MCP618-I/MS
- Mfr.Part #
- MCP618-I/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8MSOP
- Stock
- 50
- In Stock :
- 50
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage - Supply, Single/Dual (±) :
- 2.3V~5.5V
- Voltage Gain-Min :
- 56200
- Input Bias Current :
- 5 nA
- Qualification Status :
- Not Qualified
- Low-Bias :
- No
- Mounting Style :
- SMD/SMT
- Output Current :
- 17mA
- Base Product Number :
- MCP618
- Gain Bandwidth Product :
- 190kHz
- Common Mode Rejection Ratio :
- 80 dB
- Supply Voltage Limit-Max :
- 7V
- Height :
- 950μm
- Type :
- General Purpose Amplifier
- Unity Gain BW-Nom :
- 190 kHz
- RoHS :
- Compliant
- Supply Type :
- Single
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Mount :
- Surface Mount
- Mounting :
- Surface Mount
- Number of Channels :
- 1
- Current - Input Bias :
- 15nA
- Number of Elements :
- 1
- Pbfree Code :
- yes
- Peak Reflow Temperature (Cel) :
- 260
- Qualification :
- AEC-Q100
- Terminal Pitch :
- 0.65mm
- Architecture :
- VOLTAGE-FEEDBACK
- Output Type :
- Rail-to-Rail
- ECCN Code :
- EAR99
- Length :
- 3mm
- Power :
- No
- Min Supply Voltage :
- 2.3 V
- Operating Temperature :
- -40°C~85°C
- Manufacturer :
- Microchip
- Max Frequency :
- 1kHz
- Series :
- --
- Mounting Type :
- Surface Mount
- Package :
- Tube
- Current - Output / Channel :
- 17mA
- Input Offset Voltage-Max :
- 150 µV
- Wideband :
- No
- Seated Height-Max :
- 1.1 mm
- Published :
- 2001
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Min Operating Temperature :
- -40 °C
- Number of Circuits :
- 1
- Surface Mount :
- yes
- Slew Rate :
- 0.08V/µs
- REACH SVHC :
- No SVHC
- Max Operating Temperature :
- 85 °C
- Input Offset Voltage (Vos) :
- 150μV
- Brand :
- Microchip Technology
- Number of Amplifiers :
- 1
- Current - Supply :
- 19μA
- Frequency Compensation :
- yes
- Maximum Operating Supply Voltage :
- 5.5 V
- Width :
- 3mm
- Voltage Gain dB :
- 120 dB
- Number of Pins :
- 8
- Max Supply Voltage :
- 5.5 V
- Product :
- Operational Amplifiers
- Package Shape :
- Square
- Bandwidth :
- 190 kHz
- JESD-30 Code :
- S-PDSO-G8
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Amplifier Type :
- GENERAL PURPOSE
- Reach Compliance Code :
- Compliant
- Low-Offset :
- yes
- Supplier Device Package :
- 8-MSOP
- Terminal Finish :
- Matte Tin (Sn)
- Temperature Grade :
- Industrial
- Maximum Operating Temperature :
- + 85 C
- Operating Supply Voltage :
- 5.5 V
- Shut Down Support :
- No
- Product Category :
- Operational Amplifiers - Op Amps
- Supply Voltage :
- 5V
- Number of Terminations :
- 8
- Lead Free :
- Lead Free
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Product Type :
- Op Amps - Operational Amplifiers
- Shutdown :
- No Shutdown
- Factory Lead Time :
- 7 Weeks
- Product Status :
- Active
- JESD-609 Code :
- e3
- Supplier Package :
- MSOP
- Terminal Position :
- Dual
- Packaging :
- Tube
- Voltage - Input Offset :
- 150μV
- Micropower :
- yes
- Radiation Hardening :
- No
- Nominal Supply Current :
- 19μA
- Number of Channels per Chip :
- 1
- Bias Current-Max (IIB) @25C :
- 0.005μA
- Base Part Number :
- MCP618
- Supply Current-Max :
- 0.025 mA
- Number of Terminals :
- 8
- Number of Functions :
- 1
- Pin Count :
- 8
- Power Supplies :
- 2.5/5V
- Average Bias Current-Max (IIB) :
- 0.005μA
- Terminal Form :
- Gull wing
- Voltage Gain :
- 120dB
- Operating Supply Current :
- 19μA
- Power Supply Rejection Ratio (PSRR) :
- 86dB
- Minimum Operating Temperature :
- - 40 C
- Power Supply Type :
- Single
- RoHS Status :
- ROHS3 Compliant
- Screening Level :
- Industrial
- Output Current per Channel :
- 17mA
- HTS Code :
- 8542.33.00.01
- Datasheets
- MCP618-I/MS

1 Channels 17mA per Channel 15nA 80 dB Instrumentational OP Amps 0.005μA 5.5 V 2.3V~5.5V MCP618 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP618-I/MS Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 150μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 19μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 120dB for the time being. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 1 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 85 °C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. There is a recommendation that this electrical part be used with a supply with 19µA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 2.3 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 56200. The buffer amplifier consists of 1 amplifiers. 8 wire terminals are provided on this op amp.
MCP618-I/MS Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP618-I/MS Applications
There are a lot of Microchip Technology
MCP618-I/MS Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















