INA326EA/250
Or copy the link below:
- Mfr.Part #
- INA326EA/250
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC INST AMP 1 CIRCUIT 8VSSOP
- Stock
- 16,160
- In Stock ：
- 16,160
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage - Input Offset :
- 20µV
- Voltage Gain :
- 80dB
- RoHS Status :
- ROHS3 Compliant
- Terminal Pitch :
- 0.65mm
- Pin Count :
- 8
- Input Offset Voltage (Vos) :
- 100μV
- Surface Mount :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 93.98dB
- Quiescent Current :
- 2.4mA
- Supply Voltage Limit-Max :
- 5.5V
- Pbfree Code :
- yes
- Voltage Gain-Nom :
- 100
- Contact Plating :
- Gold
- Packing Method :
- TR
- Output Type :
- Rail-to-Rail
- Current - Input Bias :
- 200pA
- Supply Voltage :
- 5V
- Input Offset Current-Max (IIO) :
- 0.002μA
- Bandwidth :
- 1 kHz
- Operating Temperature :
- -40°C~85°C
- Nominal Supply Current :
- 2.4mA
- Factory Lead Time :
- 6 Weeks
- Operating Supply Current :
- 2.4mA
- Gain Bandwidth Product :
- 1 kHz
- REACH SVHC :
- No SVHC
- Moisture Sensitivity Level (MSL) :
- 2 (1 Year)
- Average Bias Current-Max (IIB) :
- 0.002μA
- Packaging :
- Cut Tape (CT)
- Lifecycle Status :
- ACTIVE (Last Updated: 4 days ago)
- Terminal Form :
- Gull wing
- Resistance :
- 10GOhm
- Weight :
- 25.996513mg
- Voltage - Supply, Single/Dual (±) :
- 2.7V~5.5V ±1.35V~2.75V
- Width :
- 3mm
- Height :
- 1.07mm
- Thickness :
- 970μm
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- ECCN Code :
- EAR99
- Amplifier Type :
- Instrumentation
- Number of Terminations :
- 8
- Number of Pins :
- 8
- Length :
- 3mm
- Terminal Position :
- Dual
- -3db Bandwidth :
- 0.001MHz
- Peak Reflow Temperature (Cel) :
- 260
- Common Mode Rejection Ratio :
- 100 dB
- JESD-609 Code :
- e4
- Number of Channels :
- 1
- Power Supplies :
- 3/5V
- Radiation Hardening :
- No
- Lead Free :
- Lead Free
- Output Current per Channel :
- 25mA
- Number of Functions :
- 1
- Base Part Number :
- INA326
- Mounting Type :
- Surface Mount
- Datasheets
- INA326EA/250
1 Channels 25mA per Channel 200pA 100 dB Instrumentational OP Amps 0.002μA 2.7V~5.5V ±1.35V~2.75V INA326 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
INA326EA/250 Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 100μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.4mA and 10 . Maintain 80dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a result of this, the buffer amplifier is packed in TR. There is an 2.4mA quiescent current in linear amplifier. It is important to keep the resistance within the 10GOhm range of the op amps.
INA326EA/250 Features
8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10GOhm
INA326EA/250 Applications
There are a lot of Texas Instruments
INA326EA/250 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
