MCP6002-E/MC
- Mfr.Part #
- MCP6002-E/MC
- Manufacturer
- Microchip Technology
- Package / Case
- 8-VFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8DFN
- Stock
- 30,392
- In Stock :
- 30,392
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Package :
- Tube
- Voltage Gain dB :
- 112 dB
- Qualification Status :
- Not Qualified
- Terminal Form :
- NO LEAD
- Product Category :
- Operational Amplifiers - Op Amps
- Supplier Package :
- DFN EP
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Surface Mount :
- yes
- Supply Voltage Limit-Max :
- 7V
- Minimum Operating Temperature :
- -40 °C
- Power Supply Type :
- Single
- Dimensions :
- 2 x 3 x 0.95mm
- JESD-30 Code :
- R-PDSO-N8
- Manufacturer :
- Microchip
- Output Current per Channel :
- 23 mA
- Programmable Power :
- No
- Type :
- General Purpose Amplifier
- Qualification :
- AEC-Q100
- Current - Input Bias :
- 1pA
- RoHS :
- Details
- RoHS Status :
- ROHS3 Compliant
- Number of Channels :
- 2 Channel
- Wideband :
- No
- Pin Count :
- 8
- Number of Channels per Chip :
- 2
- Number of Terminations :
- 8
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Shutdown :
- No Shutdown
- Max Frequency :
- 1kHz
- Operating Supply Current :
- 100 uA
- ECCN Code :
- EAR99
- Number of Elements :
- 2
- Maximum Operating Supply Voltage :
- 6 V
- Output Type :
- Rail-to-Rail
- Length :
- 2mm
- Mounting Style :
- SMD/SMT
- Screening Level :
- Extended
- Supply Current-Max :
- 0.34 mA
- Operating Supply Voltage :
- 5.5V
- Series :
- --
- Supplier Device Package :
- 8-DFN (2x3)
- Temperature Grade :
- Automotive
- Number of Pins :
- 8
- Slew Rate :
- 0.6V/µs
- Low-Bias :
- No
- Packaging :
- Tube
- Terminal Position :
- Dual
- Power Supply Rejection Ratio (PSRR) :
- 86dB
- Terminal Pitch :
- 0.5mm
- Frequency Compensation :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Input Offset Voltage-Max :
- 4500 µV
- Number of Terminals :
- 8
- JESD-609 Code :
- e3
- Seated Height-Max :
- 1 mm
- Voltage Gain :
- 112dB
- Pbfree Code :
- yes
- Unity Gain BW-Nom :
- 1000 kHz
- Product Type :
- Op Amps - Operational Amplifiers
- Architecture :
- VOLTAGE-FEEDBACK
- Maximum Operating Temperature :
- +125 °C
- Lead Free :
- Lead Free
- Published :
- 2008
- Reach Compliance Code :
- Compliant
- HTS Code :
- 8542.39.00.01
- Mounting Type :
- Surface Mount
- Operating Temperature :
- -40°C~125°C
- Voltage Gain-Min :
- 25110
- Gain Bandwidth Product :
- 1MHz
- Factory Lead Time :
- 12 Weeks
- Power :
- No
- Base Part Number :
- MCP6002
- Number of Circuits :
- 2
- Peak Reflow Temperature (Cel) :
- 260
- Supply Voltage :
- 5V
- Brand :
- Microchip Technology / Atmel
- Power Supplies :
- 2/5 V
- Radiation Hardening :
- No
- Mounting :
- Surface Mount
- Base Product Number :
- MCP6002
- Nominal Supply Current :
- 100μA
- Package / Case :
- 8-VFDFN Exposed Pad
- Low-Offset :
- No
- Package Type :
- DFN
- Voltage - Input Offset :
- 4.5mV
- Output Current :
- 23mA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Type :
- Single
- Bandwidth :
- 1MHz
- Width :
- 3mm
- Rail to Rail :
- Rail to Rail Input/Output
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Current - Output / Channel :
- 23 mA
- Product Status :
- Active
- Input Offset Voltage (Vos) :
- 4.5mV
- Micropower :
- yes
- Mount :
- Surface Mount
- Package Shape :
- RECTANGULAR
- Current - Supply :
- 100μA
- Height :
- 950μm
- Product :
- Operational Amplifiers
- Common Mode Rejection Ratio :
- 60 dB
- Number of Functions :
- 2
- Datasheets
- MCP6002-E/MC

2 Channel Channels 23 mA per Channel 1pA 60 dB Instrumentational OP Amps 5.5V 1.8V~6V MCP6002 8 Pins 8-VFDFN Exposed Pad
MCP6002-E/MC Overview
There is a 8-VFDFN Exposed Pad case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 4.5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 100 uA . It is recommended to keep the voltage gain at 112dB at all times. This op amp contains 2 circuits. On the buffer amps, there are 2 Channel channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The total number of elements in this buffer amplifier is 2. The operating supply voltage of the buffer op amp is rated at 5.5V. It is recommended that you use an 100µA power supply with this electrical part in order for it to operate correctly. Instrumentation amplifiers are numbered by their -- series. This op amp ic is capable of conducting at least 25110 voltage gains. There are 8 terminals for wires on this op amp ic.
MCP6002-E/MC Features
8 Pins
supply voltage of 5V
112dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6002-E/MC Applications
There are a lot of Microchip Technology
MCP6002-E/MC Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















