M27C1001-12C1
Or copy the link below:
- Mfr.Part #
- M27C1001-12C1
- Manufacturer
- STMicroelectronics
- Package / Case
- 32-LCC (J-Lead)
- Datasheet
- Download
- Description
- IC EPROM 1MBIT PARALLEL 32PLCC
- Stock
- 47,010
- In Stock ：
- 47,010
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- STMicroelectronics
- Product Category :
- Memory
- Number of Terminations :
- 32
- Standby Current-Max :
- 0.0001A
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Operating Temperature :
- 0°C~70°C TA
- Access Time :
- 120ns
- Memory Interface :
- Parallel
- Number of Pins :
- 32
- Lead Free :
- Lead Free
- Length :
- 13.97mm
- Mounting Type :
- Surface Mount
- Base Part Number :
- M27C1001
- Peak Reflow Temperature (Cel) :
- 245
- Frequency :
- 120GHz
- Output Characteristics :
- 3-STATE
- JESD-609 Code :
- e3
- Power Supplies :
- 5V
- Voltage - Supply :
- 4.5V~5.5V
- Pbfree Code :
- yes
- Mount :
- Surface Mount
- Supply Voltage :
- 5V
- Memory Type :
- Non-Volatile
- Memory Size :
- 1Mb 128K x 8
- Additional Feature :
- 00.1.142
- RoHS Status :
- ROHS3 Compliant
- Qualification Status :
- Not Qualified
- Pin Count :
- 32
- Terminal Position :
- QUAD
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Terminal Finish :
- Matte Tin (Sn)
- ECCN Code :
- EAR99
- Number of Functions :
- 1
- Operating Supply Current :
- 30mA
- Height Seated (Max) :
- 3.56mm
- Density :
- 1 Mb
- Memory Format :
- EPROM
- I/O Type :
- COMMON
- Operating Mode :
- ASYNCHRONOUS
- Nominal Supply Current :
- 50mA
- Operating Supply Voltage :
- 5V
- Packaging :
- Tube
- Width :
- 11.43mm
- Organization :
- 128KX8
- Terminal Pitch :
- 1.27mm
- Package / Case :
- 32-LCC (J-Lead)
- Memory Width :
- 8
- Datasheets
- M27C1001-12C1
5V V Surface Mount 32 Pin Memory IC M27C1001 1 Mb kb 13.97mm mm 50mA mA
M27C1001-12C1 Overview
In this case, the memory type of the device can be classified as Non-Volatile. Case Tube is available. An embedded 32-LCC (J-Lead) case surrounds memory ics. It is estimated that the memory size on the chip is 1Mb 128K x 8. As with most mainstream devices, this one uses EPROM-format memory. Due to its wide temperature range of 0°C~70°C TA, this device is well suited to a wide range of applications that require high performance. With 4.5V~5.5V as the supply voltage, it is capable of handling memory ics. It is recommended to mount it in the Surface Mount mounting type. It is planted on the chip with 32 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. A device's base part number, M27C1001, is often used in order to identify similar components. The ic memory chip comes in a package with 32 pins that allows it to be connected to a computer. The memory device has a total of 32 pins, thus indicating that it has a total of 32 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 50mA for its nominal supply current when it comes to the memory component. This chip is not only loaded with advantages, but it also comes with 00.1.142, which boosts the performance of your system. In terms of power requirements, this memory chip uses only 5V . I/O port addresses in this device are mapped to COMMON bits from the device's memory. Using this memory chip, you will be able to process data at a speed of 120GHz times per second. An 30mA volt supply current is recommended for this device
M27C1001-12C1 Features
Package / Case: 32-LCC (J-Lead)
32 Pins
Operating Supply Voltage:5V
Additional Feature:00.1.142
I/O Type: COMMON
Freguency at 120GHz
120GHz terminals
M27C1001-12C1 Applications
There are a lot of STMicroelectronics
M27C1001-12C1 Memory applications.
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
