LTC6242CGN#PBF
- Mfr.Part #
- LTC6242CGN#PBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- Axial
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 16SSOP
- Stock
- 2,286
- In Stock :
- 2,286
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Terminations :
- 2
- Shut Down Feature :
- No
- Supply Current :
- 8.8@5V(mA)
- Temperature Grade :
- COMMERCIAL
- Unity Gain Bandwidth Product :
- 18
- Brand Name :
- Analog Devices Inc
- Reach Compliance Code :
- Compliant
- Qualification Status :
- Not Qualified
- Failure Rate :
- R (0.01%)
- Package Type :
- SSOP N
- Voltage Gain dB :
- 64 dB
- Input Offset Voltage-Max :
- 275 µV
- Operating Temperature :
- -65°C ~ 150°C
- Voltage - Input Offset :
- 60 µV
- Product Status :
- Active
- Shutdown :
- No Shutdown
- Terminal Form :
- Gull wing
- Maximum Operating Temperature :
- + 70 C
- Power (Watts) :
- 0.125W, 1/8W
- Seated Height-Max :
- 1.75 mm
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Technology :
- CMOS
- Manufacturer :
- Analog Devices Inc.
- Features :
- Military, Moisture Resistant, Weldable
- JESD-609 Code :
- e3
- Operating Temperature Classification :
- COMMERCIAL
- Subcategory :
- Amplifier ICs
- Current - Input Bias :
- 0.5 pA
- Dual Supply Voltage (Max) :
- Not Required(V)
- Operating Temp Range :
- 0C to 70C
- Mounting Type :
- Surface Mount
- Gain Bandwidth Product :
- 18 MHz
- Terminal Pitch :
- 0.635 mm
- Settling Time :
- 1.1(us)
- Maximum Input Offset Current :
- 0.0000002(TYP)@5V
- Output Type :
- Rail-to-Rail
- Temperature Coefficient :
- ±100ppm/°C
- JESD-30 Code :
- R-PDSO-G16
- Rad Hardened :
- No
- Series :
- Military, MIL-PRF-39017/05, RLR05
- Pbfree Code :
- No
- Package Shape :
- RECTANGULAR
- Number of Circuits :
- 4
- Type :
- Low Noise Amplifier
- Peak Reflow Temperature (Cel) :
- 260
- Rail/Rail I/O Type :
- Rail to Rail Output
- Mounting :
- Surface Mount
- Number of Functions :
- 4
- Common Mode Rejection Ratio :
- 80(dB)
- Package / Case :
- Axial
- Base Product Number :
- RLR05
- Amplifier Type :
- Low Noise Operational Amplifier
- Packaging :
- Rail/Tube
- RoHS :
- Details
- Power Supply Rejection Ratio :
- 80(dB)
- Number of Elements :
- 4
- Slew Rate :
- 10(V/us)
- Single Supply Voltage (Max) :
- 6(V)
- Length :
- 4.9 mm
- Single Supply Voltage (Typ) :
- 3/5(V)
- Single Supply Voltage (Min) :
- 2.8(V)
- Operating Supply Current :
- 1.8 mA
- Power Supply Requirement :
- Single
- Number of Channels :
- 4 Channel
- Dual Supply Voltage (Min) :
- Not Required(V)
- Current - Supply :
- 1.8mA (x4 Channels)
- Average Bias Current-Max (IIB) :
- 0.000075 µA
- Surface Mount :
- yes
- Tolerance :
- ±1%
- Product :
- Operational Amplifiers
- Supply Voltage Limit-Max :
- 7 V
- Product Category :
- Precision Amplifiers
- Supplier Device Package :
- Axial
- Input Offset Voltage :
- 0.15(mV)
- Terminal Position :
- Dual
- Brand :
- Analog Devices
- Mounting Style :
- SMD/SMT
- Product Type :
- Precision Amplifiers
- Width :
- 3.9 mm
- Current - Output / Channel :
- 30 mA
- Terminal Finish :
- MATTE TIN
- Number of Terminals :
- 16
- Unity Gain BW-Nom :
- 17000 kHz
- Minimum Operating Temperature :
- 0 C
- Resistance :
- 140 kOhms
- Output Current per Channel :
- 30 mA
- Height - Seated (Max) :
- -
- Voltage Gain in dB :
- 124.08(dB)
- Package :
- Bulk
- Size / Dimension :
- 0.066 Dia x 0.150 L (1.68mm x 3.81mm)
- Composition :
- Metal Film
- Pin Count :
- 16
- Datasheets
- LTC6242CGN#PBF

4 Channel Channels 30 mA per Channel 0.5 pA 80(dB) Instrumentational OP Amps 0.000075 µA 16 Pins Axial
LTC6242CGN#PBF Overview
In the package, you will find a Axial-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Low Noise Operational Amplifier-type. A Rail/Tube case is used for delivering the op amp. During the past two weeks, there have been close to 2 terminations. A total of 16 pins are located on this board. This particular linear amplifier is a type of Amplifier ICs device, to be precise. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -65°C ~ 150°C , which is a good operating temperature. Using an 1.8 mA supply current, this operational amplifier ics can be operated. A instrumentation amplifier like this has 4 circuits. On the buffer amps, there are 4 Channel channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. 4 elements make up the design of this buffer amplifier. There is a recommendation that this electrical part be used with a supply with 1.8mA (x4 Channels) current rating. In this case, Military, MIL-PRF-39017/05, RLR05 represents the instrumentation amplifiers' series number. During testing, the buffer amplifier resistance should remain within a range of 140 kOhms. 16 wire terminals are provided on this op amp.
LTC6242CGN#PBF Features
16 Pins
Output Type: Rail-to-Rail
Resistance of 140 kOhms
16Terminations
LTC6242CGN#PBF Applications
There are a lot of Analog Devices
LTC6242CGN#PBF Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















