MCP608-I/ST

Share

Or copy the link below:

Mfr.Part #
MCP608-I/ST
Manufacturer
Microchip Technology
Package / Case
8-TSSOP (0.173, 4.40mm Width)
Datasheet
Download
Description
IC OPAMP GP 1 CIRCUIT 8TSSOP
Stock
32,293
In Stock :
32,293

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Microchip Technology
Product Category :
Instrumentation, OP Amps, Buffer Amps
Bandwidth :
155 kHz
Output Type :
Rail-to-Rail
Product Status :
Active
Published :
2009
Factory Lead Time :
10 Weeks
Input Offset Voltage-Max :
250 µV
Min Supply Voltage :
2.5 V
Qualification :
AEC-Q100
Reach Compliance Code :
Compliant
Mounting Style :
SMD/SMT
Architecture :
VOLTAGE-FEEDBACK
Unity Gain BW-Nom :
155 kHz
Package Shape :
RECTANGULAR
Terminal Finish :
Matte Tin (Sn)
Voltage - Supply, Single/Dual (±) :
2.5V~6V
Base Part Number :
MCP608
Output Current :
17mA
Manufacturer :
Microchip
Width :
4.4mm
RoHS :
Compliant
JESD-609 Code :
e3
Number of Terminals :
8
Supply Voltage Limit-Max :
7V
Product Category :
Operational Amplifiers - Op Amps
Base Product Number :
MCP608
Power Supplies :
3/5V
Type :
General Purpose Amplifier
Maximum Operating Temperature :
+ 85 C
Nominal Supply Current :
25μA
Slew Rate :
0.08V/µs
Supplier Device Package :
8-TSSOP
Screening Level :
Industrial
ECCN Code :
EAR99
Power Supply Rejection Ratio (PSRR) :
80dB
Number of Terminations :
8
Gain Bandwidth Product :
155 kHz
Mounting Type :
Surface Mount
Power :
No
Terminal Form :
Gull wing
Supply Type :
Single
Length :
3mm
Terminal Position :
Dual
Input Offset Voltage (Vos) :
250μV
Micropower :
yes
Lifecycle Status :
Production (Last Updated: 2 years ago)
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Common Mode Rejection Ratio :
75 dB
Operating Supply Current :
18.7μA
Min Operating Temperature :
-40 °C
Input Bias Current :
1 pA
Mount :
Surface Mount
Max Operating Temperature :
85 °C
Maximum Operating Supply Voltage :
6 V
Number of Amplifiers :
1
Mounting :
Surface Mount
Pbfree Code :
yes
RoHS Status :
ROHS3 Compliant
HTS Code :
8542.33.00.01
Number of Channels per Chip :
1
Low-Bias :
yes
Package :
Tube
Power Supply Type :
Single
Package / Case :
8-TSSOP (0.173, 4.40mm Width)
Voltage Gain dB :
121 dB
Frequency Compensation :
yes
Supply Voltage :
5V
Output Current per Channel :
17mA
Number of Functions :
1
Operating Temperature :
-40°C~85°C
Brand :
Microchip Technology
Time@Peak Reflow Temperature-Max (s) :
40
Series :
--
REACH SVHC :
No SVHC
Number of Elements :
1
Shut Down Support :
No
Terminal Pitch :
0.65mm
Current - Output / Channel :
17mA
Peak Reflow Temperature (Cel) :
260
Product :
Operational Amplifiers
Temperature Grade :
Industrial
Pin Count :
8
Radiation Hardening :
No
Product Type :
Op Amps - Operational Amplifiers
Packaging :
Tube
Number of Channels :
1
Minimum Operating Temperature :
- 40 C
Voltage Gain-Min :
100000
Qualification Status :
Not Qualified
Max Supply Voltage :
6 V
Supplier Package :
TSSOP
Number of Circuits :
1
Amplifier Type :
GENERAL PURPOSE
Voltage Gain :
121dB
Shutdown :
No Shutdown
Current - Supply :
18.7μA
Number of Pins :
8
Lead Free :
Lead Free
Programmable Power :
No
JESD-30 Code :
R-PDSO-G8
Surface Mount :
yes
Height :
1mm
Supply Current-Max :
0.025 mA
Low-Offset :
yes
Voltage - Input Offset :
250μV
Operating Supply Voltage :
5.5V
Seated Height-Max :
1.2 mm
Current - Input Bias :
1pA
Wideband :
No
Average Bias Current-Max (IIB) :
0.00008 µA
Datasheets
MCP608-I/ST
Introducing Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP608-I/ST from Chip IC,where excellence meets affordability. This product stands out with its Bandwidth:155 kHz, Base Part Number:MCP608, Type:General Purpose Amplifier, Number of Terminations:8, Mounting Type:Surface Mount, Package / Case:8-TSSOP (0.173, 4.40mm Width), Operating Temperature:-40°C~85°C, Number of Channels:1, Number of Pins:8, MCP608-I/ST pinout, MCP608-I/ST datasheet PDF, MCP608-I/ST amp .Beyond Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP608-I/ST ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

Microchip Technology MCP608-I/ST


1 Channels 17mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00008 µA 5.5V 2.5V~6V MCP608 8 Pins 8-TSSOP (0.173, 4.40mm Width)

MCP608-I/ST Overview


It is packaged in an 8-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 250μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 18.7μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 121dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85 °C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. For optimal performance, this electrical part should be connected to a supply with a current of 18.7µA. It is important to keep in mind that the power supply voltage of this electric component is below 6 V, which is suitable. Keeping the linear amplifier's supply voltage above 2.5 V is recommended. Buffer op amp series numbers are indicated by the --. This op amp ic can conduct a minimum voltage gain of 100000. The linear amplifier has 1 amplifiers. There are 8 wire terminals on this op amp ic.

MCP608-I/ST Features


8 Pins
supply voltage of 5V
121dB voltage gain
Output Type: Rail-to-Rail
8Terminations


MCP608-I/ST Applications


There are a lot of Microchip Technology
MCP608-I/ST Instrumentational OP Amps applications.


  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection
  • Signal amplification
  • Signal filtering
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM