MCP607-I/P
- Mfr.Part #
- MCP607-I/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8DIP
- Stock
- 20,609
- In Stock :
- 20,609
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Operating Temperature :
- -40°C~85°C
- Input Offset Voltage-Max :
- 250 µV
- Single Supply Voltage (Typ) :
- 3/5(V)
- MSL :
- -
- Number of Terminals :
- 8
- Base Product Number :
- MCP607
- Current - Input Bias :
- 1pA
- Frequency Compensation :
- yes
- REACH SVHC :
- No SVHC
- Temperature Grade :
- Industrial
- Terminal Pitch :
- 2.54 mm
- Supply Type :
- Single
- Mounting :
- Through Hole
- Radiation Hardening :
- No
- Supply Current-Max :
- 0.05 mA
- Mount :
- Through Hole
- Single Supply Voltage (Max) :
- 6(V)
- Series :
- --
- Shutdown :
- No Shutdown
- Input Voltage Range :
- 2.5 → 6 V
- Micropower :
- yes
- Terminal Position :
- Dual
- HTS Code :
- 8542.33.00.01
- Qualification Status :
- Not Qualified
- RoHS :
- Compliant
- Min Operating Temperature :
- -40 °C
- Surface Mount :
- No
- Terminal Form :
- THROUGH-HOLE
- Product :
- Operational Amplifiers
- Average Bias Current-Max (IIB) :
- 0.00008 µA
- Package :
- Tube
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Nominal Supply Current :
- 25μA
- Voltage Gain :
- 121dB
- Maximum Operating Temperature :
- +85 °C
- Current - Output / Channel :
- 17mA
- Supplier Package :
- PDIP
- Low-Bias :
- yes
- Supply Voltage Limit-Max :
- 7V
- Peak Reflow Temperature (Cel) :
- NOT SPECIFIED
- Package Shape :
- RECTANGULAR
- Amplifier Type :
- GENERAL PURPOSE
- Output Type :
- Rail-to-Rail
- Reach Compliance Code :
- Compliant
- Power Supplies :
- 2.5/5.5 V
- Pin Count :
- 8
- Mounting Style :
- Through Hole
- Supply Voltage :
- 5V
- Number of Elements :
- 2
- Low-Offset :
- yes
- Gain Bandwidth Product :
- 155kHz
- Voltage - Supply, Single/Dual (±) :
- 2.5V~6V
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Output Current per Channel :
- 17mA
- Factory Lead Time :
- 6 Weeks
- Rad Hardened :
- No
- Unity Gain Bandwidth Product :
- 0.155
- Power Supply Rejection Ratio :
- 80(dB)
- Brand :
- Microchip Technology / Atmel
- Voltage Gain in dB :
- 121(dB)
- Min Supply Voltage :
- 2.5 V
- Input Offset Voltage (Vos) :
- 250μV
- Length :
- 10.16mm
- Base Part Number :
- MCP607
- Seated Height-Max :
- 5.33 mm
- Output Current :
- 17mA
- Minimum Operating Temperature :
- -40 °C
- Unity Gain BW-Nom :
- 155 kHz
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Maximum Input Voltage :
- 6 V
- Max Frequency :
- 1kHz
- Power Supply Type :
- Single
- RoHS Status :
- ROHS3 Compliant
- Rail/Rail I/O Type :
- Rail to Rail Output
- Product Category :
- Operational Amplifiers - Op Amps
- Number of Functions :
- 2
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Number of Circuits :
- 2
- Pbfree Code :
- yes
- Number of Channels per Chip :
- 2
- Qualification :
- AEC-Q100
- Single Supply Voltage (Min) :
- 2.5(V)
- Current - Supply :
- 18.7μA
- JESD-30 Code :
- R-PDIP-T8
- Number of Channels :
- 2
- Common Mode Rejection Ratio :
- 75 dB
- Max Operating Temperature :
- 85 °C
- Published :
- 2000
- Maximum Operating Supply Voltage :
- 6 V
- Width :
- 7.112mm
- Dual Supply Voltage (Min) :
- Not Required(V)
- Number of Terminations :
- 8
- Manufacturer :
- Microchip
- JESD-609 Code :
- e3
- Max Input Voltage :
- 6V
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Height :
- 4.953mm
- Dual Supply Voltage (Max) :
- Not Required(V)
- Operating Temperature Classification :
- Industrial
- Number of Pins :
- 8
- Supplier Device Package :
- 8-PDIP
- Architecture :
- VOLTAGE-FEEDBACK
- Lead Free :
- Lead Free
- ECCN Code :
- EAR99
- Voltage - Input Offset :
- 250μV
- Type :
- General Purpose Amplifier
- Product Type :
- Op Amps - Operational Amplifiers
- Mounting Type :
- Through Hole
- Screening Level :
- Industrial
- Terminal Finish :
- Matte Tin (Sn)
- Operating Supply Voltage :
- 5.5V
- Number of Amplifiers :
- 2
- Slew Rate :
- 0.08V/µs
- Bandwidth :
- 155 kHz
- Shut Down Feature :
- No
- Input Offset Voltage :
- 0.25(mV)
- Package Type :
- PDIP
- Power Supply Requirement :
- Single
- Max Supply Voltage :
- 6 V
- Rail to Rail :
- Rail to Rail Output
- Voltage Gain-Min :
- 100000
- Shut Down Support :
- No
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Voltage Gain dB :
- 121 dB
- Dimensions :
- 9.27 x 6.35 x 3.3mm
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Input Bias Current :
- 1 pA
- Packaging :
- Tube
- Operating Supply Current :
- 18.7μA
- Product Status :
- Active
- Min Input Voltage :
- 2.5V
- Operating Temp Range :
- -40C to 85C
- Datasheets
- MCP607-I/P

2 Channels 17mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00008 µA 5.5V 2.5V~6V MCP607 8 Pins 8-DIP (0.300, 7.62mm)
MCP607-I/P Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 250μV. For this electronic part, it is recommended that you mount it with type Through Hole. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 18.7μA . 121dB should be the voltage gain. A linear amplifier like this has 2 circuits on it. Op amp ic has 2 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. In order for this buffer op amp to function, it should have a temperature of at least -40 °C degrees Celsius. At temperatures greater than 85 °C, Instrumentation amplifier should not be used. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. We recommend that you use this electronic part with an 18.7µA supply in order to get the best performance from it. The electrical part is capable of being powered by a voltage of under 6 V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.5 V. The -- represents the op amp's series number. This operational amplifier can conduct a voltage gain of up to 100000 at a minimum. On the linear amplifier, there are 2 amplifiers that are used. A total of 8 terminals are available on this buffer op amp for the connection of wires.
MCP607-I/P Features
8 Pins
supply voltage of 5V
121dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP607-I/P Applications
There are a lot of Microchip Technology
MCP607-I/P Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















