MCP6033-E/SN
- Mfr.Part #
- MCP6033-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 1
- In Stock :
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Input Offset Voltage-Max :
- 150 µV
- Supply Current-Max :
- 1.35 mA
- Type :
- General Purpose Amplifier
- Lead Free :
- Lead Free
- Number of Circuits :
- 1
- Input Bias Current :
- 100 pA
- Terminal Position :
- Dual
- Number of Elements :
- 1
- Min Operating Temperature :
- -40 °C
- Product Category :
- Precision Amplifiers
- Length :
- 4.8768mm
- Package :
- Tube
- Packing Method :
- Tube
- Terminal Form :
- Gull wing
- Base Part Number :
- MCP6033
- Output Type :
- Rail-to-Rail
- Slew Rate :
- 0.004V/µs
- Low-Bias :
- yes
- Base Product Number :
- MCP6033
- Number of Terminations :
- 8
- Peak Reflow Temperature (Cel) :
- 260
- Pbfree Code :
- yes
- Supply Voltage :
- 1.8V
- Average Bias Current-Max (IIB) :
- 0.005μA
- RoHS :
- Compliant
- HTS Code :
- 8542.33.00.01
- Package Shape :
- RECTANGULAR
- Current - Supply :
- 900nA
- Radiation Hardening :
- No
- Shutdown :
- No Shutdown
- Temperature Grade :
- Automotive
- Wideband :
- No
- Series :
- --
- Maximum Operating Temperature :
- + 125 C
- Bandwidth :
- 10 kHz
- Pin Count :
- 8
- Power Supply Type :
- Single
- Height :
- 1.2446mm
- Surface Mount :
- yes
- Width :
- 3.9116mm
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Power :
- No
- Programmable Power :
- No
- Terminal Finish :
- Matte Tin (Sn)
- Seated Height-Max :
- 1.75 mm
- Input Offset Voltage (Vos) :
- 150μV
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Brand :
- Microchip Technology
- Architecture :
- VOLTAGE-FEEDBACK
- Mounting Type :
- Surface Mount
- Common Mode Rejection Ratio :
- 70 dB
- Mounting Style :
- SMD/SMT
- Voltage - Input Offset :
- 150μV
- Product Type :
- Precision Amplifiers
- Voltage Gain :
- 115dB
- Shut Down Support :
- No
- Mounting :
- Surface Mount
- Output Current per Channel :
- 23mA
- Supply Voltage Limit-Max :
- 7V
- JESD-609 Code :
- e3
- Number of Pins :
- 8
- Maximum Operating Supply Voltage :
- 5.5 V
- Max Supply Voltage :
- 5.5 V
- Current - Input Bias :
- 1pA
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Number of Channels :
- 1
- Low-Offset :
- yes
- Operating Supply Voltage :
- 5.5 V
- Supply Type :
- Single
- REACH SVHC :
- No SVHC
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Output Current :
- 23mA
- Voltage Gain dB :
- 115 dB
- Min Supply Voltage :
- 1.8 V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power Supplies :
- 2/5V
- Unity Gain BW-Nom :
- 10000 kHz
- Micropower :
- yes
- Qualification :
- AEC-Q100
- JESD-30 Code :
- R-PDSO-G8
- Amplifier Type :
- GENERAL PURPOSE
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Operating Temperature :
- -40°C~125°C
- Number of Functions :
- 1
- RoHS Status :
- ROHS3 Compliant
- Supplier Device Package :
- 8-SOIC
- Max Operating Temperature :
- 125 °C
- Max Frequency :
- 1kHz
- Frequency Compensation :
- yes
- Minimum Operating Temperature :
- - 40 C
- Reach Compliance Code :
- Compliant
- Packaging :
- Tube
- Operating Supply Current :
- 900nA
- Published :
- 2000
- Product :
- Precision Amplifiers
- Gain Bandwidth Product :
- 10kHz
- Qualification Status :
- Not Qualified
- Mount :
- Surface Mount
- Number of Amplifiers :
- 1
- Voltage Gain-Min :
- 56200
- Nominal Supply Current :
- 900nA
- Supplier Package :
- SOIC N
- Manufacturer :
- Microchip
- Product Status :
- Active
- Factory Lead Time :
- 9 Weeks
- Bias Current-Max (IIB) @25C :
- 0.0001 µA
- Terminal Pitch :
- 1.27 mm
- ECCN Code :
- EAR99
- Number of Channels per Chip :
- 1
- Number of Terminals :
- 8
- Datasheets
- MCP6033-E/SN

1 Channels 23mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 1.8V~5.5V MCP6033 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6033-E/SN Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 150μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 900nA , this buffer op amp will be able to operate. 115dB should be the voltage gain. The buffer amp consists of 1 circuits in total. 1 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 125 °C . There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 5.5 V. A TUBE-shaped amplifier is used to pack the buffer amps. A supply of 900nA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.5 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 1.8 V, it is recommended to keep it higher. The -- stands for the buffer op amp's serial number. There are a maximum of 56200 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. As you can see, the linear amplifier has 1 amplifiers. The buffer op amp has 8 terminals that can be used for connecting wires to the amplifier.
MCP6033-E/SN Features
8 Pins
supply voltage of 1.8V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6033-E/SN Applications
There are a lot of Microchip Technology
MCP6033-E/SN Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















