MCP6143-I/MS
- Mfr.Part #
- MCP6143-I/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8MSOP
- Stock
- 39,511
- In Stock :
- 39,511
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Max Supply Voltage :
- 5.5 V
- Terminal Form :
- Gull wing
- Supply Voltage :
- 5V
- Lead Free :
- Lead Free
- Terminal Position :
- Dual
- Unity Gain BW-Nom :
- 100 kHz
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Mounting Type :
- Surface Mount
- Base Product Number :
- MCP6143
- Product :
- Operational Amplifiers
- Input Bias Current :
- 1 pA
- Pin Count :
- 8
- Voltage - Input Offset :
- 3mV
- Type :
- General Purpose Amplifier
- HTS Code :
- 8542.33.00.01
- Output Type :
- Rail-to-Rail
- Output Current :
- 21mA
- Architecture :
- VOLTAGE-FEEDBACK
- Shut Down Support :
- No
- Package :
- Tube
- Power :
- No
- Min Operating Temperature :
- -40 °C
- Min Supply Voltage :
- 1.4 V
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Output Current per Channel :
- 20mA
- Number of Functions :
- 1
- ECCN Code :
- EAR99
- Qualification Status :
- Not Qualified
- Power Supplies :
- 1.5/5 V
- Nominal Supply Current :
- 600nA
- Slew Rate :
- 0.003V/μs
- Voltage Gain :
- 115dB
- Low-Bias :
- yes
- Temperature Grade :
- Industrial
- Packaging :
- Tube
- Number of Circuits :
- 1
- Packing Method :
- Tube
- Manufacturer :
- Microchip Technology Inc
- Number of Channels :
- 1
- JESD-30 Code :
- S-PDSO-G8
- Operating Supply Current :
- 600nA
- Common Mode Rejection Ratio :
- 60 dB
- Current - Output / Channel :
- 20mA
- RoHS Status :
- ROHS3 Compliant
- Length :
- 3mm
- Mounting Style :
- SMD/SMT
- Published :
- 2007
- Minimum Operating Temperature :
- - 40 C
- Max Operating Temperature :
- 85 °C
- Power Supply Type :
- Single
- Maximum Operating Temperature :
- + 85 C
- Input Offset Voltage-Max :
- 3000 µV
- Average Bias Current-Max (IIB) :
- 0.0001 µA
- Supplier Device Package :
- 8-MSOP
- RoHS :
- Compliant
- Amplifier Type :
- GENERAL PURPOSE
- Current - Input Bias :
- 1pA
- Number of Pins :
- 8
- Width :
- 3 mm
- Programmable Power :
- No
- Package Shape :
- Square
- Reach Compliance Code :
- Compliant
- Micropower :
- yes
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Operating Supply Voltage :
- 5.5, 3 V
- Supply Current-Max :
- 0.001 mA
- Number of Terminals :
- 8
- Shutdown :
- No Shutdown
- Pbfree Code :
- yes
- Low-Offset :
- No
- JESD-609 Code :
- e3
- Gain Bandwidth Product :
- 100kHz
- Operating Temperature :
- -40°C~85°C
- Maximum Operating Supply Voltage :
- 5.5 V
- Terminal Pitch :
- 0.65mm
- Voltage - Supply, Single/Dual (±) :
- 1.4V~6V
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Number of Channels per Chip :
- 1
- Current - Supply :
- 600nA
- Input Offset Voltage (Vos) :
- 3mV
- Seated Height-Max :
- 1.1 mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Mounting :
- Surface Mount
- Supply Voltage Limit-Max :
- 7V
- Base Part Number :
- MCP6143
- Factory Lead Time :
- 20 Weeks
- Screening Level :
- Industrial
- Frequency Compensation :
- YES (AVCL>=10)
- Series :
- --
- Wideband :
- No
- Number of Terminations :
- 8
- Voltage Gain-Min :
- 56200
- Number of Elements :
- 1
- Terminal Finish :
- Matte Tin (Sn)
- Supplier Package :
- MSOP
- Peak Reflow Temperature (Cel) :
- 260
- Product Status :
- Active
- Mount :
- Surface Mount
- Surface Mount :
- yes
- Product Type :
- Op Amps - Operational Amplifiers
- Datasheets
- MCP6143-I/MS

1 Channels 20mA per Channel 1pA 60 dB Instrumentational OP Amps 0.0001 µA 5.5, 3 V 1.4V~6V MCP6143 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6143-I/MS Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 600nA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 115dB. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. It should only be used at temperatures up above 85 °C. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 5.5, 3 V. The instrumentation amplifier is packed in the form of TUBE. As a recommendation, this electronic component should be used with a power supply that can deliver 600nA. I would like to point out that this electrical component is capable of working from a voltage below 5.5 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 1.4 V at all times. The -- indicates the series number of the op amp. There is a minimum voltage gain of 56200 that this buffer op amp is capable of conducting. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
MCP6143-I/MS Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6143-I/MS Applications
There are a lot of Microchip Technology
MCP6143-I/MS Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















