LT1013DS8#TRPBF
- Mfr.Part #
- LT1013DS8#TRPBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SO
- Stock
- 26,285
- In Stock :
- 26,285
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Shutdown :
- No Shutdown
- Frequency Compensation :
- yes
- Manufacturer Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Voltage Gain :
- 120 dB
- Input Bias Current :
- 15 nA
- Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Output Type :
- -
- Power Supply Rejection Ratio (PSRR) :
- 100 dB
- Pin Count :
- 8
- Gain Bandwidth Product :
- 1 MHz
- Voltage Gain-Min :
- 500000
- Terminal Position :
- Dual
- Brand Name :
- Linear Technology
- Average Bias Current-Max (IIB) :
- 0.038 µA
- Max Junction Temperature (Tj) :
- 150 °C
- Terminal Pitch :
- 1.27 mm
- Number of Terminals :
- 8
- Packing Method :
- Tape and Reel
- Product Status :
- Active
- Common Mode Rejection Ratio :
- 97 dB
- RoHS :
- Details
- Height :
- 1.75 mm
- Reach Compliance Code :
- Compliant
- Min Operating Temperature :
- 0 °C
- Operating Temperature :
- 0°C ~ 70°C
- Neg Supply Voltage-Nom (Vsup) :
- -15 V
- Number of Elements :
- 2
- ECCN Code :
- EAR99
- Amplifier Type :
- GENERAL PURPOSE
- Operating Supply Voltage :
- 5 V
- Radiation Hardening :
- No
- Operating Supply Current :
- 350 uA
- Input Offset Voltage-Max :
- 400 µV
- Architecture :
- VOLTAGE-FEEDBACK
- Max Supply Voltage :
- 44 V
- Number of Circuits :
- 2
- Minimum Operating Temperature :
- 0 C
- Input Offset Voltage (Vos) :
- 40 µV
- Supplier Device Package :
- 8-SO
- Subcategory :
- Amplifier ICs
- Package Shape :
- RECTANGULAR
- JESD-30 Code :
- R-PDSO-G8
- Supply Current-Max :
- 1.2 mA
- Max Operating Temperature :
- 70 °C
- Common-mode Reject Ratio-Min :
- 97 dB
- Slew Rate-Min :
- 0.2 V/us
- Packaging :
- MouseReel
- Manufacturer :
- Analog Devices Inc.
- Low-Offset :
- No
- Lead Free :
- Lead Free
- Mounting Style :
- SMD/SMT
- Power Supplies :
- 5/+-15 V
- Current - Output / Channel :
- 20 mA
- Number of Functions :
- 2
- Nominal Gain Bandwidth Product :
- 800 kHz
- Product Category :
- Precision Amplifiers
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Min Supply Voltage :
- 4 V
- Number of Channels :
- 2 Channel
- Number of Pins :
- 8
- Terminal Form :
- Gull wing
- Mounting Type :
- Surface Mount
- Dual Supply Voltage :
- 15 V
- Peak Reflow Temperature (Cel) :
- 260
- Brand :
- Analog Devices
- Max Dual Supply Voltage :
- 22 V
- Slew Rate :
- 0.4V/µs
- Programmable Power :
- No
- Product Type :
- Precision Amplifiers
- Bias Current-Max (IIB) @25C :
- 0.05 µA
- Maximum Operating Temperature :
- + 70 C
- Voltage - Input Offset :
- 60 µV
- Width :
- 3.895 mm
- Min Dual Supply Voltage :
- 2 V
- Technology :
- Bipolar
- Nominal Supply Current :
- 350 µA
- Supply Voltage Limit-Max :
- 22 V
- Base Product Number :
- LT1013
- Power :
- No
- Micropower :
- yes
- JESD-609 Code :
- e3
- Seated Height-Max :
- 1.752 mm
- Low-Bias :
- No
- Temperature Grade :
- COMMERCIAL
- HTS Code :
- 8542.39.00.01
- Current - Supply :
- 350µA (x2 Channels)
- Length :
- 4.903 mm
- Series :
- LT®
- Surface Mount :
- yes
- Current - Input Bias :
- 15 nA
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Wideband :
- No
- Output Current per Channel :
- 25 mA
- Qualification Status :
- Not Qualified
- Terminal Finish :
- Matte Tin (Sn)
- Datasheets
- LT1013DS8#TRPBF

2 Channel Channels 25 mA per Channel 15 nA 97 dB Instrumentational OP Amps 0.038 µA 5 V 8 Pins 8-SOIC (0.154, 3.90mm Width)
LT1013DS8#TRPBF Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a MouseReel case. A total of 8 pins are attached to buffer op amp. A type of Amplifier ICs op amp ic can be identified by the fact that this is a type of Amplifier ICs device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 40 µV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C ~ 70°C. A supply current of 350 uA can be used to operate this linear amplifier. There should be no change in the voltage gain at 120 dB. This op amp ic has 2 circuits. There are a total of 2 Channel channels available on the op amps. One of its many advantages is that buffer op amp outputs - signals. This instrumentation amplifier cannot operate below 0 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70 °C. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5 V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. For optimal performance, this electrical part should be connected to a supply with a current of 350µA (x2 Channels). It is important to keep in mind that the power supply voltage of this electric component is below 44 V, which is suitable. Keeping the linear amplifier's supply voltage above 4 V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 22 V volts. Buffer op amp series numbers are indicated by the LT®. This op amp ic can conduct a minimum voltage gain of 500000. There are 8 wire terminals on this op amp ic.
LT1013DS8#TRPBF Features
8 Pins
120 dB voltage gain
Output Type: -
8Terminations
LT1013DS8#TRPBF Applications
There are a lot of Analog Devices
LT1013DS8#TRPBF Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















