EL1516IYZ-T13
- Mfr.Part #
- EL1516IYZ-T13
- Manufacturer
- Elantec
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP DIFF 2 CIRCUIT 8MSOP
- Stock
- 3,348
- In Stock :
- 3,348
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Elantec
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- -3db Bandwidth :
- 350 MHz
- Voltage - Input Offset :
- 200 µV
- Min Dual Supply Voltage :
- 2.5 V
- Input Offset Voltage (Vos) :
- 100 µV
- Max Operating Temperature :
- 85 °C
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Operating Supply Current :
- 5.8 mA
- Min Supply Voltage :
- 5 V
- Mounting Type :
- Surface Mount
- Slew Rate :
- 128 V/µs
- Number of Circuits :
- 2
- Lead Free :
- Lead Free
- Voltage Gain :
- 80 dB
- Number of Pins :
- 8
- Common Mode Rejection Ratio :
- 90 dB
- Radiation Hardening :
- No
- Output Type :
- -
- Current - Input Bias :
- 6.5 µA
- Max Dual Supply Voltage :
- 6 V
- Min Operating Temperature :
- -40 °C
- Gain Bandwidth Product :
- 250 MHz
- Max Supply Voltage :
- 12 V
- Supplier Device Package :
- 8-MSOP
- RoHS :
- Compliant
- Package :
- Bulk
- Output Current per Channel :
- 160 mA
- Input Bias Current :
- 6.5 µA
- Series :
- -
- Operating Temperature :
- -40°C ~ 85°C
- Mount :
- Surface Mount
- Current - Output / Channel :
- 160 mA
- Packaging :
- Tape and Reel (TR)
- Current - Supply :
- 5.7mA (x2 Channels)
- Product Status :
- Obsolete
- Amplifier Type :
- Differential
- Datasheets
- EL1516IYZ-T13

160 mA per Channel 6.5 µA 90 dB Instrumentational OP Amps 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
EL1516IYZ-T13 Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A Differential-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 100 µV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C ~ 85°C as far as operating temperature is concerned. Using a supply current of 5.8 mA , this buffer op amp will be able to operate. Keeping the voltage gain at 80 dB is the best course of action. The buffer amp consists of 2 circuits in total. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs - signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 85 °C degrees. A supply of 5.7mA (x2 Channels) or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 12 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 5 V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 6 V volts for this part. The - stands for the buffer op amp's serial number.
EL1516IYZ-T13 Features
80 dB voltage gain
Output Type: -
EL1516IYZ-T13 Applications
There are a lot of Elantec
EL1516IYZ-T13 Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
| Part | Manufacturer | Stock | Description |
|---|---|---|---|
| EL1501CM | Elantec | 6,936 | Instrumentational OP Amps SOP |
| EL1503ACL | Elantec | 28,399 | IC DRIVER 2/0 24QFN |
| EL1503ACL-T13 | Elantec | 3,316 | IC DRIVER 2/0 24QFN |
| EL1503ACL-T7 | Elantec | 2,939 | IC DRIVER 2/0 24QFN |
| EL1503ACLZ | Elantec | 419 | IC DRIVER 2/0 24QFN |
| EL1503ACLZ | Elantec | 10,304 | IC DRIVER 2/0 24QFN |
| EL1503ACLZ-T13 | Elantec | 42,305 | IC DRIVER 2/0 24QFN |
| EL1503ACLZ-T7 | Elantec | 26,820 | IC DRIVER 2/0 24QFN |
| EL1503ACM | Elantec | 212 | IC DRIVER FULL 2/0 20SOIC |
| EL1503ACM | Elantec | 45,849 | IC DRIVER 2/0 20SO |
| EL1503ACM-T13 | Elantec | 4,081 | IC DRIVER 2/0 20SO |
| EL1503ACM-T13 | Elantec | 4,081 | IC DRIVER 2/0 20SO |
| EL1503ACMZ | Elantec | 10,954 | IC DRIVER 2/0 20SO |
| EL1503ACMZ | Elantec | 22,765 | IC DRIVER 2/0 20SO |
| EL1503ACMZ-T13 | Elantec | 16,712 | IC DRIVER 2/0 20SO |
















