MCP6143T-I/SN
- Mfr.Part #
- MCP6143T-I/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 35,179
- In Stock :
- 35,179
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Elements :
- 1
- Operating Supply Voltage :
- 3.6, 2.7, 3 V
- Maximum Operating Temperature :
- + 85 C
- Slew Rate :
- 0.003V/μs
- Peak Reflow Temperature (Cel) :
- 260
- Micropower :
- yes
- JESD-609 Code :
- e3
- Max Supply Voltage :
- 5.5 V
- Reach Compliance Code :
- Compliant
- Mount :
- Surface Mount
- Pbfree Code :
- yes
- Pin Count :
- 8
- Voltage - Supply, Single/Dual (±) :
- 1.4V~6V
- Current - Input Bias :
- 1pA
- Output Type :
- Rail-to-Rail
- Surface Mount :
- yes
- Package Shape :
- RECTANGULAR
- Frequency Compensation :
- YES (AVCL>=10)
- Radiation Hardening :
- No
- Gain Bandwidth Product :
- 100kHz
- Supplier Device Package :
- 8-SOIC
- Min Supply Voltage :
- 1.4 V
- Power :
- No
- Supply Current-Max :
- 0.001 mA
- Base Part Number :
- MCP6143
- Length :
- 4.9mm
- Number of Channels :
- 1
- Base Product Number :
- MCP6143
- Series :
- --
- Min Operating Temperature :
- -40 °C
- Number of Channels per Chip :
- 1
- Operating Supply Current :
- 600nA
- Minimum Operating Temperature :
- - 40 C
- Temperature Grade :
- Industrial
- Published :
- 2009
- Seated Height-Max :
- 1.75 mm
- Low-Offset :
- No
- Number of Terminals :
- 8
- Terminal Pitch :
- 1.27 mm
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Nominal Supply Current :
- 600nA
- RoHS :
- Compliant
- Terminal Form :
- Gull wing
- Product :
- Operational Amplifiers
- Supply Voltage :
- 5V
- Brand :
- Microchip Technology
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Max Operating Temperature :
- 85 °C
- Mounting Style :
- SMD/SMT
- Product Category :
- Operational Amplifiers - Op Amps
- Qualification :
- AEC-Q100
- Mounting Type :
- Surface Mount
- Mounting :
- Surface Mount
- Lead Free :
- Lead Free
- Voltage Gain dB :
- 115 dB
- Output Current per Channel :
- 20mA
- Programmable Power :
- No
- Type :
- General Purpose Amplifier
- Product Status :
- Active
- Supply Type :
- Single
- Architecture :
- VOLTAGE-FEEDBACK
- Number of Pins :
- 8
- Maximum Operating Supply Voltage :
- 5.5 V
- Product Type :
- Op Amps - Operational Amplifiers
- Voltage Gain-Min :
- 56200
- Input Offset Voltage-Max :
- 3000 µV
- Number of Circuits :
- 1
- Unity Gain BW-Nom :
- 100 kHz
- Operating Temperature :
- -40°C~85°C
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Input Bias Current :
- 1 pA
- Amplifier Type :
- GENERAL PURPOSE
- JESD-30 Code :
- R-PDSO-G8
- Terminal Finish :
- Matte Tin (Sn)
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Low-Bias :
- yes
- Supply Voltage Limit-Max :
- 7V
- HTS Code :
- 8542.33.00.01
- Average Bias Current-Max (IIB) :
- 0.0001 µA
- Number of Terminations :
- 8
- Shutdown :
- No Shutdown
- Number of Functions :
- 1
- Power Supplies :
- 1.5/5 V
- Current - Supply :
- 600nA
- Terminal Position :
- Dual
- Common Mode Rejection Ratio :
- 60 dB
- Height :
- 1.25 mm (Min)
- Screening Level :
- Industrial
- ECCN Code :
- EAR99
- Voltage Gain :
- 115dB
- Current - Output / Channel :
- 20mA
- Width :
- 3.9 mm
- Input Offset Voltage (Vos) :
- 3mV
- Manufacturer :
- Microchip
- Packing Method :
- Tape and Reel
- Output Current :
- 21mA
- RoHS Status :
- ROHS3 Compliant
- Voltage - Input Offset :
- 3mV
- Qualification Status :
- Not Qualified
- Packaging :
- Tape and Reel (TR)
- Factory Lead Time :
- 14 Weeks
- Wideband :
- No
- Package :
- Tape and Reel (TR)
- Supplier Package :
- SOIC N
- Datasheets
- MCP6143T-I/SN

1 Channels 20mA per Channel 1pA 60 dB Instrumentational OP Amps 0.0001 µA 3.6, 2.7, 3 V 1.4V~6V MCP6143 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6143T-I/SN Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 3mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 600nA can be used to operate this linear amplifier. There should be no change in the voltage gain at 115dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85 °C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3.6, 2.7, 3 V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. For optimal performance, this electrical part should be connected to a supply with a current of 600nA. It is important to keep in mind that the power supply voltage of this electric component is below 5.5 V, which is suitable. Keeping the linear amplifier's supply voltage above 1.4 V is recommended. Buffer op amp series numbers are indicated by the --. This op amp ic can conduct a minimum voltage gain of 56200. There are 8 wire terminals on this op amp ic.
MCP6143T-I/SN Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6143T-I/SN Applications
There are a lot of Microchip Technology
MCP6143T-I/SN Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















