MCP6061T-E/MNY
- Mfr.Part #
- MCP6061T-E/MNY
- Manufacturer
- Microchip Technology
- Package / Case
- 8-WFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8TDFN
- Stock
- 10,161
- In Stock :
- 10,161
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Product Status :
- Active
- Surface Mount :
- yes
- Seated Height-Max :
- 0.8 mm
- Published :
- 2009
- Supply Voltage Limit-Max :
- 7V
- Pin Count :
- 8
- Voltage Gain dB :
- 115 dB
- RoHS :
- Details
- Screening Level :
- Extended
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Slew Rate :
- 0.25V/µs
- Input Offset Voltage (Vos) :
- 150μV
- Peak Reflow Temperature (Cel) :
- 260
- Current - Input Bias :
- 1pA
- Low-Offset :
- yes
- Shutdown :
- No Shutdown
- Voltage Gain :
- 115dB
- Voltage Gain-Min :
- 56200
- Width :
- 3mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Supply Current-Max :
- 0.09 mA
- Unity Gain BW-Nom :
- 730 kHz
- Common Mode Rejection Ratio :
- 72 dB
- JESD-30 Code :
- R-PDSO-N8
- Average Bias Current-Max (IIB) :
- 0.005μA
- Temperature Grade :
- Automotive
- Power Supplies :
- 2/5V
- Nominal Supply Current :
- 60μA
- Number of Pins :
- 8
- Mounting Style :
- SMD/SMT
- Mounting Type :
- Surface Mount
- Maximum Operating Supply Voltage :
- 6 V
- Number of Functions :
- 1
- Frequency Compensation :
- yes
- Operating Supply Voltage :
- 4.5, 42 V
- HTS Code :
- 8542.33.00.01
- Series :
- --
- Radiation Hardening :
- No
- Number of Terminations :
- 8
- Supply Voltage :
- 3V
- Minimum Operating Temperature :
- - 40 C
- Terminal Form :
- NO LEAD
- Qualification :
- AEC-Q100
- Height :
- 730μm
- Base Product Number :
- MCP6061
- Terminal Pitch :
- 0.5mm
- Supply Type :
- Single
- Output Current :
- 27mA
- Mount :
- Surface Mount
- Reach Compliance Code :
- Compliant
- Output Current per Channel :
- 27 mA
- Programmable Power :
- No
- Wideband :
- No
- JESD-609 Code :
- e4
- Supplier Device Package :
- 8-TDFN (2x3)
- Mounting :
- Surface Mount
- Operating Temperature :
- -40°C~125°C
- Number of Channels :
- 1
- Bias Current-Max (IIB) @25C :
- 0.0001 µA
- Length :
- 2mm
- Base Part Number :
- MCP6061
- Architecture :
- VOLTAGE-FEEDBACK
- Low-Bias :
- yes
- Micropower :
- yes
- Product :
- Precision Amplifiers
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Terminal Position :
- Dual
- RoHS Status :
- ROHS3 Compliant
- Qualification Status :
- Not Qualified
- Pbfree Code :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Manufacturer :
- Microchip
- Product Type :
- Precision Amplifiers
- Lead Free :
- Lead Free
- Input Offset Voltage-Max :
- 150 µV
- Factory Lead Time :
- 22 Weeks
- Gain Bandwidth Product :
- 730kHz
- ECCN Code :
- EAR99
- Bandwidth :
- 730 kHz
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Product Category :
- Precision Amplifiers
- Operating Supply Current :
- 60 uA
- Maximum Operating Temperature :
- + 125 C
- Packing Method :
- Tape and Reel
- Package / Case :
- 8-WFDFN Exposed Pad
- Package Shape :
- RECTANGULAR
- Number of Terminals :
- 8
- Number of Circuits :
- 1
- Output Type :
- Rail-to-Rail
- Brand :
- Microchip Technology
- Type :
- General Purpose Amplifier
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Current - Supply :
- 60μA
- Power :
- No
- REACH SVHC :
- No SVHC
- Packaging :
- Tape and Reel (TR)
- Supplier Package :
- TDFN EP
- Voltage - Input Offset :
- 150μV
- Number of Channels per Chip :
- 1
- Datasheets
- MCP6061T-E/MNY

1 Channels 27 mA per Channel 1pA 72 dB Instrumentational OP Amps 0.005μA 4.5, 42 V 1.8V~6V MCP6061 8 Pins 8-WFDFN Exposed Pad
MCP6061T-E/MNY Overview
It is packaged in an 8-WFDFN Exposed Pad-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 150μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 60 uA can be used to operate this linear amplifier. There should be no change in the voltage gain at 115dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 4.5, 42 V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. For optimal performance, this electrical part should be connected to a supply with a current of 60μA. Buffer op amp series numbers are indicated by the --. This op amp ic can conduct a minimum voltage gain of 56200. There are 8 wire terminals on this op amp ic.
MCP6061T-E/MNY Features
8 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6061T-E/MNY Applications
There are a lot of Microchip Technology
MCP6061T-E/MNY Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















