MCP604-I/ST
- Mfr.Part #
- MCP604-I/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 14-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 14TSSOP
- Stock
- 8,887
- In Stock :
- 8,887
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Manufacturer :
- Microchip
- Supply Voltage Limit-Max :
- 7V
- Reach Compliance Code :
- Compliant
- Base Part Number :
- MCP604
- Qualification Status :
- Not Qualified
- Number of Circuits :
- 4
- Published :
- 2000
- Package Shape :
- RECTANGULAR
- Package / Case :
- 14-TSSOP (0.173, 4.40mm Width)
- JESD-30 Code :
- R-PDSO-G14
- Shut Down Support :
- No
- Voltage Gain-Min :
- 56200
- Operating Supply Current :
- 23 uA
- Height :
- 0.9 mm
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V
- Height Seated (Max) :
- 1.1mm
- Nominal Supply Current :
- 230μA
- Terminal Position :
- Dual
- Mounting Type :
- Surface Mount
- Number of Functions :
- 4
- Temperature Grade :
- Industrial
- Unity Gain BW-Nom :
- 2800 kHz
- Architecture :
- VOLTAGE-FEEDBACK
- Product :
- Operational Amplifiers
- Voltage Gain :
- 115dB
- Number of Channels per Chip :
- 4
- Terminal Pitch :
- 0.65mm
- Low-Offset :
- No
- Number of Channels :
- 4
- Shutdown :
- No Shutdown
- Factory Lead Time :
- 12 Weeks
- Gain Bandwidth Product :
- 2.8 MHz
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Pbfree Code :
- yes
- Mounting Style :
- SMD/SMT
- Voltage Gain dB :
- 115 dB
- Width :
- 4.4 mm
- Voltage - Input Offset :
- 700µV
- Type :
- General Purpose Amplifier
- Surface Mount :
- yes
- Terminal Finish :
- Matte Tin (Sn)
- Output Type :
- Rail-to-Rail
- Base Product Number :
- MCP604
- Product Category :
- Operational Amplifiers - Op Amps
- Bandwidth :
- 2.8MHz
- RoHS Status :
- ROHS3 Compliant
- Input Offset Voltage-Max :
- 3000 µV
- Operating Temperature :
- -40°C~85°C
- Supplier Package :
- TSSOP
- RoHS :
- Details
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Product Status :
- Active
- Number of Terminals :
- 14
- Pin Count :
- 14
- Number of Terminations :
- 14
- Output Current per Channel :
- 22 mA
- Radiation Hardening :
- No
- Package :
- Tube
- Micropower :
- yes
- Supply Current-Max :
- 1.3 mA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- ECCN Code :
- EAR99
- Minimum Operating Temperature :
- - 40 C
- Number of Pins :
- 14
- Product Type :
- Op Amps - Operational Amplifiers
- Lead Free :
- Lead Free
- Current - Supply :
- 230µA (x2 Channels)
- Current - Output / Channel :
- 22 mA
- Power Supplies :
- 3/5V
- Maximum Operating Supply Voltage :
- 6 V
- Supply Voltage :
- 5V
- Brand :
- Microchip Technology / Atmel
- REACH SVHC :
- No SVHC
- Qualification :
- AEC-Q100
- JESD-609 Code :
- e3
- Common Mode Rejection Ratio :
- 75 dB
- Peak Reflow Temperature (Cel) :
- 260
- Length :
- 5mm
- Screening Level :
- Industrial
- Packaging :
- Tube
- Low-Bias :
- yes
- Current - Input Bias :
- 1pA
- Amplifier Type :
- GENERAL PURPOSE
- Time@Peak Reflow Temperature-Max (s) :
- 40
- MSL :
- MSL 1 - Unlimited
- Supplier Device Package :
- 14-TSSOP
- Mounting :
- Surface Mount
- Terminal Form :
- Gull wing
- Mount :
- Surface Mount
- Maximum Operating Temperature :
- + 85 C
- Power Supply Type :
- Single
- Slew Rate :
- 2.3V/µs
- HTS Code :
- 8542.33.00.01
- Frequency Compensation :
- yes
- Output Current :
- 22mA
- Supply Type :
- Single
- Operating Supply Voltage :
- 5.5V
- Seated Height-Max :
- 1.1 mm
- Input Offset Voltage (Vos) :
- 2mV
- Series :
- MCP604
- Datasheets
- MCP604-I/ST

4 Channels 22 mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00006μA 5.5V 2.7V~6V MCP604 14 Pins 14-TSSOP (0.173, 4.40mm Width)
MCP604-I/ST Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 14 pins on it. Op amp rates 2mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 23 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 115dB for the time being. A instrumentation amplifier like this has 4 circuits. On the buffer amps, there are 4 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 5.5V. There is a recommendation that this electrical part be used with a supply with 230µA (x2 Channels) current rating. In this case, MCP604 represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 56200. 14 wire terminals are provided on this op amp.
MCP604-I/ST Features
14 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
14Terminations
MCP604-I/ST Applications
There are a lot of Microchip Technology
MCP604-I/ST Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















