MCP601-I/P
- Mfr.Part #
- MCP601-I/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8DIP
- Stock
- 6,988
- In Stock :
- 6,988
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Rail to Rail :
- Rail to Rail Output
- Unity Gain BW-Nom :
- 2800 kHz
- Gain Bandwidth Product :
- 2.8MHz
- Terminal Pitch :
- 2.54mm
- Supply Voltage Limit-Max :
- 7V
- Supply Type :
- Single
- Pin Count :
- 8
- RoHS Status :
- ROHS3 Compliant
- Programmable Power :
- No
- Lead Free :
- Lead Free
- JESD-30 Code :
- R-PDIP-T8
- REACH SVHC :
- No SVHC
- Supplier Device Package :
- 8-PDIP
- Wideband :
- No
- Architecture :
- VOLTAGE-FEEDBACK
- Supplier Package :
- PDIP
- Package :
- Tube
- Dimensions :
- 9.27 x 6.35 x 3.3mm
- Radiation Hardening :
- No
- Maximum Operating Supply Voltage :
- 6 V
- Maximum Operating Temperature :
- +85 °C
- Packaging :
- Tube
- HTS Code :
- 8542.33.00.01
- Surface Mount :
- No
- RoHS :
- Details
- Length :
- 10.16mm
- Current - Supply :
- 230μA
- JESD-609 Code :
- e3
- Terminal Form :
- THROUGH-HOLE
- Shutdown :
- No Shutdown
- Output Current per Channel :
- 22mA
- Number of Terminals :
- 8
- Product Type :
- Op Amps - Operational Amplifiers
- Number of Channels :
- 1
- Product :
- Operational Amplifiers
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Voltage - Input Offset :
- 700µV
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Seated Height-Max :
- 4.32 mm
- Output Type :
- Rail-to-Rail
- Input Offset Voltage-Max :
- 3000 µV
- Common Mode Rejection Ratio :
- 75 dB
- Frequency Compensation :
- yes
- Output Current :
- 22mA
- Factory Lead Time :
- 7 Weeks
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V
- Operating Supply Current :
- 230μA
- Voltage Gain-Min :
- 56200
- Low-Bias :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Pbfree Code :
- yes
- Base Part Number :
- MCP601
- Series :
- --
- Number of Terminations :
- 8
- MSL :
- -
- Input Offset Voltage (Vos) :
- 2mV
- Published :
- 2000
- Micropower :
- yes
- Nominal Supply Current :
- 230μA
- Qualification :
- AEC-Q100
- Terminal Position :
- Dual
- Shut Down Support :
- No
- Manufacturer :
- Microchip
- Current - Input Bias :
- 1pA
- Number of Circuits :
- 1
- Product Category :
- Operational Amplifiers - Op Amps
- Bandwidth :
- 2.8MHz
- Base Product Number :
- MCP601
- Mounting Type :
- Through Hole
- Operating Supply Voltage :
- 5.5V
- Mounting Style :
- Through Hole
- Number of Pins :
- 8
- Voltage Gain dB :
- 115 dB
- Qualification Status :
- Not Qualified
- Amplifier Type :
- GENERAL PURPOSE
- Supply Current-Max :
- 0.325 mA
- Product Status :
- Active
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Brand :
- Microchip Technology / Atmel
- Mount :
- Through Hole
- Number of Functions :
- 1
- Reach Compliance Code :
- Compliant
- Width :
- 7.112mm
- Low-Offset :
- No
- Height :
- 4.953mm
- Supply Voltage :
- 5V
- Peak Reflow Temperature (Cel) :
- Not Applicable
- Temperature Grade :
- Industrial
- Power Supply Type :
- Single
- ECCN Code :
- EAR99
- Manufacturer Package Identifier :
- MCP601/1R/2/3/4
- Power :
- No
- Screening Level :
- Industrial
- Type :
- General Purpose Amplifier
- Common-mode Reject Ratio-Min :
- 75 dB
- Voltage Gain :
- 115dB
- Operating Temperature :
- -40°C~85°C
- Mounting :
- Through Hole
- Package Type :
- PDIP
- Terminal Finish :
- Matte Tin (Sn)
- Slew Rate :
- 2.3V/µs
- Package Shape :
- RECTANGULAR
- Power Supplies :
- 3/5V
- Number of Channels per Chip :
- 1
- Current - Output / Channel :
- 22mA
- Minimum Operating Temperature :
- -40 °C
- Datasheets
- MCP601-I/P

1 Channels 22mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00006μA 5.5V 2.7V~6V MCP601 8 Pins 8-DIP (0.300, 7.62mm)
MCP601-I/P Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 230μA , this buffer op amp will be able to operate. Keeping the voltage gain at 115dB is the best course of action. The buffer amp consists of 1 circuits in total. 1 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5.5V. A supply of 230µA or higher is recommended for use with this electronic part. The -- stands for the buffer op amp's serial number. There are a maximum of 56200 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. The buffer op amp has 8 terminals that can be used for connecting wires to the amplifier.
MCP601-I/P Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP601-I/P Applications
There are a lot of Microchip Technology
MCP601-I/P Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















