MCP606-I/SN
- Mfr.Part #
- MCP606-I/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 2
- In Stock :
- 2
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- HTS Code :
- 8542.33.00.01
- Radiation Hardening :
- No
- Pin Count :
- 8
- JESD-609 Code :
- e3
- Single Supply Voltage (Typ) :
- 3/5(V)
- REACH SVHC :
- No SVHC
- Nominal Supply Current :
- 25μA
- Product :
- Operational Amplifiers
- Number of Circuits :
- 1
- Average Bias Current-Max (IIB) :
- 0.00008 µA
- Supplier Package :
- SOIC N
- Operating Supply Current :
- 25 uA
- Height :
- 1.2446mm
- Supply Type :
- Single
- Peak Reflow Temperature (Cel) :
- 260
- ECCN Code :
- EAR99
- Voltage - Input Offset :
- 250μV
- Supply Current-Max :
- 0.025 mA
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Operating Temperature :
- -40°C~85°C
- Number of Amplifiers :
- 1
- Package Shape :
- RECTANGULAR
- Temperature Grade :
- Industrial
- JESD-30 Code :
- R-PDSO-G8
- Output Current per Channel :
- 17 mA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Max Input Voltage :
- 6V
- Type :
- General Purpose Amplifier
- Power Supply Rejection Ratio :
- 80(dB)
- Voltage Gain-Min :
- 100000
- Input Bias Current :
- 80 pA
- Frequency Compensation :
- yes
- Rail to Rail :
- Rail to Rail Output
- Architecture :
- VOLTAGE-FEEDBACK
- Min Supply Voltage :
- 2.5 V
- RoHS :
- Compliant
- Low-Offset :
- yes
- Terminal Finish :
- Matte Tin (Sn)
- Supply Voltage Limit-Max :
- 7V
- Qualification :
- AEC-Q100
- Product Status :
- Active
- Mounting Type :
- Surface Mount
- Number of Terminals :
- 8
- Series :
- --
- Mount :
- Surface Mount
- Unity Gain Bandwidth Product :
- 0.155
- Package :
- Tube
- Package Type :
- SOIC N
- Input Offset Voltage (Vos) :
- 250μV
- Published :
- 2003
- Low-Bias :
- yes
- Width :
- 3.9116mm
- Shut Down Feature :
- No
- Gain Bandwidth Product :
- 155 kHz
- Bandwidth :
- 155 kHz
- Micropower :
- yes
- Common Mode Rejection Ratio :
- 75 dB
- Operating Supply Voltage :
- 5.5V
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Pbfree Code :
- yes
- Dual Supply Voltage (Min) :
- Not Required(V)
- Maximum Input Voltage :
- 6 V
- Shutdown :
- No Shutdown
- Min Operating Temperature :
- -40 °C
- Current - Supply :
- 18.7μA
- Max Operating Temperature :
- 85 °C
- Operating Temp Range :
- -40C to 85C
- MSL :
- MSL 1 - Unlimited
- Supply Voltage :
- 5V
- Supplier Device Package :
- 8-SOIC
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Lead Free :
- Lead Free
- Length :
- 4.8768mm
- Voltage Gain :
- 121dB
- Input Offset Voltage-Max :
- 250 µV
- Amplifier Type :
- GENERAL PURPOSE
- RoHS Status :
- ROHS3 Compliant
- Maximum Operating Supply Voltage :
- 6 V
- Output Type :
- Rail-to-Rail
- Rad Hardened :
- No
- Number of Terminations :
- 8
- Unity Gain BW-Nom :
- 155 kHz
- Number of Channels per Chip :
- 1
- Minimum Operating Temperature :
- -40 °C
- Factory Lead Time :
- 8 Weeks
- Voltage Gain in dB :
- 121(dB)
- Input Offset Voltage :
- 0.25(mV)
- Programmable Power :
- No
- Power Supply Type :
- Single
- Power :
- No
- Single Supply Voltage (Max) :
- 6(V)
- Terminal Pitch :
- 1.27 mm
- Surface Mount :
- yes
- Number of Functions :
- 1
- Operating Temperature Classification :
- Industrial
- Max Supply Voltage :
- 6 V
- Base Product Number :
- MCP606
- Number of Pins :
- 8
- Number of Channels :
- 1
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Reach Compliance Code :
- Compliant
- Number of Elements :
- 1
- Slew Rate :
- 0.08V/µs
- Maximum Operating Temperature :
- +85 °C
- Product Type :
- Op Amps - Operational Amplifiers
- Product Category :
- Operational Amplifiers - Op Amps
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Voltage Gain dB :
- 121 dB
- Power Supplies :
- 3/5V
- Output Current :
- 17mA
- Brand :
- Microchip Technology / Atmel
- Input Voltage Range :
- 2.5 → 6 V
- Current - Input Bias :
- 1pA
- Qualification Status :
- Not Qualified
- Max Frequency :
- 1kHz
- Wideband :
- No
- Single Supply Voltage (Min) :
- 2.5(V)
- Min Input Voltage :
- 2.5V
- Seated Height-Max :
- 1.75 mm
- Terminal Form :
- Gull wing
- Mounting Style :
- SMD/SMT
- Mounting :
- Surface Mount
- Screening Level :
- Industrial
- Current - Output / Channel :
- 17mA
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Dual Supply Voltage (Max) :
- Not Required(V)
- Shut Down Support :
- No
- Terminal Position :
- Dual
- Power Supply Requirement :
- Single
- Voltage - Supply, Single/Dual (±) :
- 2.5V~6V
- Base Part Number :
- MCP606
- Packaging :
- Tube
- Rail/Rail I/O Type :
- Rail to Rail Output
- Manufacturer :
- Microchip
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Datasheets
- MCP606-I/SN

1 Channels 17 mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00008 µA 5.5V 2.5V~6V MCP606 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP606-I/SN Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 250μV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 25 uA . 121dB should be the voltage gain. A linear amplifier like this has 1 circuits on it. Op amp ic has 1 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. In order for this buffer op amp to function, it should have a temperature of at least -40 °C degrees Celsius. At temperatures greater than 85 °C, Instrumentation amplifier should not be used. There are 1 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. We recommend that you use this electronic part with an 18.7μA supply in order to get the best performance from it. The electrical part is capable of being powered by a voltage of under 6 V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.5 V. The -- represents the op amp's series number. This operational amplifier can conduct a voltage gain of up to 100000 at a minimum. On the linear amplifier, there are 1 amplifiers that are used. A total of 8 terminals are available on this buffer op amp for the connection of wires.
MCP606-I/SN Features
8 Pins
supply voltage of 5V
121dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP606-I/SN Applications
There are a lot of Microchip Technology
MCP606-I/SN Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















