MCP606-I/ST
- Mfr.Part #
- MCP606-I/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8TSSOP
- Stock
- 85
- In Stock :
- 85
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Number of Elements :
- 1
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Gain Bandwidth Product :
- 155 kHz
- Pbfree Code :
- yes
- Input Offset Voltage (Vos) :
- 250μV
- Length :
- 3mm
- Supply Voltage Limit-Max :
- 7V
- Temperature Grade :
- Industrial
- Height :
- 1mm
- Mounting :
- Surface Mount
- Base Product Number :
- MCP606
- Package :
- Tube
- Terminal Finish :
- Matte Tin (Sn)
- Number of Amplifiers :
- 1
- Max Operating Temperature :
- 85 °C
- Voltage - Input Offset :
- 250μV
- Reach Compliance Code :
- Compliant
- Supply Voltage :
- 5V
- Published :
- 2003
- Common Mode Rejection Ratio :
- 75 dB
- Packaging :
- Tube
- Surface Mount :
- yes
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Width :
- 4.4mm
- Series :
- --
- Mounting Style :
- SMD/SMT
- Maximum Operating Supply Voltage :
- 6 V
- Package Shape :
- RECTANGULAR
- Type :
- General Purpose Amplifier
- Terminal Pitch :
- 0.65mm
- Min Operating Temperature :
- -40 °C
- Radiation Hardening :
- No
- Mount :
- Surface Mount
- Supplier Package :
- TSSOP
- Current - Supply :
- 18.7μA
- Number of Circuits :
- 1
- Bandwidth :
- 155 kHz
- Screening Level :
- Industrial
- Voltage - Supply, Single/Dual (±) :
- 2.5V~6V
- Power Supply Type :
- Single
- ECCN Code :
- EAR99
- Number of Terminals :
- 8
- Min Supply Voltage :
- 2.5 V
- Operating Supply Voltage :
- 5.5V
- Voltage Gain-Min :
- 100000
- Power :
- No
- Manufacturer :
- Microchip Technology Inc
- Micropower :
- yes
- Lead Free :
- Lead Free
- Maximum Operating Temperature :
- + 85 C
- Shutdown :
- No Shutdown
- Nominal Supply Current :
- 25μA
- Slew Rate :
- 0.08V/µs
- Input Offset Voltage-Max :
- 250 µV
- JESD-30 Code :
- R-PDSO-G8
- Product Type :
- Op Amps - Operational Amplifiers
- Supplier Device Package :
- 8-TSSOP
- Programmable Power :
- No
- Base Part Number :
- MCP606
- Low-Bias :
- yes
- Wideband :
- No
- Output Current :
- 17mA
- Product :
- Operational Amplifiers
- Average Bias Current-Max (IIB) :
- 0.00008 µA
- Number of Pins :
- 8
- Terminal Position :
- Dual
- Low-Offset :
- yes
- Operating Supply Current :
- 18.7 uA
- Supply Current-Max :
- 0.025 mA
- Number of Channels :
- 1
- Unity Gain BW-Nom :
- 155 kHz
- Number of Terminations :
- 8
- Qualification Status :
- Not Qualified
- Input Bias Current :
- 80 pA
- Architecture :
- VOLTAGE-FEEDBACK
- Shut Down Support :
- No
- Current - Output / Channel :
- 17mA
- REACH SVHC :
- No SVHC
- Peak Reflow Temperature (Cel) :
- 260
- Terminal Form :
- Gull wing
- RoHS Status :
- ROHS3 Compliant
- Number of Functions :
- 1
- Minimum Operating Temperature :
- - 40 C
- Package / Case :
- 8-TSSOP (0.173, 4.40mm Width)
- Max Supply Voltage :
- 6 V
- Output Type :
- Rail-to-Rail
- Seated Height-Max :
- 1.2 mm
- Operating Temperature :
- -40°C~85°C
- Current - Input Bias :
- 1pA
- JESD-609 Code :
- e3
- Amplifier Type :
- GENERAL PURPOSE
- Output Current per Channel :
- 17 mA
- Voltage Gain :
- 121dB
- HTS Code :
- 8542.33.00.01
- Power Supplies :
- 3/5V
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Number of Channels per Chip :
- 1
- RoHS :
- Compliant
- Frequency Compensation :
- yes
- Factory Lead Time :
- 12 Weeks
- Pin Count :
- 8
- Mounting Type :
- Surface Mount
- Product Status :
- Active
- Datasheets
- MCP606-I/ST
1 Channels 17 mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00008 µA 5.5V 2.5V~6V MCP606 8 Pins 8-TSSOP (0.173, 4.40mm Width)
MCP606-I/ST Overview
In order to protect the op amps, a 8-TSSOP (0.173, 4.40mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 250μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 18.7 uA and 10 . Maintain 121dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40 °C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 85 °C degrees. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. This electronic part is recommended to be used with an 18.7μA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 6 V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5 V when using it. -- is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 100000 is the minimum voltage gain that this instrumentation amplifier is capable of producing. A linear amplifier such as this has 1 amplifiers on it. As part of this op amp ic, there are 8 terminals on which wires can be connected.
MCP606-I/ST Features
8 Pins
supply voltage of 5V
121dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP606-I/ST Applications
There are a lot of Microchip Technology
MCP606-I/ST Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















