IXDS502D1B
Or copy the link below:
- Mfr.Part #
- IXDS502D1B
- Manufacturer
- Littelfuse
- Package / Case
- 6-VDFN Exposed Pad
- Datasheet
- Download
- Description
- IC PWR DRIVER 1:1 6DFN
- Stock
- 25,979
- In Stock ：
- 25,979
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Littelfuse
- Product Category :
- Power Distribution Switches, Load Drivers
- Width :
- 2mm
- Output Current per Channel :
- 500mA
- Surface Mount :
- yes
- Temperature Grade :
- Military
- Qualification Status :
- Not Qualified
- Terminal Position :
- Dual
- Number of Drivers :
- 1
- Base Part Number :
- IXD*502
- Voltage - Load :
- 4.5V~25V
- Fault Protection :
- --
- Mount :
- Surface Mount
- Nominal Supply Current :
- 2mA
- Package :
- Bulk
- Voltage - Supply (Vcc/Vdd) :
- Not Required
- Seated Height-Max :
- 1 mm
- Operating Temperature :
- -55°C~125°C TA
- Reach Compliance Code :
- Compliant
- Current - Output (Max) :
- 500mA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- RoHS Status :
- RoHS Compliant
- Mounting Type :
- Surface Mount
- Turn Off Time :
- 0.035 µs
- Resistance :
- 4Ohm
- ECCN Code :
- EAR99
- Fall Time (Typ) :
- 10 ns
- Supply Voltage :
- 15V
- Number of Functions :
- 1
- Input Type :
- Non-Inverting
- Peak Reflow Temperature (Cel) :
- NOT SPECIFIED
- Length :
- 2mm
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Published :
- 2007
- Pin Count :
- 6
- Manufacturer :
- IXYS Corporation
- Supply Voltage-Min (Vsup) :
- 4.5V
- Switch Type :
- GENERAL PURPOSE
- Turn On Time :
- 0.04 µs
- RoHS :
- Compliant
- Supplier Device Package :
- 6-DFN (4x5)
- HTS Code :
- 8542.39.00.01
- Base Product Number :
- IXDS502
- Number of Pins :
- 6
- Rds On (Typ) :
- 3 Ω
- Number of Terminations :
- 6
- Max Output Current :
- 2A
- Min Supply Voltage :
- 4.5 V
- Interface :
- On/Off
- Features :
- --
- Package / Case :
- 6-VDFN Exposed Pad
- Series :
- --
- High Side Driver :
- No
- Supply Voltage-Max (Vsup) :
- 25V
- Terminal Pitch :
- 0.5mm
- Number of Outputs :
- 1
- JESD-30 Code :
- S-XDSO-N6
- Rise Time :
- 12ns
- Terminal Form :
- NO LEAD
- Number of Terminals :
- 6
- Min Operating Temperature :
- -55 °C
- Output Type :
- --
- Interface IC Type :
- BUFFER OR INVERTER BASED MOSFET DRIVER
- Packaging :
- Bulk
- Product Status :
- Obsolete
- Output Peak Current Limit-Nom :
- 2A
- Ratio - Input:Output :
- 1:1
- Max Operating Temperature :
- 125 °C
- Output Configuration :
- Low Side
- Package Shape :
- Square
- Datasheets
- IXDS502D1B
-- 0.5mm PMIC -- Series IXD*502 6 Pin 15V 6-VDFN Exposed Pad
IXDS502D1B Overview
The LED driver's packaged as a Bulk.The 6-VDFN Exposed Pad package contains it.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -55°C~125°C TA.There is a default setting of 1 for output.To operate, it needs a supply voltage of Not Required.The maximum output voltage is -- volts.This object belongs to the IXD*502 family.It contains 6 terminations.For operation, 6 pins are used.The LED driver has 1 functions.Its maximum output voltage is 500mAV.The maximum output current drops to 2A in order to meet the operation criteria.A supply voltage of 15V leads to high efficiency.The lighting driver is mounted in the way of Surface Mount.There are 6 pins in total on this board.There is 4Ohm resistance on the LED driver.This electrical component is included in the -- series.The maximum supply voltage is set to 25V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.5V.It is recommended that the maximum operating temperature be 125 °C°C to ensure stable operation.Ensure reliability by operating at a minimum temperature of -55 °C degrees Celsius.A supply voltage of 4.5 VV is sufficient for it to work.The interface to the LED driver is of type BUFFER OR INVERTER BASED MOSFET DRIVER.There are 1 drivers associated with the part.
IXDS502D1B Features
Supplied from 15V
Resistance of 4Ohm
IXDS502D1B Applications
There are a lot of IXYS
IXDS502D1B Power Switches ICs applications.
- Portable GPS Device
- Set-top-box
- USB Power Distribution
- Notebook PC
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
| Part | Manufacturer | Stock | Description |
|---|---|---|---|
| IXDS430SI | Littelfuse | 8,016 | IC GATE DRVR LOW-SIDE 28SOIC |
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
