INA121PA
Or copy the link below:
- Mfr.Part #
- INA121PA
- Manufacturer
- Texas Instruments
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC INST AMP 1 CIRCUIT 8DIP
- Stock
- 469
- In Stock ：
- 469
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Neg Supply Voltage-Nom (Vsup) :
- -15V
- Non-linearity-Max :
- 0.005%
- Voltage - Input Offset :
- 300µV
- Voltage Gain :
- 80dB
- Termination :
- Through Hole
- Factory Lead Time :
- 6 Weeks
- Input Offset Voltage (Vos) :
- 1mV
- Gain Bandwidth Product :
- 600 kHz
- REACH SVHC :
- No SVHC
- Voltage Gain-Nom :
- 10
- Slew Rate :
- 0.7V/μs
- JESD-609 Code :
- e4
- Number of Terminations :
- 8
- Common Mode Rejection Ratio :
- 90 dB
- -3db Bandwidth :
- 0.6MHz
- Input Offset Current-Max (IIO) :
- 5e-7μA
- Surface Mount :
- No
- Gain :
- 10000 dB
- Nominal Supply Current :
- 525μA
- Height :
- 5.08mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Thickness :
- 3.9mm
- Packaging :
- Tube
- Pbfree Code :
- yes
- Amplifier Type :
- Instrumentation
- Current - Input Bias :
- 4pA
- Bandwidth :
- 600 kHz
- Input Voltage Noise Density :
- 20nV/sqrt Hz
- Terminal Pitch :
- 2.54mm
- Terminal Position :
- Dual
- Number of Functions :
- 1
- Dual Supply Voltage :
- 15V
- Number of Channels :
- 1
- Operating Supply Current :
- 450μA
- Max Supply Current :
- 525μA
- Lead Free :
- Lead Free
- Base Part Number :
- INA121
- Operating Temperature :
- -40°C~85°C
- Quiescent Current :
- 450μA
- Width :
- 6.35mm
- Radiation Hardening :
- No
- Output Current per Channel :
- 14mA
- Supply Voltage :
- 15V
- Length :
- 9.81mm
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Mounting Type :
- Through Hole
- Pin Count :
- 8
- Voltage - Supply, Single/Dual (±) :
- 4.5V~36V ±2.25V~18V
- Number of Pins :
- 8
- ECCN Code :
- EAR99
- RoHS Status :
- ROHS3 Compliant
- Resistance :
- 1 TΩ
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Weight :
- 528.605208mg
- Average Bias Current-Max (IIB) :
- 0.00005μA
- Number of Elements :
- 3
- Lifecycle Status :
- ACTIVE (Last Updated: 1 day ago)
- Datasheets
- INA121PA
1 Channels 14mA per Channel 4pA 90 dB Instrumentational OP Amps 0.00005μA 4.5V~36V ±2.25V~18V INA121 8 Pins 8-DIP (0.300, 7.62mm)
INA121PA Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a Instrumentation-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1mV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 450μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 80dB. There are a total of 1 channels available on the op amps. There are 3 elements in this buffer amplifier. The quiescent current is 450μA. It is important that the op amp resistance stays within the range of 1 TΩ.
INA121PA Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1 TΩ
INA121PA Applications
There are a lot of Texas Instruments
INA121PA Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
