MAX6720UTRVD3+

Share

Or copy the link below:

Mfr.Part #
MAX6720UTRVD3+
Manufacturer
Analog Devices, Inc.
Package / Case
SOT-23-6
Datasheet
Download
Description
MAX6720UTRVD3+
Stock
34,721
In Stock :
34,721

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Analog Devices, Inc.
Product Category :
Supervisors
RoHS Status :
ROHS3 Compliant
Undervoltage Threshold :
1.53V
Number of Voltages Monitored :
3
JESD-609 Code :
e3
Operating Temperature :
-40°C~85°C TA
Operating Supply Current :
15µA
Published :
2006
Adjustable Threshold :
yes
Length :
2.9mm
Base Part Number :
MAX6720
Overvoltage Threshold :
1.62V
Height Seated (Max) :
1.45mm
Number of Terminations :
6
Max Power Dissipation :
696mW
Pin Count :
6
Reset Timeout :
140ms Minimum
Peak Reflow Temperature (Cel) :
260
ECCN Code :
EAR99
Terminal Position :
Dual
Min Supply Voltage :
800mV
Type :
Multi-Voltage Supervisor
Output :
Push-Pull, Totem Pole
Number of Functions :
1
Terminal Form :
Gull wing
Package / Case :
SOT-23-6
Watchdog Timer :
No
Reset :
Active Low
Lead Free :
Lead Free
Terminal Pitch :
0.95mm
Mount :
Surface Mount
Packaging :
Tape and Reel (TR)
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Power Supplies :
1/5V
Mounting Type :
Surface Mount
Voltage - Threshold :
1.575V 2.625V Adj
Max Supply Voltage :
5.5V
Terminal Finish :
Matte Tin (Sn)
Number of Pins :
6
Pbfree Code :
yes
Number of Channels :
3
Datasheets
MAX6720UTRVD3+
Introducing Supervisors Analog Devices, Inc. MAX6720UTRVD3+ from Chip IC,where excellence meets affordability. This product stands out with its Operating Temperature:-40°C~85°C TA, Base Part Number:MAX6720, Number of Terminations:6, Type:Multi-Voltage Supervisor, Output:Push-Pull, Totem Pole, Package / Case:SOT-23-6, Mounting Type:Surface Mount, Number of Pins:6, Number of Channels:3, MAX6720UTRVD3+ pinout, MAX6720UTRVD3+ datasheet PDF, MAX6720UTRVD3+ amp .Beyond Supervisors Analog Devices, Inc. MAX6720UTRVD3+ ,we also offer XC6121E616ER-G, SR1UARU, TPS3840DL28DBVR, Our vast inventory has you covered. Contact us now for immediate solutions.



6 Terminals 6-Pin MAX6720 Voltage supervisor 3 Channels Min 800mV Max 5.5V

MAX6720UTRVD3+T Overview


It is mounted through 6 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 3 channels. There are SOT-23-6 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 3. Using Surface Mount, IC management is mounted. In total, IC powers are 6 pins on the board. 6 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6720, which is the base power ics number. There is a requirement for 1/5V power to power this power management.

MAX6720UTRVD3+T Features


Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current


MAX6720UTRVD3+T Applications


There are a lot of Maxim Integrated
MAX6720UTRVD3+T Voltage Supervisors applications.


  • Power distribution systems of CCU
  • emergency room
  • Medical-specific isolation transformer
  • Medical-specific insulation monitor
  • Transformer load monitoring equipment
  • External alarm
  • Display equipment
  • DC stabilized power supply module
  • Insulation fault location system
  • Magnetic resonance imaging
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

RFQ
BOM