MCP6141T-E/SN
- Mfr.Part #
- MCP6141T-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 4,048
- In Stock :
- 4,048
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Product Category :
- Operational Amplifiers - Op Amps
- Voltage - Supply, Single/Dual (±) :
- 1.4V~6V
- Manufacturer :
- Microchip
- Mount :
- Surface Mount
- Operating Supply Current :
- 600 nA
- Current - Supply :
- 600nA
- Programmable Power :
- No
- Gain Bandwidth Product :
- 100kHz
- Max Operating Temperature :
- 125 °C
- Maximum Operating Supply Voltage :
- 5.5 V
- Minimum Operating Temperature :
- - 40 C
- Mounting Style :
- SMD/SMT
- Supply Voltage :
- 5V
- Product Type :
- Op Amps - Operational Amplifiers
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Channels :
- 1
- Width :
- 3.9 mm
- Output Current per Channel :
- 21 mA
- Number of Pins :
- 8
- Common Mode Rejection Ratio :
- 60 dB
- Mounting Type :
- Surface Mount
- Factory Lead Time :
- 9 Weeks
- Max Supply Voltage :
- 5.5 V
- Amplifier Type :
- GENERAL PURPOSE
- Number of Circuits :
- 1
- Product Status :
- Active
- Height :
- 1.25 mm
- Voltage Gain dB :
- 115 dB
- Current - Input Bias :
- 1pA
- Mounting :
- Surface Mount
- Number of Channels per Chip :
- 1
- Voltage - Input Offset :
- 3 mV
- Pbfree Code :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Output Current :
- 21mA
- Unity Gain BW-Nom :
- 100 kHz
- Supply Voltage Limit-Max :
- 7V
- RoHS Status :
- Non-RoHS Compliant
- Supply Type :
- Single
- Slew Rate :
- 0.003V/μs
- Operating Temperature :
- -40°C~125°C
- Screening Level :
- Extended Industrial
- Brand :
- Microchip Technology
- Length :
- 4.9mm
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Qualification :
- AEC-Q100
- Pin Count :
- 8
- Supplier Device Package :
- 8-SOIC
- RoHS :
- Compliant
- Base Product Number :
- MCP6141
- Series :
- MCP6141
- Input Bias Current :
- 100 pA
- Product :
- Operational Amplifiers
- Terminal Finish :
- Matte Tin (Sn)
- Base Part Number :
- MCP6141
- Terminal Position :
- Dual
- Min Supply Voltage :
- 1.4 V
- Output Type :
- Rail-to-Rail
- Voltage Gain :
- 115dB
- Radiation Hardening :
- No
- Low-Bias :
- yes
- Packaging :
- Tape and Reel (TR)
- Average Bias Current-Max (IIB) :
- 0.005μA
- Number of Elements :
- 1
- Type :
- General Purpose Amplifier
- Shutdown :
- No Shutdown
- JESD-609 Code :
- e3
- Published :
- 2007
- Wideband :
- No
- ECCN Code :
- EAR99
- Input Offset Voltage (Vos) :
- 3mV
- Number of Terminations :
- 8
- Number of Functions :
- 1
- Min Operating Temperature :
- -40 °C
- Peak Reflow Temperature (Cel) :
- 260
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Terminal Form :
- Gull wing
- Maximum Operating Temperature :
- + 125 C
- Nominal Supply Current :
- 600nA
- Operating Supply Voltage :
- 1.5 V
- Packing Method :
- Tape and Reel
- Lead Free :
- Contains Lead
- Current - Output / Channel :
- 20 mA
- Supplier Package :
- SOIC N
- Low-Offset :
- No
- Micropower :
- yes
- Datasheets
- MCP6141T-E/SN

1 Channels 21 mA per Channel 1pA 60 dB Instrumentational OP Amps 0.005μA 1.5 V 1.4V~6V MCP6141 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6141T-E/SN Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 3mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 600 nA and 10 . 115dB should remain the voltage gain. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40 °C degrees Fahrenheit at any time. Instrumentation amplifier shouldn't be used above 125 °C . For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of the buffer op amp is rated at 1.5 V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. This electronic part is recommended to be used with an 600nA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 5.5 V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 1.4 V when using it. MCP6141 is the number that corresponds to the series of the buffer op amp.
MCP6141T-E/SN Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6141T-E/SN Applications
There are a lot of Microchip Technology
MCP6141T-E/SN Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















