LT6203IS8#PBF
- Mfr.Part #
- LT6203IS8#PBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SO
- Stock
- 16,418
- In Stock :
- 16,418
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Seated Height-Max :
- 1.752 mm
- Min Supply Voltage :
- 2.5 V
- Mounting Style :
- SMD/SMT
- Series :
- LT®
- Nominal Gain Bandwidth Product :
- 100 MHz
- Manufacturer :
- Analog Devices Inc.
- Pbfree Code :
- No
- Input Type :
- Rail-to-Rail
- Operating Temperature :
- -40°C ~ 85°C
- Voltage - Input Offset :
- 2.6 mV
- Operating Supply Current :
- 2.8 mA
- Supplier Device Package :
- 8-SO
- Number of Functions :
- 2
- Common Mode Rejection Ratio :
- 60 dB
- Current - Supply :
- 2.8mA (x2 Channels)
- Unity Gain BW-Nom :
- 90000 kHz
- Temperature Grade :
- Industrial
- Qualification Status :
- Not Qualified
- Input Bias Current :
- 3.8 µA
- Maximum Operating Temperature :
- + 85 C
- Time@Peak Reflow Temperature-Max (s) :
- 30
- Voltage Gain dB :
- -
- Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Average Bias Current-Max (IIB) :
- 3.6 µA
- Product Type :
- Op Amps - High Speed Operational Amplifiers
- Packaging :
- Tube
- Supply Voltage Limit-Max :
- 6.3 V
- Min Operating Temperature :
- -40 °C
- Voltage Gain :
- 96.9 dB
- Product Category :
- High Speed Operational Amplifiers
- Manufacturer Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Product :
- Operational Amplifiers
- Amplifier Type :
- GENERAL PURPOSE
- RoHS :
- Compliant
- Brand Name :
- Analog Devices Inc
- Reach Compliance Code :
- Compliant
- Output Current per Channel :
- 40 mA
- Number of Pins :
- 8
- Terminal Finish :
- MATTE TIN
- Max Dual Supply Voltage :
- 6.3 V
- Max Supply Voltage :
- 12.6 V
- Min Dual Supply Voltage :
- 1.25 V
- Slew Rate :
- 25V/µs
- Shutdown :
- No Shutdown
- Terminal Pitch :
- 1.27 mm
- Width :
- 3.9 mm
- Power Supply Rejection Ratio (PSRR) :
- 60 dB
- Peak Reflow Temperature (Cel) :
- 260
- Base Product Number :
- LT6203
- Number of Elements :
- 2
- Subcategory :
- Amplifier ICs
- Current - Input Bias :
- 3.8 µA
- Schedule B :
- 8542330000/8542330000/8542330000/8542330000/8542330000
- Terminal Form :
- Gull wing
- Number of Terminals :
- 8
- Mounting Type :
- Surface Mount
- Input Offset Voltage-Max :
- 7500 µV
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Length :
- 4.9 mm
- Terminal Position :
- Dual
- Number of Channels :
- 2
- Package Shape :
- RECTANGULAR
- Brand :
- Analog Devices
- Package :
- Tube
- JESD-609 Code :
- e3
- Gain Bandwidth Product :
- 100 MHz
- Output Type :
- Rail-to-Rail
- Input Offset Voltage (Vos) :
- 500 µV
- Minimum Operating Temperature :
- - 40 C
- Current - Output / Channel :
- 40 mA
- Neg Supply Voltage-Nom (Vsup) :
- -5 V
- JESD-30 Code :
- R-PDSO-G8
- Surface Mount :
- yes
- Product Status :
- Active
- Number of Circuits :
- 2
- Pin Count :
- 8
- Max Operating Temperature :
- 85 °C
- Lead Free :
- Lead Free
- Datasheets
- LT6203IS8#PBF

2 Channels 40 mA per Channel 3.8 µA 60 dB Instrumentational OP Amps 3.6 µA 8 Pins 8-SOIC (0.154, 3.90mm Width)
LT6203IS8#PBF Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. There are a total of 8 pins on this op amp. It should be noted that this op amp is a type of Amplifier ICs device. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 500 µV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C ~ 85°C . An 2.8 mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85 °C. There are a total of 2 elements in this linear amplifier. As a recommendation, this electronic component should be used with a power supply that can deliver 2.8mA (x2 Channels). I would like to point out that this electrical component is capable of working from a voltage below 12.6 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.5 V at all times. The dual supply voltage of 6.3 V should be used for the conduct of this electronic component. The LT® indicates the series number of the op amp. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
LT6203IS8#PBF Features
8 Pins
96.9 dB voltage gain
Output Type: Rail-to-Rail
8Terminations
LT6203IS8#PBF Applications
There are a lot of Analog Devices
LT6203IS8#PBF Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















