MCP602-E/ST
- Mfr.Part #
- MCP602-E/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8TSSOP
- Stock
- 534
- In Stock :
- 534
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Power Supply Type :
- Single
- Supply Type :
- Single
- Terminal Position :
- Dual
- Series :
- --
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Screening Level :
- Extended Industrial
- Low-Offset :
- No
- Peak Reflow Temperature (Cel) :
- 260
- Architecture :
- VOLTAGE-FEEDBACK
- Unity Gain BW-Nom :
- 2800 kHz
- Package :
- Tube
- Base Product Number :
- MCP602
- JESD-30 Code :
- R-PDSO-G8
- Factory Lead Time :
- 10 Weeks
- Temperature Grade :
- Automotive
- Shutdown :
- No Shutdown
- Bandwidth :
- 2.8MHz
- Number of Circuits :
- 2
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V
- Input Offset Voltage-Max :
- 4500 µV
- Amplifier Type :
- GENERAL PURPOSE
- Height :
- 1.05mm
- Output Current per Channel :
- 22 mA
- Surface Mount :
- yes
- Current - Supply :
- 230μA
- Number of Channels per Chip :
- 2
- Packaging :
- Tube
- Manufacturer :
- Microchip
- Supply Voltage Limit-Max :
- 7V
- Package / Case :
- 8-TSSOP (0.173, 4.40mm Width)
- Supply Current-Max :
- 0.65 mA
- HTS Code :
- 8542.33.00.01
- Low-Bias :
- yes
- Number of Pins :
- 8
- Operating Supply Current :
- 23 uA
- Mounting :
- Surface Mount
- REACH SVHC :
- No SVHC
- Common Mode Rejection Ratio :
- 75 dB
- Voltage Gain dB :
- 115 dB
- Pbfree Code :
- yes
- Number of Functions :
- 2
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Voltage Gain-Min :
- 56200
- Seated Height-Max :
- 1.1 mm
- Voltage Gain :
- 115dB
- Mount :
- Surface Mount
- Average Bias Current-Max (IIB) :
- 0.005μA
- Voltage - Input Offset :
- 700µV
- Supply Voltage :
- 5V
- Brand :
- Microchip Technology / Atmel
- Mounting Style :
- SMD/SMT
- Type :
- General Purpose Amplifier
- Gain Bandwidth Product :
- 2.8MHz
- Input Offset Voltage (Vos) :
- 2mV
- Package Shape :
- RECTANGULAR
- Maximum Operating Supply Voltage :
- 6 V
- Qualification Status :
- Not Qualified
- RoHS Status :
- ROHS3 Compliant
- Pin Count :
- 8
- Product Type :
- Op Amps - Operational Amplifiers
- Operating Supply Voltage :
- 5.5V
- Product :
- Operational Amplifiers
- Supplier Device Package :
- 8-TSSOP
- Output Type :
- Rail-to-Rail
- Published :
- 2007
- Width :
- 4.5mm
- Number of Terminals :
- 8
- Mounting Type :
- Surface Mount
- Minimum Operating Temperature :
- - 40 C
- Terminal Form :
- Gull wing
- Shut Down Support :
- No
- Operating Temperature :
- -40°C~125°C
- Current - Output / Channel :
- 22mA
- Current - Input Bias :
- 1pA
- Base Part Number :
- MCP602
- Max Frequency :
- 10kHz
- Product Category :
- Operational Amplifiers - Op Amps
- Terminal Finish :
- Matte Tin (Sn)
- Output Current :
- 22mA
- Nominal Supply Current :
- 230μA
- Reach Compliance Code :
- Compliant
- Micropower :
- yes
- Number of Channels :
- 2
- Qualification :
- AEC-Q100
- Power Supplies :
- 3/5V
- Radiation Hardening :
- No
- Number of Terminations :
- 8
- RoHS :
- Details
- MSL :
- MSL 1 - Unlimited
- Time@Peak Reflow Temperature-Max (s) :
- 40
- JESD-609 Code :
- e3
- Terminal Pitch :
- 0.65mm
- Length :
- 3.1mm
- Supplier Package :
- TSSOP
- Frequency Compensation :
- yes
- Lead Free :
- Lead Free
- Maximum Operating Temperature :
- + 125 C
- ECCN Code :
- EAR99
- Product Status :
- Active
- Slew Rate :
- 2.3V/µs
- Datasheets
- MCP602-E/ST
2 Channels 22 mA per Channel 1pA 75 dB Instrumentational OP Amps 0.005μA 5.5V 2.7V~6V MCP602 8 Pins 8-TSSOP (0.173, 4.40mm Width)
MCP602-E/ST Overview
It is packaged in an 8-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 2mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 23 uA can be used to operate this linear amplifier. There should be no change in the voltage gain at 115dB. This op amp ic has 2 circuits. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5.5V. For optimal performance, this electrical part should be connected to a supply with a current of 230µA. Buffer op amp series numbers are indicated by the --. This op amp ic can conduct a minimum voltage gain of 56200. There are 8 wire terminals on this op amp ic.
MCP602-E/ST Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP602-E/ST Applications
There are a lot of Microchip Technology
MCP602-E/ST Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















