MCP6002-E/SN
- Mfr.Part #
- MCP6002-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 12,028
- In Stock :
- 12,028
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Output Current :
- 23mA
- JESD-609 Code :
- e3
- Wideband :
- No
- Output Current per Channel :
- 23 mA
- Power Supply Rejection Ratio (PSRR) :
- 86dB
- Voltage - Input Offset :
- 4.5mV
- Terminal Position :
- Dual
- Maximum Operating Supply Voltage :
- 6 V
- Number of Channels per Chip :
- 2
- Supply Current-Max :
- 0.34 mA
- Current - Input Bias :
- 1pA
- Operating Temp Range :
- -40C to 125C
- Shutdown :
- No Shutdown
- Power Supplies :
- 2/5 V
- Mounting :
- Surface Mount
- Reach Compliance Code :
- Compliant
- Width :
- 3.9mm
- Base Product Number :
- MCP6002
- Rad Hardened :
- No
- RoHS :
- Details
- Base Part Number :
- MCP6002
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Type :
- General Purpose Amplifier
- Dual Supply Voltage (Min) :
- Not Required(V)
- Gain Bandwidth Product :
- 1MHz
- Power Supply Requirement :
- Single
- Number of Functions :
- 2
- Temperature Grade :
- Automotive
- Product Status :
- Active
- Operating Supply Current :
- 100 uA
- Package Type :
- SOIC N
- Input Offset Voltage (Vos) :
- 4.5mV
- Radiation Hardening :
- No
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Number of Terminations :
- 8
- Mounting Type :
- Surface Mount
- Maximum Operating Temperature :
- +125 °C
- Length :
- 4.9mm
- Manufacturer :
- Microchip
- Input Bias Current :
- 0.001(nA)
- Supply Voltage :
- 5V
- Number of Channels :
- 2
- Published :
- 2005
- RoHS Status :
- ROHS3 Compliant
- Product Type :
- Op Amps - Operational Amplifiers
- REACH SVHC :
- No SVHC
- Packaging :
- Tube
- Voltage Gain :
- 112dB
- Bandwidth :
- 1MHz
- Supply Voltage Limit-Max :
- 7V
- Series :
- --
- Minimum Operating Temperature :
- -40 °C
- Power Supply Rejection Ratio :
- 86(dB)
- Unity Gain BW-Nom :
- 1000 kHz
- Voltage Gain-Min :
- 25110
- Product :
- Operational Amplifiers
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power :
- No
- Surface Mount :
- yes
- Common Mode Rejection Ratio :
- 60 dB
- Input Offset Voltage :
- 4.5(mV)
- Mounting Style :
- SMD/SMT
- Amplifier Type :
- GENERAL PURPOSE
- Single Supply Voltage (Max) :
- 6(V)
- Input Offset Voltage-Max :
- 4500 µV
- Operating Temperature :
- -40°C~125°C
- Lead Free :
- Lead Free
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Voltage Gain dB :
- 112 dB
- Brand :
- Microchip Technology / Atmel
- Output Type :
- Rail-to-Rail
- Product Category :
- Operational Amplifiers - Op Amps
- Rail to Rail :
- Rail to Rail Input/Output
- Operating Supply Voltage :
- 5.5V
- Terminal Form :
- Gull wing
- Power Supply Type :
- Single
- Package :
- Tube
- HTS Code :
- 8542.33.00.01
- Terminal Finish :
- Matte Tin (Sn)
- Slew Rate :
- 0.6V/µs
- MSL :
- -
- Nominal Supply Current :
- 100μA
- Micropower :
- yes
- Qualification :
- AEC-Q100
- Number of Circuits :
- 2
- ECCN Code :
- EAR99
- Supplier Package :
- SOIC N
- Number of Elements :
- 2
- Voltage Gain in dB :
- 112(dB)
- Number of Pins :
- 8
- Current - Supply :
- 100μA
- Seated Height-Max :
- 1.75 mm
- JESD-30 Code :
- R-PDSO-G8
- Height :
- 1.25mm
- Single Supply Voltage (Min) :
- 1.8(V)
- Frequency Compensation :
- yes
- Programmable Power :
- No
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Mount :
- Surface Mount
- Low-Offset :
- No
- Terminal Pitch :
- 1.27 mm
- Dual Supply Voltage (Max) :
- Not Required(V)
- Shut Down Feature :
- No
- Operating Temperature Classification :
- Automotive
- Supply Type :
- Single
- Pbfree Code :
- yes
- Package Shape :
- RECTANGULAR
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Qualification Status :
- Not Qualified
- Single Supply Voltage (Typ) :
- 3/5(V)
- Screening Level :
- Extended
- Peak Reflow Temperature (Cel) :
- 260
- Unity Gain Bandwidth Product :
- 1
- Low-Bias :
- No
- Pin Count :
- 8
- Architecture :
- VOLTAGE-FEEDBACK
- Current - Output / Channel :
- 23mA
- Supplier Device Package :
- 8-SOIC
- Number of Terminals :
- 8
- Factory Lead Time :
- 12 Weeks
- Datasheets
- MCP6002-E/SN

2 Channels 23 mA per Channel 1pA 60 dB Instrumentational OP Amps 5.5V 1.8V~6V MCP6002 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6002-E/SN Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 4.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 100 uA and 10 . Maintain 112dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. This electronic part is recommended to be used with an 100μA supply for best performance. -- is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 25110 is the minimum voltage gain that this instrumentation amplifier is capable of producing. As part of this op amp ic, there are 8 terminals on which wires can be connected.
MCP6002-E/SN Features
8 Pins
supply voltage of 5V
112dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6002-E/SN Applications
There are a lot of Microchip Technology
MCP6002-E/SN Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















