MCP617-I/SN
- Mfr.Part #
- MCP617-I/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8SOIC
- Stock
- 43,416
- In Stock :
- 43,416
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Base Product Number :
- MCP617
- Low-Offset :
- yes
- Bias Current-Max (IIB) @25C :
- 0.005μA
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Number of Circuits :
- 2
- Unity Gain BW-Nom :
- 190 kHz
- Peak Reflow Temperature (Cel) :
- 260
- Terminal Finish :
- Matte Tin (Sn)
- Mounting Style :
- SMD/SMT
- Factory Lead Time :
- 10 Weeks
- Frequency Compensation :
- yes
- Supply Type :
- Single
- Radiation Hardening :
- No
- Minimum Operating Temperature :
- -40 °C
- Height :
- 1.25mm
- Nominal Supply Current :
- 19μA
- Operating Temp Range :
- -40C to 85C
- Package Type :
- SOIC N
- Base Part Number :
- MCP617
- Maximum Input Offset Current :
- 0.00015(TYP)@5.5V
- Operating Temperature :
- -40°C~85°C
- Pin Count :
- 8
- Voltage Gain in dB :
- 120(dB)
- Series :
- --
- Current - Supply :
- 19μA
- JESD-30 Code :
- R-PDSO-G8
- Number of Elements :
- 2
- Power Supply Rejection Ratio (PSRR) :
- 86dB
- Product :
- Operational Amplifiers
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Average Bias Current-Max (IIB) :
- 0.005μA
- Voltage Gain :
- 120dB
- Single Supply Voltage (Typ) :
- 3/5(V)
- Pbfree Code :
- yes
- HTS Code :
- 8542.33.00.01
- Brand :
- Microchip Technology / Atmel
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Screening Level :
- Industrial
- Input Bias Current :
- 5(nA)
- Power Supply Rejection Ratio :
- 86(dB)
- Current - Input Bias :
- 15nA
- Width :
- 3.9mm
- Input Offset Voltage-Max :
- 150 µV
- Seated Height-Max :
- 1.75 mm
- Package Shape :
- RECTANGULAR
- Mounting Type :
- Surface Mount
- Product Type :
- Op Amps - Operational Amplifiers
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Number of Terminations :
- 8
- Supplier Package :
- SOIC N
- Dual Supply Voltage (Min) :
- Not Required(V)
- Gain Bandwidth Product :
- 190kHz
- Slew Rate :
- 0.08V/µs
- Reach Compliance Code :
- Compliant
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Output Current :
- 17mA
- Dual Supply Voltage (Typ) :
- Not Required(V)
- ECCN Code :
- EAR99
- Surface Mount :
- yes
- Power Supply Type :
- Single
- Published :
- 2008
- Common Mode Rejection Ratio :
- 80 dB
- Number of Amplifiers :
- 2
- RoHS Status :
- ROHS3 Compliant
- JESD-609 Code :
- e3
- Input Offset Voltage :
- 0.15(mV)
- Terminal Position :
- Dual
- Number of Functions :
- 2
- Architecture :
- VOLTAGE-FEEDBACK
- Type :
- General Purpose Amplifier
- Voltage Gain dB :
- 120 dB
- Voltage - Input Offset :
- 150μV
- Rail to Rail :
- Rail to Rail Output
- Supply Voltage Limit-Max :
- 7V
- Power Supplies :
- 2.5/5 V
- Temperature Grade :
- Industrial
- Max Supply Voltage :
- 5.5 V
- Qualification :
- AEC-Q100
- Lead Free :
- Lead Free
- Power Supply Requirement :
- Single
- Product Status :
- Active
- Unity Gain Bandwidth Product :
- 0.19
- REACH SVHC :
- No SVHC
- Rad Hardened :
- No
- Shutdown :
- No Shutdown
- Number of Pins :
- 8
- Amplifier Type :
- GENERAL PURPOSE
- Packaging :
- Tube
- Input Offset Voltage (Vos) :
- 150μV
- Supply Current-Max :
- 0.05 mA
- Operating Temperature Classification :
- Industrial
- Single Supply Voltage (Max) :
- 5.5(V)
- Package :
- Tube
- Min Operating Temperature :
- -40 °C
- RoHS :
- Compliant
- Operating Supply Current :
- 19 uA
- Max Operating Temperature :
- 85 °C
- Mounting :
- Surface Mount
- Output Current per Channel :
- 17 mA
- Number of Terminals :
- 8
- Qualification Status :
- Not Qualified
- Maximum Operating Supply Voltage :
- 5.5 V
- MSL :
- MSL 1 - Unlimited
- Terminal Pitch :
- 1.27 mm
- Maximum Operating Temperature :
- +85 °C
- Length :
- 4.9mm
- Bandwidth :
- 190 kHz
- Number of Channels :
- 2
- Micropower :
- yes
- Supply Voltage :
- 5V
- Operating Supply Voltage :
- 5.5 V
- Min Supply Voltage :
- 2.3 V
- Product Category :
- Operational Amplifiers - Op Amps
- Rail/Rail I/O Type :
- Rail to Rail Output
- Terminal Form :
- Gull wing
- Shut Down Feature :
- No
- Mount :
- Surface Mount
- Voltage Gain-Min :
- 56200
- Dual Supply Voltage (Max) :
- Not Required(V)
- Supplier Device Package :
- 8-SOIC
- Single Supply Voltage (Min) :
- 2.3(V)
- Manufacturer :
- Microchip
- Number of Channels per Chip :
- 2
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Current - Output / Channel :
- 17mA
- Output Type :
- Rail-to-Rail
- Voltage - Supply, Single/Dual (±) :
- 2.3V~5.5V
- Shut Down Support :
- No
- Datasheets
- MCP617-I/SN

2 Channels 17 mA per Channel 15nA 80 dB Instrumentational OP Amps 0.005μA 5.5 V 2.3V~5.5V MCP617 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP617-I/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 150μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 19 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 120dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 85 °C should not be used for the operation of buffer amplifier. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. There is a recommendation that this electrical part be used with a supply with 19μA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 2.3 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 56200. The buffer amplifier consists of 2 amplifiers. 8 wire terminals are provided on this op amp.
MCP617-I/SN Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP617-I/SN Applications
There are a lot of Microchip Technology
MCP617-I/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















