
- 19 uA
- Number of Elements :
- 4
- REACH SVHC :
- No SVHC
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Average Bias Current-Max (IIB) :
- 0.005μA
- Qualification :
- AEC-Q100
- Voltage - Supply, Single/Dual (±) :
- 2.3V~5.5V
- Current - Supply :
- 19μA
- Bias Current-Max (IIB) @25C :
- 0.005μA
- Brand :
- Microchip Technology / Atmel
- Number of Terminations :
- 8
- Operating Temperature Classification :
- Industrial
- Number of Amplifiers :
- 4
- JESD-30 Code :
- R-PDIP-T8
- Supply Voltage :
- 5V
- Maximum Operating Supply Voltage :
- 5.5 V
- Input Offset Voltage (Vos) :
- 150μV
- Power Supply Requirement :
- Single
- Base Part Number :
- MCP619
- Terminal Finish :
- Matte Tin (Sn)
- Rail/Rail I/O Type :
- Rail to Rail Output
- Pin Count :
- 8
- Operating Supply Voltage :
- 16 V
- Shutdown :
- No Shutdown
- Input Offset Voltage-Max :
- 150 µV
- Output Type :
- Rail-to-Rail
- Length :
- 19.05mm
- Current - Output / Channel :
- 17mA
- Supply Current-Max :
- 0.1 mA
- RoHS Status :
- ROHS3 Compliant
- Power Supplies :
- 2.5/5V
- Micropower :
- yes
- Voltage Gain-Min :
- 56200
- Dual Supply Voltage (Max) :
- Not Required(V)
- Shut Down Support :
- No
- Supply Voltage Limit-Max :
- 7V
- Supplier Package :
- PDIP
- Width :
- 6.35mm
- Package Type :
- PDIP
- Number of Terminals :
- 8
- Datasheets
- MCP619-I/P

4 Channels 17 mA per Channel 15nA 80 dB Instrumentational OP Amps 0.005μA 16 V 2.3V~5.5V MCP619 8 Pins 14-DIP (0.300, 7.62mm)
MCP619-I/P Overview
There is a 14-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 14 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 150μV. For this electronic part, it is recommended that you mount it with type Through Hole. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 19 uA . 120dB should be the voltage gain. A linear amplifier like this has 4 circuits on it. Op amp ic has 4 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. In order for this buffer op amp to function, it should have a temperature of at least -40 °C degrees Celsius. At temperatures greater than 85 °C, Instrumentation amplifier should not be used. There are 4 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 16 V. We recommend that you use this electronic part with an 19μA supply in order to get the best performance from it. The electrical part is capable of being powered by a voltage of under 5.5 V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.3 V. The -- represents the op amp's series number. This operational amplifier can conduct a voltage gain of up to 56200 at a minimum. On the linear amplifier, there are 4 amplifiers that are used. A total of 8 terminals are available on this buffer op amp for the connection of wires.
MCP619-I/P Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP619-I/P Applications
There are a lot of Microchip Technology
MCP619-I/P Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















