INA155EA/250
Or copy the link below:
- Mfr.Part #
- INA155EA/250
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC INST AMP 1 CIRCUIT 8VSSOP
- Stock
- 7,397
- In Stock ：
- 7,397
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Height :
- 1.07mm
- Nominal Supply Current :
- 2.1mA
- Average Bias Current-Max (IIB) :
- 0.00005μA
- Terminal Pitch :
- 0.65mm
- Base Part Number :
- INA155
- Slew Rate :
- 6.5V/µs
- Lead Free :
- Lead Free
- Common Mode Rejection Ratio :
- 80 dB
- Pin Count :
- 8
- Length :
- 3mm
- RoHS Status :
- ROHS3 Compliant
- Gain Bandwidth Product :
- 550 kHz
- Peak Reflow Temperature (Cel) :
- 260
- Operating Temperature :
- -55°C~125°C
- JESD-609 Code :
- e4
- Number of Functions :
- 1
- Thickness :
- 970μm
- Power Supply Rejection Ratio (PSRR) :
- 86.02dB
- REACH SVHC :
- No SVHC
- Supply Voltage :
- 5V
- ECCN Code :
- EAR99
- Packing Method :
- TR
- Output Type :
- Rail-to-Rail
- Number of Terminations :
- 8
- Number of Pins :
- 8
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Non-linearity-Max :
- 0.05%
- Supply Voltage Limit-Max :
- 7.5V
- Mounting Type :
- Surface Mount
- Resistance :
- 10 TΩ
- Radiation Hardening :
- No
- Moisture Sensitivity Level (MSL) :
- 2 (1 Year)
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Number of Elements :
- 2
- Voltage - Input Offset :
- 200μV
- Current - Output / Channel :
- 50mA
- Voltage Gain-Nom :
- 10
- Terminal Position :
- Dual
- Input Offset Voltage (Vos) :
- 1mV
- Terminal Form :
- Gull wing
- Voltage Gain :
- 33.98dB
- Packaging :
- Cut Tape (CT)
- Amplifier Type :
- Instrumentation
- Surface Mount :
- yes
- Factory Lead Time :
- 6 Weeks
- Number of Circuits :
- 1
- Current - Input Bias :
- 1pA
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Weight :
- 25.996513mg
- Voltage - Supply, Single/Dual (±) :
- 2.7V~5.5V ±1.35V~2.75V
- Power Supplies :
- 3/5V
- Pbfree Code :
- yes
- Bandwidth :
- 550 kHz
- Width :
- 3mm
- -3db Bandwidth :
- 0.55MHz
- Quiescent Current :
- 1.7mA
- Datasheets
- INA155EA/250
1pA 80 dB Instrumentational OP Amps 0.00005μA 2.7V~5.5V ±1.35V~2.75V INA155 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
INA155EA/250 Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -55°C~125°C for optimal performance. Maintain 33.98dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 2 elements that make up this buffer amplifier. As a result of this, the buffer amplifier is packed in TR. There is an 1.7mA quiescent current in linear amplifier. It is important to keep the resistance within the 10 TΩ range of the op amps.
INA155EA/250 Features
8 Pins
supply voltage of 5V
33.98dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
INA155EA/250 Applications
There are a lot of Texas Instruments
INA155EA/250 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
