LPC4370FET100E
Or copy the link below:
- Mfr.Part #
- LPC4370FET100E
- Manufacturer
- NXP Semiconductors
- Package / Case
- 100-TFBGA
- Datasheet
- Download
- Description
- IC MCU 32BIT ROMLESS 100TFBGA
- Stock
- 851
- In Stock ：
- 851
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- NXP Semiconductors
- Product Category :
- Microcontrollers
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- ROM (words) :
- 0
- Published :
- 2010
- Peripherals :
- Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT
- Peak Reflow Temperature (Cel) :
- NOT SPECIFIED
- Package / Case :
- 100-TFBGA
- Power Supplies :
- 2.5/3.3V
- Moisture Sensitivity Level (MSL) :
- 3 (168 Hours)
- Supply Voltage-Min (Vsup) :
- 2.2V
- Program Memory Type :
- ROMless
- RAM (bytes) :
- 288768
- RAM Size :
- 282K x 8
- Surface Mount :
- yes
- Supply Voltage-Max (Vsup) :
- 3.6V
- Speed :
- 204MHz
- ROM Programmability :
- Flash
- Mounting Type :
- Surface Mount
- uPs/uCs/Peripheral ICs Type :
- MICROCONTROLLER, RISC
- Data Converter :
- A/D 3x12b; D/A 1x10b
- CPU Family :
- CORTEX-M4F
- Has ADC :
- yes
- Series :
- LPC43xx
- Oscillator Type :
- Internal
- Pin Count :
- 100
- RoHS Status :
- ROHS3 Compliant
- Clock Frequency :
- 25MHz
- Terminal Pitch :
- 0.8mm
- Number of I/O :
- 49
- Core Size :
- 32-Bit Tri-Core
- PWM Channels :
- yes
- Voltage - Supply (Vcc/Vdd) :
- 2.2V~3.6V
- JESD-30 Code :
- S-PBGA-B100
- Connectivity :
- CANbus, EBI/EMI, Ethernet, I2C, IrDA, SD, SPI, SSC, UART/USART, USB
- DMA Channels :
- yes
- Number of Terminations :
- 100
- Bit Size :
- 32
- Width :
- 9mm
- DAC Channels :
- yes
- Height Seated (Max) :
- 1.2mm
- Supply Voltage :
- 3.3V
- Factory Lead Time :
- 12 Weeks
- Operating Temperature :
- -40°C~85°C TA
- Packaging :
- Tray
- Length :
- 9mm
- Terminal Position :
- BOTTOM
- Terminal Form :
- Ball
- Core Processor :
- ARM® Cortex®-M4/M0/M0
- Qualification Status :
- Not Qualified
- Datasheets
- LPC4370FET100E
ROMless ARM® Cortex®-M4/M0/M0 32-Bit Tri-Core Microcontroller LPC43xx Series 3.3V 100-TFBGA
LPC4370FET100E Description
The LPC4370FET100E is an Arm Cortex-M4-based microcontroller for embedded applications. It features an Arm Cortex-M0 coprocessor, an Arm Cortex-M0 subsystem for managing peripherals, 282 kB of SRAM, advanced configurable peripherals like the State Configurable Timer (SCT), Serial General Purpose I/O (SGPIO) interface, two High-speed USB controllers, Ethernet, LCD, an external memory controller, and numerous digital Up to 204 MHz of CPU frequency can be used by the LPC4370.
With system improvements like reduced power consumption, improved debug tools, and a high level of support block integration, the Arm Cortex-M4 is a next-generation 32-bit core. The Harvard architecture, 3-stage pipeline, separate local instruction and data buses, third bus for peripherals, and internal prefetch unit with capability for speculative branching are all features of the Arm Cortex-M4 CPU. Single-cycle digital signal processing and SIMD instructions are supported by the Arm Cortex-M4 processor. The core contains an integrated hardware floating-point processor.
An application Arm Cortex-M0 coprocessor and a second Arm Cortex-M0 subsystem for controlling the SGPIO and SPI peripherals are both included in the LPC4370FET100E. The 32-bit Arm Cortex-M0 core is a low-power, user-friendly core that is code and tool compatible with the Cortex-M4 core. The performance of both Cortex-M0 cores, which have a small code size and a limited instruction set, is up to 204 MHz.
LPC4370FET100E Features
-
On-chip memory:
264 kB SRAM for code and data use on the main AHB multilayer matrix plus 18 kB of SRAM on the Cortex-M0 subsystem
Multiple SRAM blocks with separate bus access. Two SRAM blocks can be powered down individually
64 kB ROM containing boot code and on-chip software drivers
64-bit + 256 bit general-purpose One-Time Programmable (OTP) memory
-
Configurable digital peripherals:
Serial GPIO (SGPIO) interface
State Configurable Timer (SCT) subsystem on AHB
Global Input Multiplexer Array (GIMA) allows to cross-connect multiple inputs and outputs to event driven peripherals like the timers, SCT, and ADC0/1
-
Main Cortex-M4 processor:
Arm Cortex-M4 processor, running at frequencies of up to 204 MHz
Arm Cortex-M4 built-in Memory Protection Unit (MPU) supporting eight regions
Arm Cortex-M4 built-in Nested Vectored Interrupt Controller (NVIC)
Hardware floating-point unit
Non-maskable Interrupt (NMI) input
JTAG and Serial Wire Debug (SWD), serial trace, eight breakpoints, and four watch points
Enhanced Trace Module (ETM) and Enhanced Trace Buffer (ETB) support
System tick timer
-
Cortex-M0 coprocessor:
Arm Cortex-M0 coprocessor capable of off-loading the main Arm Cortex-M4 processor
Running at frequencies of up to 204 MHz
JTAG and built-in NVIC
Cortex-M0 subsystem:
Arm Cortex-M0 processor controlling the SPI and SGPIO peripherals residing on a separate AHB multilayer matrix with direct access to 2 kB + 16 kB of SRAM
Running at frequencies of up to 204 MHz
Connected via a core-to-core bridge to the main AHB multilayer matrix and the main Arm Cortex-M4 processor
JTAG and built-in NVIC
LPC4370FET100E Applications
-
RFID readers
-
Embedded audio applications
-
Industrial automation
-
e-metering
-
Motor control
-
Power management
-
White goods
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
