MCP6033T-E/MS
- Mfr.Part #
- MCP6033T-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8MSOP
- Stock
- 25,675
- In Stock :
- 25,675
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Supply Type :
- Single
- Voltage Gain-Min :
- 56200
- Supplier Package :
- MSOP
- Number of Elements :
- 1
- Published :
- 2008
- Supply Voltage :
- 1.8V
- RoHS Status :
- ROHS3 Compliant
- Input Offset Voltage (Vos) :
- 150μV
- Number of Channels per Chip :
- 1
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Low-Bias :
- yes
- Power Supplies :
- 2/5V
- Factory Lead Time :
- 7 Weeks
- Max Operating Temperature :
- 125 °C
- Seated Height-Max :
- 1.1 mm
- Min Supply Voltage :
- 1.8 V
- Terminal Position :
- Dual
- Base Product Number :
- MCP6033
- Qualification Status :
- Not Qualified
- Product Category :
- Precision Amplifiers
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- JESD-609 Code :
- e3
- Voltage - Input Offset :
- 150μV
- Surface Mount :
- yes
- Packaging :
- Tape and Reel (TR)
- ECCN Code :
- EAR99
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- RoHS :
- Compliant
- Number of Pins :
- 8
- Reach Compliance Code :
- Compliant
- Brand :
- Microchip Technology
- Package :
- Tape and Reel (TR)
- Product Type :
- Precision Amplifiers
- Input Offset Voltage-Max :
- 150 µV
- Nominal Supply Current :
- 900nA
- Frequency Compensation :
- yes
- Packing Method :
- Tape and Reel
- Current - Input Bias :
- 1pA
- Number of Functions :
- 1
- Current - Supply :
- 900nA
- Programmable Power :
- No
- Mount :
- Surface Mount
- Peak Reflow Temperature (Cel) :
- 260
- Terminal Form :
- Gull wing
- Supply Voltage Limit-Max :
- 7V
- Supplier Device Package :
- 8-MSOP
- Maximum Operating Supply Voltage :
- 5.5 V
- Operating Supply Current :
- 900nA
- Power :
- No
- Unity Gain BW-Nom :
- 10000 kHz
- Length :
- 2.9972mm
- Number of Terminals :
- 8
- Input Bias Current :
- 100 pA
- Output Current per Channel :
- 23mA
- Bias Current-Max (IIB) @25C :
- 0.0001 µA
- HTS Code :
- 8542.33.00.01
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Circuits :
- 1
- Common Mode Rejection Ratio :
- 70 dB
- Output Type :
- Rail-to-Rail
- Slew Rate :
- 0.004V/µs
- Mounting Type :
- Surface Mount
- Supply Current-Max :
- 1.35 mA
- JESD-30 Code :
- S-PDSO-G8
- Operating Temperature :
- -40°C~125°C
- Amplifier Type :
- GENERAL PURPOSE
- Mounting :
- Surface Mount
- Minimum Operating Temperature :
- - 40 C
- Micropower :
- yes
- Pbfree Code :
- yes
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Terminal Pitch :
- 0.65mm
- Min Operating Temperature :
- -40 °C
- Voltage Gain :
- 115dB
- Number of Terminations :
- 8
- Qualification :
- AEC-Q100
- Temperature Grade :
- Automotive
- Shutdown :
- No Shutdown
- Average Bias Current-Max (IIB) :
- 0.005μA
- Maximum Operating Temperature :
- + 125 C
- Output Current :
- 23mA
- Type :
- General Purpose Amplifier
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Architecture :
- VOLTAGE-FEEDBACK
- Mounting Style :
- SMD/SMT
- Max Supply Voltage :
- 5.5 V
- Gain Bandwidth Product :
- 10kHz
- Pin Count :
- 8
- Terminal Finish :
- Matte Tin (Sn)
- Voltage Gain dB :
- 115 dB
- Manufacturer :
- Microchip
- Height :
- 939.8μm
- Wideband :
- No
- Package Shape :
- Square
- Product Status :
- Active
- Max Frequency :
- 1kHz
- Width :
- 2.9972mm
- Product :
- Precision Amplifiers
- Lead Free :
- Lead Free
- Base Part Number :
- MCP6033
- Number of Channels :
- 1
- Low-Offset :
- yes
- Series :
- --
- Operating Supply Voltage :
- 5.5 V
- Datasheets
- MCP6033T-E/MS

1 Channels 23mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 1.8V~5.5V MCP6033 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6033T-E/MS Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 150μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 900nA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125 °C. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a recommendation, this electronic component should be used with a power supply that can deliver 900nA. I would like to point out that this electrical component is capable of working from a voltage below 5.5 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 1.8 V at all times. The -- indicates the series number of the op amp. There is a minimum voltage gain of 56200 that this buffer op amp is capable of conducting. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
MCP6033T-E/MS Features
8 Pins
supply voltage of 1.8V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6033T-E/MS Applications
There are a lot of Microchip Technology
MCP6033T-E/MS Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















